The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Marco, thanks for reaching out! To get all of the wiring and such on your 2017 Hyundai Santa Fe you'll need the following: - Curt Wiring Connector #C59236 - Universal Installation Kit #ETBC7 - Tekonsha Voyager iD Brake Controller #TK26BR -…
The best trailer hitch for a 2020 Hyundai Santa Fe is the Draw-Tite Trailer Hitch Receiver #75908 because it an easy, bolt-on installation, provides the most ground clearance of any hitch for your Santa Fe and has a tab which will let you very easily…
The Kuat Sherpa 2.0 #SH22B and NV 2.0 Base #BA22B bike racks are both excellent bike racks but in my opinion the NV 2.0 just edges out the Sherpa 2.0 due to a few key features. As-is the Sherpa 2.0 can handle 40 lb bikes with a max wheelbase of…
Thank you for the kind words! We stand behind the products we offer and will always go above and beyond to fix an issue should one arise like a nut or bolt being incorrect or missing. While this is not a common thing, mistakes do happen. I was unable…
You have no worries regarding the recall of your 2020 Hyundai Santa Fe and an aftermarket trailer wiring harness like the Curt #CU94FR. That issue is with the module on the OEM Hyundai harness that plugs into the port.
The 7-way adapter I recommend to connect to your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56434, is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires #ETBC7L. I recommend this upgrade kit…
The correct wiring kit for your 2020 Hyundai Santa Fe with the factory tow package is the Curt T-Connector. I have attached an installation video of this on a '19 Santa Fe that you can check out. If you'd like to mount the wiring next to your…
In order to tow a trailer with a 2019 Hyundai Santa Fe you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part #e98843 which offers a direct bolt-on fit. It has a 2" opening with…
The etrailer Trailer Hitch Receiver item #e98843 is the same hitch as the Curt item #C13195 except for the different powder coating. The etrailer hitch will have the same exact dimensions as the Curt. I have included a diagram I made that will show…
I recommend tracing the wiring from the 4-pole connector back to see if it plugs into a connector or if it's hardwired to your tail lights before purchasing anything. The wire harness would get all the signals right at the tail lights if it was…
