Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Hitch fast shipping Not to bad to install with 1 person. Nice fit. Works great. Have used several times with bike rack
From the order receipt notice to the delivery...amazing! Impressed with the personal touch of the order processing and tracking. Thanks again for the thorough, high quality videos. The video omitted a step for my 2020 Lincoln Nautilus, but the paper instructions covered it (see photo). The plastic panel is attached to the bottom of the bumper and must be removed/discarded for the installation, and doesn't affect the appearance nor function of the vehicle. etrailer is a class act!
Excellent value for a great product! I love how it hides so well under the rear bumper/fascia. They include everything you need for a complete install. Fast shipping and great follow up. The website is so easy to navigate.
Great product and it was easy to install. Everything came with the kit and I didn’t need to buy anything extra. The utube channel had a video showing complete instructions
Installing was straightforward and it looks like it is an OEM part. Thanks etrailer
Bruce
11/13/2025
After more than a year, the hitch receiver looks new and works perfectly.
Watch the video that is provided from etrailer. If you do, you won’t have any issues. Took me about 2 hours (getting the bolts thru the frame was tricky, but it slid right into place. Solid build, sturdy, and great product!
Brooke M.
6/3/2025
Glad you were able to get it done, Kenny. Looks great! What will you be using it with?
Brooke M.
6/4/2025
This hitch works great. We bought it primarily to haul our bikes back and forth to Arizona. The fit on the SUV is perfect.
It is a very robust designed and manufactured hitch. Installation was very simple and the fish wire was just as simple as it shows on the instructional video. Overall very well pleased. The only problem I had was one of the hex nuts was so close to the gusset, I could not use a socket but had to use an open end wrench. The instructions do not state to not reinstall the heat shield but the video does. I used zip ties to secure the bumper cover to the hitch which worked perfectly.
Bobby D.
3/25/2024
Still love it. No issues or concerns
Hitch is perfect but the instructions are a little hard to understand.
This is my second hitch with yall and both installed successfully. Plus the price was right.
Freaking awesome trailer hitch! I've been an E-Trailer customer for years and this is the easiest install I've ever had. I love how the hitch is completely hidden except for the receiver! Also, having been an E-Trailer user for a while, this was the first hitch to arrive without any paint missing. I'm mildly optimistic that this matte finish is more durable than the usual gloss paint of other brands. I'm excited to see E-Trailer with private label hitches. Time will tell if this holds up but honestly, there's so little that shows it's going to be great! I bought a 60k mile 2019 Ford Edge Titanium and will likely have it for another 100k based on past ownership. I'm confident this hitch will serve perfectly through that lifespan. Keep up the great work E-Trailer folks!
Very easy to install using the available vehicle specific video. Have had no issues whatsoever. Highly recommend this hitch!
I installed it with no issues well designed and instructions are clear E trailer never lets me down !
The hitch hangs down too low. The hitch assy should be positioned 1" higher and the safety chain (hooks) should be welded horizontal not vertical. You would gain about 3" of clearance.
Excellent fit, A few tips if working alone. (My car a 2020 Edge) WD40 the rubber muffler hangers first, use a tie down strap or rope under the big muffler, strap or rope (3 -4 inches below current position., YOU DO NOT have to remove bumper cover, Save the dirt /heat shield that attaches to bottom of bumper cover, ( you will need to cut out the area were now the drop down part of the receiver sets. Cut shield in half, also trim off both ends were one nut held on with the inner fender well Pic H3 This will cure the floppy issue one guy had with the bottom of bumper cover. I had tin snips but a hacksaw will work.
Do cut off the center stud above muffler, that the heat shield mounted too. I placed the right side of hitch on top of the tailpipe/ muffler. put drivers side on a spare jack stand about 4 in down from frame. feed through the clever feed wires on bolts, left the top 2 horizontal ones in frame , attached lower 2 first, be sure to keep one finger on that bolt when you screw off the guide wire. Repeat on drivers side done in a couple hours. Used the premade harness got from etrailer, and it made for fast work in getting light wires attached. First 2 pics looks like a factory install. Thanks' etrailer for your quality products.
Scottb
10/6/2023
Actually my 2nd hitch for an Edge., first hitch for 2020 Edge covid yr made car had a complete wiring harness failure so I trade up to a 2022 Edge, Installed another hitch same PN on the 2022 Edge, easy to install, looks awesome and has worked perfectly. Still looks brand new with that premium coating used on it.
Mike L.
10/21/2023
Exact fit. Hitch works great. The install video on the website was super helpful and very accurate. Well done etrailer!
Works great with our eBike trailer. Had this one installed and they had no issues.
Sturdy and easy to use. Hauling e-bikes on a rack with my Ford Edge. Works great! Low profile receiver does not detract from good looks of my car!
Bought the hitch so we could use our bike rack, and it has been an excellent addition to our 2021 Ford Edge. I actually had a high school auto shop class do the installation for me, and they did an excellent job. The hitch is barely visible at the back of the vehicle, but works perfectly for our purposes with hauling bikes!
I haven't installed it yet I have bought hitches and light kits from this company before, and have always been happy with all their products and their super fast shipping.
David
1/6/2025
Great and easy to install
Solid hitch, install went good- 2018 MKX. Modified the backside bumper panel to fit it back in easy enough. Didn't love the safety chain hookup tabs, they hang a bit low but all the other hitches out there were the same. Went with the etrailer one from past experience in quality and price. Found the safety chains had to be shortened so they didn't hit the ground and even then were too close for my comfort. Ended up cutting the tabs off and welding on loops that went out the sides instead of down and placed them back further from the hitch to resolve that issue. Wish there was an aftermarket one that mounted more like the OEM- would look and work better but a cost vs value deal- OEM was 6x more expensive!
Nice heavy duty hitch. Installation longer than expected. Wish chain loops didn’t hang so low. Easy to scrape
User friendly website, quality product as advertised. A 2” receiver and concealed drawbar as I requested. A reasonable price offered. For my purposes, this should be adequate to carry my two EBikes to and from various locations.
Will was helpful during the transaction.
Excellent quality. fantastic shipping. super easy and smooth install!!!!
Excellent hitch.
Wiring kit worked p erfectly.
Installation video on the website was extremely helpful! I had not problems installing the receiver on my 2021 Edge.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mikes E.
10/2/2025
No complaints. Has worked out good.