Hey Yussel, congrats on the new hobby. To replace the bearings on your 2020 Apex Nano 213RDS you'll need the inner bearing item #L68149 and the outer bearing item #L44649. The inner one is bigger so it will be closest to the trailer on the inside…
I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…
We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…
Hey Lucas, It looks like both the Redarc #RED72CR and #RED68CR are going to include the same wire harness #RED99FR, but the #RED72CR is also going to include some mounting panels to make mounting the control knob into your dash easier so I'd go…
Hey Barry, it sounds like you're looking for the Dexter Electric Trailer Brakes #K23-472-473-00. These are Dexter brakes that measure 10" diameter x 1-1/2" wide, and are designed for 3,000 lb axles.
Hey Jared, I would recommend using ring terminals to make all of the wired connections to the junction of the etrailer part #e99011 which will allow you to keep the wires from touching each other and also allow for a solid connection. Do you run that…
Hello Mr P, I reached out to my contact at Malone, he informed me that on the EcoLight Trailers you cannot go larger than a 8" wheel. With that being said, you cannot put the #AM35354 on your EcoLight. For your Malone EcoLight I recommend the…
Hi Rusty; the Dexter #84546UC3-EZ and etrailer #AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern…
Yes, the castle nut and lock washer for the spindle will be included with the Dexter Trailer Axle Beam part #7685269. The spring seats and brake flanges are already welded on so you do not have to worry about that. Assuming you have the standard 5 on…
Thanks so much for all that specific info and we do have exactly what you need for the hub and drum and self-adjusting electric brakes for your trailer with a 3,500 lb axle. The exact parts you need are the following: - Dexter Trailer Hub and Drum…
We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part #23-26 for the Left Hand side and part #23-27 for the Right Hand side. Their Nev-R-Adjust…
Unfortunately your pictures are not working, but you provided me with enough information that I can make a recommendation for you. There are a few different parts you will need to add brakes to your trailer that has a 3500 lb. Dexter Axle. Brake…
