bing tracking image
  1. Camper Jacks
  2. Stromberg Carlson
  3. A-Frame Jack
  4. Leveling Jacks
  5. Tongue Jack
  6. Pop Up Camper
  7. Teardrop Camper
  8. Travel Trailer
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
Stromberg Carlson

Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black

Part Number: SC63VR
$241.27
Retail:$284.01
You Save: $42.74
Camper Jacks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night. 1-800-940-8924 to order Stromberg Carlson camper jacks part number SC63VR or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (113)
  • Q & A (0)
  • Photos
  • Used (1)

Stromberg Carlson Camper Jacks - SC63VR

  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jack
  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • Electric Jack
  • 4001 - 5000 lbs
  • Bolt-On
  • 1 Jack
  • 23 Inch Lift
  • Stromberg Carlson
  • Steel

Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.


Features:

  • Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
  • Top-mounted toggle switches are easily accessible
  • Large LED side lights make it simple to set up your camper at night
    • Also ease weight distribution hookup and disconnect
  • Bubble level on top of housing helps you level your trailer
    • Bull's-eye design shows front to back and side to side
  • Drop leg allows for greater adjustability
  • Rust-resistant powder coated steel parts are strong and durable
  • Housing is made of vacuum-formed plastic for protection from the elements
    • Black cover is painted to resist fading
  • Round, zinc-plated steel footplate provides stability
  • Emergency crank (included) allows you to manually operate jack if needed
  • Easy bolt-on installation for A-frame trailers
    • 3 Star washers included for making a good ground from jack to trailer
    • Mounting hardware sold separately


Specs:

  • Total lift: 23"
    • Screw travel: 18"
    • Drop leg: 5"
  • Lift capacity: 4,500 lbs
  • 2-Year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



JET-4500 Stromberg Carlson Electric A-Frame Trailer Jack - Black - 23" Lift - 4,500 Pounds

Installation Details SC63VR Installation instructions



Customer Satisfaction Score:


Customer Reviews

Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black - SC63VR

Average Customer Rating:  4.6 out of 5 stars   (113 Customer Reviews)

Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.

by:

This was a great replacement for our 4 year old Keystone Springdale trailer jack that bit the dust. Installation was easy and is much faster and quieter than our RAM jack that came with the trailer. I did sand down the paint on the contact points to make sure of a good ground then painted over what was exposed. I liked it so much I'll be looking at getting one for my large utility trailer.

Robert H. profile picture

Robert H.

5/3/2024

Still working great after a year of use



by:

The machine is great. The auto up and down make life easy I had trouble with my first one I bought. One of the wires on the controller was loose. It was promptly replaced and the other one has given me no trouble at all.



by:

Replaced the old worn out jack on my camper with this guy. It bolted right in and is so much quieter. My tailgate did hit this when first installed but I disassembled the cover and rotated the motor/head assembly 180degrees. This makes one LED point the wrong way but worth it to open the tailgate. Be warned though, I needed an extra set of hands to get it all back together.



by:

It arrived quickly and I installed it the same day. Installation was simple and straight forward. It works great. I highly recommend. I installed this jack on a Lance 1575 travel trailer. So glad I finally did this!



by:

So far not satisfied with this jack. It was easy enough to install BUT the up down switch is reversed so up is down and down is up. The motor will make 1 lift and shut off for 10 sec. or so. defantley not worth this kind of money

Jenny N. profile picture
Etrailer Expert

Jenny N.

