Hub Dimensions Of Titan 2,000 Trailer Hub Assenmbly
Updated 02/27/2015 | Published 02/26/2015
Question:
What is the outer diameter of the hub surface that contacts the wheel?
asked by: Kevin
1
Helpful Expert Reply:
I called Titan about the Titan Trailer Hub Assembly, part # T4084600042, and to get some of the dimensions you need.
I have attached a photo that has the dimensions noted. The outside diameter of the hub is 5.69 inches and the outside diameter of the hub portion that the pilot hole of your wheel slips over is 2-1/2 inches.
expert reply by:
Jeffrey L
1
click to enlarge
Product Page this Question was Asked From
Dexter Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Iron
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Correct Bearing Kit for a 2001 Karavan Single Axle Jetski Trailer
- Q&A: Mounting a Marker Light at a 45 Degree Angle at the Back of a Trailer
- Q&A: Recommended 5 Lug Hub for a Spindle w/ 141125 Inner and 09067 Outer Bearings
- Q&A: What Tire Size Replaces an Old A78-13 Tire Size
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: How to Identify Correct Replacement Hub Based on Bearing Part Number or Spindle Dimensions
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub