See what our Experts say about this etrailer Trailer Tongue Lock

• Can Multiple Sets Of The Bulldog Locks BD580404 Be Keyed Alike?
  Hi Rob! The Bulldog Lifelong Trigger-Style Coupler Lock and 2" Trailer Hitch Receiver Lock - Chrome # BD580404 cannot have multiple set be keyed alike, unfortunately. If you are open to a different option though, the Trimax 2" Hitch Receiver Lock and Trigger-Style Coupler Latch Lock Set # TMX93SR can have as many sets as you want keyed alike. It is a different style than the Bulldog, but I think the barrel style keys the Trimax has are easier to use. Guessing you have multiple trailers...
  view full answer...
• Recommended Hitch Lock And Coupler Lock That Can Be Keyed Alike
  We have exactly what you are looking for. I recommend the etrailer Hitch Receiver and Coupler Lock Set # e99039 which includes a 5/8" diameter lock for a 2" trailer hitch receiver, and a 1/4" diameter lock for the trailer coupler. You can get two of these sets keyed alike by selecting keyed alike from the drop down menu on the product page, and changing the quantity to 2. I included a video of the etrailer # e99039 for you to take a look at.
  view full answer...
• Availability Of a Keyed Alike Hitch and Coupler Lock With a Coupler Latch Lock Wider than 1/2"
  You are going to want the Master Lock Hitch Receiver and Coupler Latch Lock Set # 1481DAT as it has an adjustable coupler lock which fits multiple coupler latch sizes. This like the etrailer Hitch Receiver and Coupler Lock Set # e99039 you found will fit a 2" wide class IV receiver with 5/8" diameter pin. We do also have the etrailer Hitch and Coupler Lock Set # e68ZR which will also include a storage lock to keep your trailer safe when not connected. And finally we have the larger 2-1/2"...
  view full answer...
• Lock Kit Part Number From etrailer Towing Accessories Kit
  To get just the locks out of the etrailer Towing Accessories Kit # e99039-9 you just need the part # e99039. This includes both of the locks from the kit but nothing else.
  view full answer...
• Trailer Hitch with Best Ground Clearance for 2008 Honda Element EX AWD
  All of the trailer hitches available for your 2008 Honda EX are going to have pretty similar ground clearance measurements but your best option will be with the etrailer # e78KR. The 2 inch receiver on this hitch will pretty much sit right up against the bottom of the rear bumper on your Element (see attached image). This Class III hitch will require drilling for installation and it has a 3,500 pound towing weight capacity and a 350 pound tongue weight limit. I have attached an install...
  view full answer...
  
• Can a High/Low Adapter be Used with a Hitch Extender for Flat Towing
  I do have a solution for you, but using an extender with a high-low adapter would be using 2 adapters and is not advisable. Hitch extenders reduce the weight rating of your hitch by 50% and will also cause more movement not to mention the torque that will be on both adapters when you are making a turn. Instead what you can do is swap out your current hitch mount tow bar, like the Blue Ox Alpha # BX7380 for a coupler mount tow bar like the Blue Ox Acclaim # BX4330. This allows you to then...
  view full answer...
  
• Getting Keyed Alike Locksets for Hitch, Coupler and Cable Locks
  Yes, you can get all of the locks you have mentioned keyed alike as long as you order from our Keyed Alike locks page. If you order all the locks you need at the same time they will come keyed alike. If you decide you need another lock keyed the same later you can call our customer service line at 1-800-298-8924 and request a lock, as long as it is on our Keyed Alike locks page, with the same key by giving them the key number you have. When you order please be sure to select keyed alike...
  view full answer...
• Recommended Hitch Lock Set That Can Be Ordered Keyed Alike
  The Master Lock Hitch Receiver and Coupler Latch Lock Set # 2848DAT is not available keyed alike, but we do have a 2-lock option from etrailer that can be keyed alike in multiples, part # e99039. This lock kit consists of a 5/8-inch diameter hitch lock for 2 x 2-inch receivers and a 1/4-inch diameter coupler latch lock. You can order multiple sets of this lock kit that are keyed alike by selecting that option from the menu bar above the add-to-cart button. No individual replacement parts...
  view full answer...