10/16/2023

It does sound like this jack may need replacing. I will have our Customer Service team reach out to you to assist.



by:

Shipping was exceptionally fast, the jack works great, although I can for see the rubber on the toggle switches will probably either wear quickly or possibly the weather/sun will deteriorate sooner than later.



by:

we ordered the jack .It shipped quickly. easy installation no problems works great.



by:

Great product, should include wiring in structions.



by:

Works excellent! Highly recommended!



by:

The Strindberg jack works like a charm. I especially like that it automatically shuts off before it runs out of jack room on the shaft, both up or down. Really great product.



by:

This jack did not work right out of the box. It would retract but would not extend. Not only that, but when I tried to use the manual jack handle the unit would not work either. I had to use a bottle jack to get the trailer off my truck. etrailer was extremely helpful and helped me choose a different unit. They promptly sent to me the return shipping label for this defective unit.



by:

Jack installation was quick and easy. I have bought a lot of trailer equipment from Etrailer and they have been very good company to deal with.



by:

Thank you etrailer people for your fine service. I can not really rate this jack until I use it for at least a few months. But I can say that this electric jack works great just out of the box and it came with all the proper hardware for a good installation.

Randall profile picture

Randall

12/2/2022

Well a year later and all is well. We treat our jacks well and completely cover them in a plastic bag.The switches can be operated with the bag on.



by:

The jack is great. Works perfectly.
Not
too happy with whatever delivery service was used. Left this leaning against my mailbox at the edge of the street…
But it came quickly and wasn’t stolen.



by:

Very nice unit so far and simple installation. Since this is on an enclosed utility trailer that I work from on site, I am disappointed that I cannot completely open the tailgate as it rests on the jack's motor housing. I thought about rotating the jack but would have to drill new mounting holes and am not sure if the performance of the jack would be compromised as a result.

Jenny N. profile picture
Etrailer Expert

Jenny N.

3/24/2022

You mentioned that you wanted to rotate the jack and would need to drill new mounting holes. As long as you are drilling new holes into the trailer frame and not the jack there should not be any reason that the jack would not work for you.



by:

Great jack for the money!



by:

The new SC jack shipped quickly. Easy to install on my 20 ft. power tilt car carrier because I was only replacing a cheap electric jack from [online vendor] that had just failed rather than a new install.
I did have to turn the star washers over because the pointy side has to scratch through the paint to make a good ground contact but everything else was easy-peasy. You can tell that this new jack is a much more quality product. Works great/ much quieter than the old power jack. Thanks etrailer!!



by:

Very easy to install. Much more sturdier then the previous one.



by:

Installed easily with the parts provided. Works smoothly and quietly.



by:

The jack is in a slow failure mode. There seems to be some resistance in the jack as it keeps getting slower and slower at one year old. I’m waiting for the day it completely stops working. Voltage and ground are normal.

Katrina B. profile picture
Etrailer Expert

Katrina B.

6/29/2023

I have gotten in contact with the manufacturer. We are needing some more information in order to assist you better. Do you have a 30 Amp Fuse attached correctly? Make sure it is not loose or anything. Also please check to make sure that you have at least 12 volts coming to the jack. If it is less then 6, you will need to recharge the battery or change it. Also please look at all the wires inside the head of the jack to make sure nothing has come loose. One thing it could be, is if the jack was not hooked up as the instructions state, then it could be an issue with something in the RV. This is not a normal thing to happen with a jack that is one year old.



by:

I just installed the jack and haven't had chance to use it yet
I will know more next week when i return from camping to let you know how it performs
As far as delivery I am well satisfied with the amount of time in which I received it
Thank You



by:

Has been a great upgrade to my camper. Works amazing for even lifting the camper and the rear of the truck when putting on my stabilizer/sway bars. Thing is an OX!



by:

Installed the trailer jack this weekend, the install was very easy and took about and hour to complete. All equipment needed to install was supplied and a few hand tools. We will be taking the trailer out in a few weeks to see how it handles its first trip.



by:

etrailer helped me with no questions asked when a product came damaged by UPS. Got me a replacement before I could even box up the broken one to ship back.



by:

Sent an open package we should have refused!! It turned out to be defective. Took my time to install for nothing!!! Thank God Stromberg is sending a replacement. Leaves a bad tast to ever order from etrailer again. They dumped a unit on us that should have been tested first!


