See what our Experts say about this TorkLift Battery Boxes

• Fitment of HQST LiFePO4 Batteries in TorkLift PowerArmor Locking Battery Box
  The outside dimensions of the TorkLift PowerArmor Locking Battery Box, # TLA7700L being 32L x 10.5W x 12.25D it appears that yes they will, per the battery dimension you specify. With 10.2" in height on the battery I would certainly isolate the terminals from box lid with non-conductive material and be aware of the envelope limitations when choosing connection terminals/hardware.
  view full answer...
• Is Exterior Width of Lid or Box For TorkLift PowerArmor Locking Battery Box TLA7700L
  Hi Mike; the exterior width of 10-1/2 inches includes the lid for the TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries # TLA7700L. It is 7-5/8 inches not including the lid.
  view full answer...
• Can a Solar Panel Be Added To The TorkLift PowerArmor Locking Battery Box # TLA7700L?
  The Solar Power Kit # TLA7713 will allow you to add to your TorkLift PowerArmor Locking Battery Box # TLA7700L. This will effectively give you the TorkLift PowerArmor Solar Locking Battery Box # TLA7700LS. If you are installing this panel on a battery box that contains only 1 battery, you will need a 8-amp regulator # TLA7715.
  view full answer...
• Weight Of The TorkLift PowerArmor Locking Battery Box # TLA7700L
  The TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries # TLA7700L weighs approximately 30lbs.
  view full answer...
• Torklift PowerArmor Battery Box # TLA7700L Base Dimensions
  The base of the Torklift PowerArmor Battery Box is 31-1/8 inches long and the width is 8-7/8 inches.
  view full answer...
• Can Torklift Battery Box Attach to L-Brackets on Trailer Frame
  The Torklift Battery Mounting Box part # TLA7708R or # TLA7700L that you referenced can mount to the brackets you have on your trailer as there are several holes on the bottom of the box that you can use to run bolts through to then attach to your bracket or you could drill new holes as needed.
  view full answer...
  
• Will Two Battle Born Batteries Fit In The TorkLift TLA7700L Battery Box
  The TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum # TLA7700L will have an internal dimension of 31-1/2" long x 10" wide x 11-3/4" tall. As long as 2 of the Battle Born batteries you are looking at does not exceed this dimensions, you will be good to go.
  view full answer...
• Width at Bottom of TorkLift PowerArmor Locking Battery Box TLA7700L
  You are correct that the 10 inch measurement is at the top with the lid on; the width at the bottom is 7-3/4 inches for the TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries # TLA7700L.
  view full answer...
• How to Install the TorkLift PowerArmor Locking Battery Box
  To install the TorkLift PowerArmor Locking Battery Box # TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are needed, or you can mount this in place of the OEM battery on the OEM battery brackets if that's what your trailer came with. Attached is a review video for you to check out. I'll also be sending the installation instructions to you in a separate...
  view full answer...
• What Does TorkLift PowerArmor Locking Battery Box # TLA7700L Weigh
  The TorkLift PowerArmor Locking Battery Box # TLA7700L that you referenced weighs 30 lbs.
  view full answer...
• Will TorkLift PowerArmor Lithium Battery Box Work with Other Types of Batteries
  I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box # TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size. Lithium batteries are typically a bit taller and more narrow so this box is designed to better support that size. The box features two sections inside the box to hold two batteries and each area measures 13-3/8 inches x 7-1/4 inches with a height/depth...
  view full answer...
• Installation Methods for TorkLift PowerArmor Locking Battery Box
  The holes on the bottom of the TorkLift PowerArmor Locking Battery Box # TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there are 4 recommended mounting methods for this battery box and you'll want to choose the one that best fits your trailer. You will want to drill pilot holes in both the box and the trailer frame in spots that line up however you're wanting to install...
  view full answer...
  