• Recommended Weight Distribution System For Grand Design Imagine 2950RL Trailer
  For your 2016 Ford F-150, I recommend the Reese Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW # RP66074. This system has a total tongue weight range of 600-1200 lbs. The total tongue weight is the loaded tongue weight of your trailer along with any cargo behind the rear axle of your truck. The Reese Straight-Line uses hot rolled spring trunnion bars along with cams to keep your trailer straight. This is the only system that actually actively...
  view full answer...
• Trailer Hitch Size on a 2002 Chevy Silverado
  If you have the factory hitch installed on your vehicle, then it is the 2 inch by 2 inch receiver hitch. If it is an aftermarket hitch on your vehicle then it is most likely a 2 inch receiver hitch. You will need to measure the inside width of the opening on the hitch where the receiver slides in. The measurement should be apparent when you use a ruler or tape measure. Below, links are posted to our 1-1/4 and 2 inch hitch pins and instructions for measuring your hitch.
  view full answer...
• Keyed Alike DeadBolt Trailer Hitch Receiver & Coupler Lockset # 7685 Recommendation
  You would want to get a etrailer Trailer Hitch Receiver & Coupler Lockset # e99039. You can select keyed alike from the drop down menu on the product page and then enter the quantity you would like. At this time the time the Master Lock Hitch Receiver and Coupler Latch Lock Set # 1481DAT is not offered keyed alike.
  view full answer...
• How To Order a 2" Trailer Hitch Receiver Lock Keyed Alike With 2 Coupler Latch Locks
  Thank you Dean. While we currently only offer the Diversi-Tech Combination Lock Set # DT35010KA5504 as the set and do not have a keyed alike 2nd coupler latch we do offer our etrailer Hitch Receiver and Coupler Lock Set # e99039 which you can have keyed alike by selecting the option from the drop down on the item page. Then you can add the 2nd Coupler Latch # e98884 and also select keyed alike from the menu. This will give you the 3 locks all keyed alike.
  view full answer...
• Are There Keyed Alike Trailer Coupler Locking Pin Sets Available
  Hey Dave, We offer hitch pin and coupler latch pin kits with part # e99039 that you could have keyed alike but they don't come with the a lock for the coupler itself. We do offer the BOLT Locks brand which keys to your vehicle key so that you only have to carry one key. I would just need to know the year/make/model of your vehicle to determine which coupler lock # BL7032491, coupler latch lock # BL7025285, and hitch pin lock # BL7018447 you'll need.
  view full answer...
• Trailer Hitch and Bike Rack Recommendation for a 2006 BMW X5
  I recommend the Draw-Tite Trailer Hitch for the 2006 BMW X5, item # 75492, which has a 6,000 pound towing weight capacity and a 600 pound tongue weight capacity. The highest capacity hitch is always the way to go when possible, for safety and versatility for future needs. At first look the Curt Trailer Hitch for the 2006 BMW X5, item # C13162, seems to be an easier installation but if you review the instructions for each, I believe, you will see that the Draw-Tite model is just as easy...
  view full answer...
• Is Bumper Fascia Cutting Required for Installation of the Curt Hitch #13251On a Jeep Grand Cherokee
  If you are installing the Curt Class III Trailer Hitch, item # 13251, on a 2005 to 2010 Jeep Grand Cherokee (except SRT8), there will be no cutting of the fascia required to install the hitch. If your vehicle has any aftermarket parts, then that will need to be determined at the time of installation. Some items you may need with the Class III hitch are listed below. Drawbar # C45010 Hitch Ball # 19260 or # 19247 Hitch Lock Kit # e99039
  view full answer...
• Replacement Lock for Snowbear Trailer Coupler
  The Pin and Clip For Class 3, 4 and 5 Trailer Hitch Receivers, item # PC3, is the pin needed to install a ball mount in a Class 3 or larger 2 inch receiver. I checked out the Snowbear trailer website and saw that the majority of their trailers have a standard 2 inch ball coupler. We have coupler locks that will fit this style of trailer coupler. The Curt Coupler Safety Pin, 1/4 inch, item # K-8P, is a no frills safety pin that will get the job done and if you want a measure of security...
  view full answer...