25
113
Show More Reviews

See what our Experts say about this Stromberg Carlson Camper Jacks

  • Replacement Electric A-Frame Jack with Protection from Over-Extension
    We do offer better jacks that have built-in protection from over-extension. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will find that the jack motor runs quick and effortlessly. This will add years to its life. This jack also has a unique clutch that prevents damage from overextending or retracting...
    view full answer...
  • Powered A-Frame Trailer Jack for 2010 Dutchman Sport 26B-DSL
    The Lippert Components # LC285318 uses a standard 3 inch on center bolt pattern. If the hole in your A-frame will accommodate those dimensions, and the tongue weight of your trailer is not greater than its 3,500 lb capacity, the # LC285318 will work for you. I have found that when it comes to powered jacks, overkill is a good thing. Getting the highest rated jack possible will result in quicker operation and longer life. I really like the Stromberg Carlson # SC63VR tongue jack as it is...
    view full answer...
  • Is There A Trailer Jack For A 2021 Coachman Spirit XTR Available That Has An Auto Stop Feature?
    I took a look at the Stromberg Carlson Electric Trailer Jack # SC63VR and the Bulldog Powered Drive Trailer Jack # BD500199 I believe I have found a comparable solution. I know this is not exactly what you're looking for, however none of our A-frame jacks have an auto-stop function like you're looking for, but I did find the: - Phoenix Electric Trailer Jack with Remote # UF38-944055. This jack has a maximum weight capacity of 5,500lbs, 26" of travel, and will extend 6" with a 1,000lb...
    view full answer...
  • What is Silver Lever on Bottom of Motor of Stromberg Carlson Jack SC63VR
    On the bottom of the motor of the Stromberg Jack part # SC63VR there is a release lever setup that gets inserted when you want to manually crank the jack to release it basically from the motor.
    view full answer...
    Image 1 for
  • Electric Trailer Jack Extends Fine But Does not Easily Retract
    If it runs when you push the retract switch then it likely is not the switch though it would not hurt to clean the contacts on the inside. It sounds like the jack has been over extended at some point which can damage the threads on the nut and/or screw on the inside. Try raising the jack about half way and then retracting it. If it works fine then that is probably the issue. If the jack continues to have problems then there may be a problem with the motor/gears. Either way, damaged threads,...
    view full answer...
  • Can a Single Stabilizer Jack # LC298707 Be Installed on Coleman Clipper and See Benefits
    With just a single one of the Lippert Components High-Speed Power Stabilizer Jacks # LC298707 installed on your trailer you'll get a lot of benefit. You'll be able to level and stabilize the jack and can use your crank jack out on the front of the trailer to help as well. My favorite powered jack to recommend is the Stromberg Carlson # SC63VR, as it shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage...
    view full answer...
  • Dimensions Of Stromberg Carlson Electric Trailer Jack SC63VR
    Absolutely! From the top of the Stromberg Carlson Electric Trailer Jack # SC63VR to the mounting flange is 21-1/4" and from the front of the jack to the tube is 5-5/8" as shown in the included diagram. I included a video of the # SC63VR for you to take a look at.
    view full answer...
    Image 1 for Image 2 for
  • Tailgate Clearance for the Stromberg Carlson Electric Trailer Jack
    I would be happy to help you. Based on the information you have given me I am going to give you the height of the Stromberg Carlson Electric Trailer Jack Item # SC63VR you referenced. This jack sits 21 1/4" above your trailer's frame. You will just need to hook your trailer up or raise it to where you would have it when your tailgate is down. If this jack doesn't work go ahead and send me an email with the height you are looking for and I will try to find you a jack that will work or we...
    view full answer...
    Image 1 for
  • Husky Brute Powered Jack Recommendation
    There isn't a motor available for the Pro Series Square Jack # PS1400850383, but what you might be interested in would be a powered jack like the Stromberg Carlson # SC63VR electric tongue jack. This is an A-frame jack with a 4,500 lb capacity that would work well as long as you have an A-frame jack and a tongue weight less than 4,500 lbs. It also has a clutch that prevents damage from over extending or retracting it. Additionally, a resetable breaker should the jack draw too much amperage.
