Troubleshooting Dim LED Tail Lights On One Side Of Boat Trailer
Updated 04/02/2015 | Published 04/01/2015 >
Question:
I put a submergible led kit on my boat trailer one light is a little bit dimmer than the other one what would that be caused for it to do that??
asked by: Robert S
Expert Reply:
Many times the issue with a dim light on one side or the other is caused by a poor ground connection. You will want to inspect all of the ground locations as well as the ground wires coming from each light. Check for loose connections or pinched or bare wires. Since you said it is a submergible light, check to make sure the light housing has not been damaged and no water has managed to get inside the housing.
If the lights on your trailer use a plug-in style pigtail harness look for damaged or bent pins.
If you have an aluminum trailer, make sure you have a ground wire run to all of the lights from the ground wire on the connector.
If everything checks out okay, you may just have a bad light and it will need to be replaced.
Product Page this Question was Asked From
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop
- Tail
- Turn
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Continue Researching
- Video: Let’s Check Out the Mini LED Clearance or Side Marker Trailer Light
- Shop: Mini LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Amber Lens
- Search Results: submersible led trailer lights
- Q&A: Procedure to Re-Install Trailer Side Marker Lights
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Does etrailer Trailer Hitch Receiver for 2018 Dodge Journey Include Fishwire
- Q&A: Will A Spare Tire With A Higher Load Rating Be Ok On A 2022 Aluma 7814ST?
- Q&A: How Does the Submersible, Under 80" LED Trailer Light Kit part # TLL9RK Wire to Trailer
- Q&A: How Do I Measure To Find The Correct Bolt Pattern For My Wheel?
- Q&A: Parts Needed To Switch Trailer From Standard Ball Coupler To Pintle Hitch System
- Article: Trailer Maintenance Schedule
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Availability Of 2-5/16" A-Frame Coupler With Holes That Match Bulldog BD43805W0317
- Article: How to Measure Your Trailer Wheel Bolt Pattern