• How To Order Stainless Steel Hitch Locks and Coupler Locks to be Keyed Alike
  For stainless steel coupler lock and hitch receiver lock that can be keyed alike, I would recommend the etrailer brand locks. They offer the etrailer Stainless Steel 2 Inch Hitch Receiver Lock, part # e98882, which will fit most 2 inch hitch receivers, and has an inside width of 2-5/8 inches. For coupler locks they offer the etrailer Stainless Steel 7/8 Inch Span Coupler Lock, part # e98890, which has an inside width of 7/8-inch, and the etrailer Stainless Steel 1/2 Inch Span Coupler...
  view full answer...
• Recommended Trailer Hitch Receiver and Weight Distribution System for 2005 Safari Trek and Trailer
  For your 2005 Safari Trek motorhome, I recommend the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 which can be welded or bolted to the frame of your motorhome. This has a 5,000 lb capacity without weight distribution or 6,000 lbs with weight distribution...which would be required in your case. Based on the trailer and vehicle weights you gave, I recommend the Strait-Line Weight Distribution System w Sway Control - Trunnion Bar - 12,000 lbs...
  view full answer...
• Recommended Class III Trailer Hitch Receiver For A 1999 Toyota RAV4
  For your 1999 Toyota RAV4, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13524 is a confirmed fit and is a great hitch that is easy to install and has a nice sturdy square tube design. The rated towing capacity of the hitch is far above your vehicle's rated towing capacity as you stated, but you will be much happier with a Class III hitch. The class 1 hitch will greatly reduce your ability to use accessories and will significantly reduce options for even a ball mount....
  view full answer...
• Hitch Lock Recommendation for 21-Foot Trailer Towed With Hayman Reese Hitch
  We offer a range of different trailer locks, from straight hitch pin types like the etrailer Lockset # e99039 that you referenced to coupler locks like the Fastway Universal Trailer Coupler Lock # FA86-0015-316 that fits 1-7/8-inch, 2-inch and 2-5/16-inch trailer couplers. Trailer weight does not matter when it comes to selecting a lock. What matters is that you choose one that is long enough for the width of your receiver opening. According to the Hayman Reese website their Class 3 RL...
  view full answer...
• Can a Bumper Mounted Trailer Hitch be Used to Tow a 5X8 Trailer with a 2005 Chevrolet Colorado
  As long as you stay within the manufacturers tongue weight and gross trailer weight ratings, see bumper and owners manual, you will not have a problem towing with the Curt 2 inch Bumper Hitch, 5,000 lbs GTW, item # E-3S. A better solution for your towing needs would be the Draw-Tite Class III Trailer Hitch, item # 75607, which is designed specifically for your 2005 Colorado. This is a no drill installation and all of the mounting hardware is included. Some items you may need to complete...
  view full answer...
• Coupler Lock, Pin Lock, and Hitch Pin Lock for Underslung Coupler
  We have a coupler lock that fits underslung couplers with the Atwood AMPlock part # AMP56FR but we don't have a matching kit that includes a hitch pin lock and coupler latch lock all with the same key. Then for a matching pin lock and hitch pin lock you could use the part # e99039.
  view full answer...
• Can the Master Lock Hitch Receiver and Coupler Latch Lock Set Be Keyed Alike?
  No, I am sorry Steve Master Lock does not offer their locks to be keyed alike. Instead of the Hitch Receiver and Coupler Latch Lock Set item # 2848DAT you were looking at, I recommend our 2-lock option that can be keyed alike item # e99039. This lock kit includes a 5/8" diameter hitch lock for 2" receivers and a 1/4" diameter coupler latch lock. When purchasing you'll want to go to the right hand side of the product page and select keyed alike above the add to cart button.
  view full answer...
• Can the TowSmart Trailer Coupler Lock Kit Be Keyed Alike
  I do have options for you but the TowSmart Trailer Coupler Lock Kit part # TS84FR does not have a keyed alike option. The etrailer Hitch Receiver and Coupler Lock Set part # e99039 is a similar kit minus the surround coupler lock which does have a keyed alike option. I have attached all our keyed alike options below as well.
  view full answer...

Do you have a question about this Trailer Tongue Lock?