    view full answer...
  • What is Purpose of Small Metal Tube that Comes with Stromberg Carlson Electric Trailer Jack # SC63VR
    That small metal tube you mentioned is the clutch release for the motor of the Stromberg Carlson Electric Trailer Jack # SC63VR. If you were to need to manually raise or lower the jack you'd insert that metal piece into the side of the motor to release the jack clutch so that it can actually be manually raised or lowered.
    view full answer...
    Image 1 for
  • Does Stromberg Carlson A-Frame Trailer Jack SC63VR Use Ball Screw Mechanism
    It sure does! I checked with the manufacturer, Stromberg Carlson, for you and they verified for me that a ball screw mechanism is indeed used on the 4,500 lb A-Frame jack you asked about, which is the following part number: - Stromberg Carlson Electric Trailer Jack # SC63VR That was a good question because a jack with a ball screw mechanism is definitely the best option as they are the most efficient, durable type of trailer jack.
    view full answer...
  • Recommended Replacement Tongue Jack for a 2007 Keystone Montana Mountaineer 31RLD
    If you are looking for an upgrade, I recommend going with an electric jack like the Stromberg Carlson Electric Trailer Jack - Drop Leg # SC63VR. I know the price tag is a bit intimidating but I think if you're using your jack and trailer enough, the amount of time saved from winding up and down is well worth it. This jack has a 23" lift height, a 4,500-lbs capacity, and features a super easy, bolt-on installation. Or If you'd prefer to stick with a manual jack, then the Pro Series Square...
    view full answer...
  • Best Replacement for the Lippert Smart Jack Electric Trailer Jack
    The Lippert Smart Jack Electric Trailer Jack part # LC643589 is a good innovative option with memory features but it does have a design flaw in my opinion. The touchpad or controls are on the top of the jack. The reason that this is a problem is because the seals around the controls break down over time and water gets inside ruining the jack. This could be attributed to rough use, bad seals, but the touchpad being directly on the top of the jack means water can come straight in as opposed...
    view full answer...
  • Powred Jack Recommendation to Replace Non-Powered Jack
    You are going to have to remove your current A-frame jack and replace it with one that does have a motor as there isn't a way to add motors to jacks that don't currently have them. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will find that the jack motor runs quick and effortlessly. This will add years...
    view full answer...
  • Trailer Jack Recommendation that Doesnt Break When Over Retracted or Extended
    The circuit breaker of the Ultra-Fab Electric A-Frame Jack # UF38-944017 is designed to prevent the motor from drawing too much amperage and damaging itself. If you were to lower the jack all the way and then keep holding the button you eventually would trip the breaker, but more importantly you would potentially damage the threads of the internal screw of the jack which would permanently break it. I would not advise you rely on the breaker to or the threads bottoming out to let you know...
    view full answer...
  • Recommended Electric Trailer Jack for an A-Frame Trailer With 700 lb Tongue Weight
    I recommend using the etrailer.com Electric Jack with a Footplate, part # EJ-3520-BBX, for A-Frames. This trailer jack is rated for 3,500 lbs so it will have more than enough power to lift and lower your tongue weight of 700 lbs. This trailer jack has a total lift of 25-1/8 inches and comes with an LED light that shines down towards the coupler to make connecting or disconnecting your trailer in the dark much easier. Another great feature about this electric trailer jack is that it has...
    view full answer...
  • Is a Bulldog A-Frame Electric Trailer Jack a Good Replacement for an LCI Jack
    The Bulldog A-frame trailer jack # BD500199 is an excellent choice. I don't see any reason why you would have to rotate it 90 degrees for installation so no worries there. The easiest way to get more clearance between the tow vehicle and trailer is to just use a longer ball mount than what you have now. If interested I have linked the fixed ball mount main page for you. The Husky Brute HT87247 was a good jack but is now discontinued. I would now recommend the Stromberg Carlson # SC63VR...