• How Can You Mount The Commercial Grade Battery Box To An A-Frame With Battery Rails?
  Great question, lets have a look at this unit and see what we can figure out. **Commercial Grade Battery Box for Group 8D Batteries - Vented # 329-HM484. *TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum # TLA7700L. The Commercial grade battery box is 24-7/16" long x 15-7/16" wide x 12-5/16" tall and its mounting base is 22-15/16" long x 13-11/16" wide with a mounting hole diameter of 5/16". We do not offer any kits to mount this unit to...
  view full answer...
• How Waterproof is TorkLift TLA7700L Battery Box
  According to the folks at TorkLift, the # TLA7700L battery box would be considered water resistant, not waterproof, as all batteries need to be able to vent. The don't offer a battery box that's 100% waterproof for that reason. My TorkLift rep tells me that they've received feedback from customers that have used self-stick weatherstripping on the lid of the box to help seal it which works well to keep water away from the wiring connections at the terminal. I've linked to a product description...
  view full answer...
• Will 2 Renogy Batteries Fit Inside the TorkLift PowerArmor Locking Battery Box
  Yes, the TorkLift PowerArmor Locking Battery Box # TLA7700L will comfortably fit your 2 Renogy batteries in it since each battery measures 13.1" Wide x 6.9" Deep x 8.6" High.
  view full answer...
• Battery Box That Can fit 4 100AH 12v GC2 Battle Born Lithium Batteries
  So the internal dimensions of the Torklift box part # TLA7700L that you referenced are 11-3/4 inches deep which is another way of saying tall. So since your battery is 11.02 inches tall this would easily be compatible. Since your width is 7.28 inches and this has an internal width of 7-5/8 inches this would fit in that regard as well. Where this wouldn't work is with the length dimension you mentioned of your batteries being 10.3 inches and fact you have 4 batteries. Instead we have the...
  view full answer...
• Are 'Lithium' Stickers on TorkLift Power Armor Locking Battery Boxes Easily Removable
  Torklift uses both stickers and thin aluminum plates with a sticker affixed to it. Either is fairly easily removed. The plates are a little harder to remove. I've had good luck removing that kind of thing by applying low heat from a heat gun or blow dryer to the label to soften the adhesive then using a piece of fishing line. Wrap both ends of a length of line around your index fingers and work the line under an edge of the plate. Use a back and forth sawing motion, and the line will work...
  view full answer...
• Can TorkLift PowerArmor Locking Battery Box TLA7700L Hold Group 27 Batteries
  Yes, even though the title says "Lithium Batteries", Group 27 batteries will fit in the TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries # TLA7700L. It says lithium batteries because this is a locking box and lithium batteries generally have the heftiest price tag, and are also a bit larger. However, your SRM-27 batteries are, according to my research, 12-3/4" long, 9" tall and 6-7/8" wide so they will easily fit right in the PowerArmor # TLA7700L.
  view full answer...
• Recommended Battery Box for 2 Batteries
  I may have a solution for you, but I'm not aware of any in floor mounted double battery boxes that aren't custom fabricated for the trailer. However, you might be able to make the TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum # TLA7700L work for your application. This is a locking battery box that can hold up to 2 batteries and you could potentially figure out a way to mount it in the floor of your trailer if needed with some fabrication. I've...
  view full answer...
• Is There a Battery Box Available that will fit 2 Batteries Measuring 13.7"x6.1"x10.6 Each
  I have a box that will fit your batteries but the TorkLift PowerArmor Locking Battery Box # TLA7700L has the overall dimension to fit your batteries but the problem arises on the construction of the inside and the length of your batteries. The # TLA7700L has some inside brackets that create 2 compartments for the batteries. Each compartment measures at 11-3/4" tall x 7-5/8" wide x 13-5/8" long. The issue is that 13-5/8" is only 13.6" which would be too short for your 13.7" batteries. The...
  view full answer...
• Can Torklift Lithium Battery Box # TLA7700L be Used on Non-Lithium Batteries
  Yes the Torklift Lithium Battery Box part # TLA7700L that you referenced can be used with non-Lithium batteries like your 6 volt battery. The only thing that differentiates this from non-Lithium battery boxes is the size of the box since Lithium batteries are typically a little taller and narrower.
  view full answer...
• Will Two Battle Born Batteries Fit Inside the TorkLift PowerArmor Battery Box # TLA7700L
  The TorkLift PowerArmor Locking Battery Box for 6V and 12V Lithium Batteries #TLA7700L is designed for Lithium batteries. Lithium batteries are typically taller and more narrow so this battery box is designed to better support that size. The box features two sections inside the box to hold two batteries and each area measures 13-3/8 inches x 7-1/4 inches with a height/depth of 10 inches. I looked up the Battle Born Lithium batteries and the largest size battery was 12-3/4 inches x 6-7/8...
  view full answer...
• Replacement Carrier for Kwikee Tray for 2 Batteries
  If you're looking for a replacement Kwikee tray then I recommend the Kwikee RV Battery Tray - 25-1/8" Long x 24-1/2" Wide # LC366331 which should allow you to place the batteries side by side. If instead you're just looking for a battery box then I recommend checking out the TorkLift PowerArmor Locking Battery Box # TLA7700L which measures 13-3/8" x 7-1/4" with a height/depth of 10" for each battery section.
  view full answer...
• Will the TorkLift PowerArmor Locking Battery Box Hold 2 GC2 Batteries
  The TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum # TLA7700L has inside dimensions of 31-1/2" long x 10" wide x 11-3/4" tall so your GC2 batteries that are 10 1/4" Long X 7 1/8" Wide X 10 7/8" tall will fit just fine inside there even with with divider.
  view full answer...