Custom Fit 2005 Dodge Ram Pickup Accessories

The Curt Class IV Trailer Hitch #14374 really shouldn't look crooked when mounted to your 2019 Ram 1500 Classic. The frame brackets on each side of the hitch are of an equal height so unless something was off on the frame rails of the truck the…

For your 2012 Ram 2500, you are correct that either suspension enhancement system will work. However there are major differences between them functionally. The Timbren system #TDR2500CA is a very solid jounce spring. It is a strong Aeon hollow rubber…

Thanks for providing pictures! The part you referenced, #SSC-22, will fit your 2006 Dodge Ram Pickup 2500 or 3500 but not a 1500. These are heavy-duty coil springs and will replace your OEM coil springs for better suspension support. Since you will…

In your case I really like the Timbren Rear Suspension Enhancement System part #T94VR these have the 8K capacity which will help to take a lot of the stress and strain off of that rear suspension set up. Towing 10-14k can cause wear issues relatively…

The Curt Trailer Hitch Receiver #14361 will install to the frame of your 2003 Dodge Ram 1500 as long as it was built after 11/01/02.

You would have to purchase the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black, #BWTS10037B as a complete hitch assembly to upgrade to the 2 inch and 2-5/16 inch ball. The different size ball…

While locking hitch pins aren't rated for capacity like a hitch, the strongest is the InfiniteRule hitch pin, which has a 42,000 lb shear strength. They are available for 2", 2-1/2" and 3" hitches: - 2" Hitch: InfiniteRule…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

The short answer to this question is- No. The B&W Hitch Receiver Reducer Sleeve #BWRHXA2182 does not reduce the tongue weight or towing capacity of your hitch in the same manner that a hitch adapter like the #HTAD would. You will still be able to…

As long as your 2003 Dodge Ram 1500 was built after November 1, 2002, you can use a trailer hitch from a 2010 Ram 2500. If your truck was built before November 1, 2002, you will need to install a trailer hitch that was designed specifically for that…

Since you have what sounds like a factory 4-way (or wiring) installed on your 2005 Dodge Ram you would not need to worry about circuits being installed or combined and needing the correct adapter. The harness you have for your 4-way wiring is already…