    view full answer...
  • What Is The Mounting Bolt Pattern Of The Stromberg Carlson Electric Trailer Jack SC63VR?
    The Stromberg Carlson Electric Trailer Jack # SC63VR you were looking at has mounting holes that are 3" apart on center. This is the standard mounting hole pattern used by virtually all a-frame trailer jacks, so it will be an exact replacement for your current manual a-frame jack. I included a video of the # SC63VR for you to take a look at.
    view full answer...
  • What is the Warranty of the Stromberg Carlson Electric Trailer Jack # SC63VR
    The Stromberg Carlson Electric Trailer Jack # SC63VR has a 2-year warranty. This jack has a 4,500 lb weight capacity and is a sturdy steel jack. It has a built-in clutch to protect the gears and the motor. If you have already wore out 2 jacks then I would make sure that the next one you purchase is rated for a higher weight rating. The 4,500 lb weight capacity of this jack should be good because it is one of the highest out there but if your other jacks were close to or at this rating...
    view full answer...
  • How Does Trailer Jack with Single Wire Wire to Trailer Wiring
    The Husky jack you mentioned is no longer available which why the install video is not where you are looking but for a similar jack we have the Stromberg Carlson part # SC63VR which has a 4,500 lb capacity and installs in the same way with a single wire. I attached a review video for more info on it for you to check out as well. If you were to wire it to a 7-way you'd have to wire it to the 12 volt accessory circuit which is the pin in the 1:00 position. Most of the time these are wired...
    view full answer...
  • Powered Jack Recommendation to Replace 3,500 Power Jack that Strains
    For your style of A-frame trailer and it's loaded weight the best option is a higher capacity powered a-frame jack like the Stromberg Carlson # SC63VR which has a 4,500 lb lifting capacity which would be more than needed since your trailer that weighs right at 10k would have a tongue weight around 1,000 lbs. This is a favorite jack as it shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads...
    view full answer...
    Image 1 for Image 2 for
  • A-Frame Electric Power Jack Recommendation For Trailer
    We've got several electric A-Frame jacks that would work perfectly for you. If your trailer weighs just shy of 10,000 lbs, the trailer's tongue weight is likely somewhere in the neighborhood of 1000-1500 lbs, so you'll want a jack with a capacity greater than that. The greater the capacity of the jack, the less hard it'll have to work and therefore the longer it will last. Because of this, I'd recommend going with the highest capacity jack your budget will allow. My go-to recommendation...
    view full answer...
  • Powered A-Frame Jack Recommendation for R-Pod Trailer for Installing Weight Distribution
    For your trailer all of our powered A-frame jacks would fit and work well. I really like the Stromberg Carlson Electric Trailer jacks like part # JET-5000 or # SC63VR. I would recommend the # JET-5000 because it has a 5000 pound capacity which wouldn't have to work as hard, would be faster, and would last longer as a result.
    view full answer...
  • Recommended Electric Trailer Jack For 7000lb Pace American Trailer
    I have an option that may work for you, but the Model L812TA2 you mentioned did not cross reference with any parts. I recommend going with the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black # SC63VR which will install into the a-frame of your trailer and its 4500lb capacity will make raising and lowering the tongue of your trailer quick, and will keep the jack working great for years to come. I included a video of the # SC63VR for you to take...
    view full answer...


< Previous
123. . .5



Do you have a question about this Camper Jack?


Used Items Available
Used Picture for Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
Used Picture for Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black

Condition: Badly Dinged

Notes: crack on head unit

$130.13
Add to Cart
Secure Checkout

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Mike S
Written by:
Mike S
Employee Adam E
Installed by:
Adam E
Employee John S
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.