See what our Experts say about this Redline Trailer Door Parts

• Replacement for 84 Inch Bumper on Horse Trailer
  All of our bumper strips are 96" long and have the holes pre-drilled out at 11" on center, but the nice thing is these can be cut and re-drilled to accommodate your application. You just need to choose which one has the width you're looking for: 2-1/16" Width - # D2-96 3" Width - # D3-96 4" Width - # D4-96 So these will definitely work, you'll just need to do some modification to make it work.
  view full answer...
• Will Round Rubber Trailer Bumper Fit Trailer With 12 Inches Between Mounting Holes
  I can understand not wanting to drill holes in the bumper, but the Pre-Drilled Round Rubber Trailer Bumper - 96" Long x 2-1/16" Wide # D4-96 measures 11 inches on center between the bolt holes, there isn't anything that can be done that wouldn't require you to drill new holes in this bumper to match your 12 inch on center measurement.
  view full answer...
  
• Rubber Bumper for Stock Trailer
  We do have some rubber bumpers for you to install on your stock trailer. They are all 96" long so it just depends on what kind of width you're looking for: 96" Long x 2-1/16" Wide - # D2-96 96" Long x 3" Wide - # D3-96 96" Long x 4" Wide - # D4-96 These come pre-dilled with holes every 11" but you can cut these to length and drill new holes to match your application if you need to. Attached is a review video for you to check out.
  view full answer...
• Rubber Bumpers for Trailer Ramp
  We have a 1 inch bumper # 386000 and a 2-1/2 inch # 37210715. We also have bumper strips, like # D4-96 if you'd prefer that style.
  view full answer...
• Is Rubber Bumper D4-96 a Round or Square Style of Bumper
  What you see in the attached picture is what you'd get if you ordered the Pre-Drilled Rubber Bumper part # D4-96 that you referenced. It has an odd shape that doesn't completely match the description of round or square, but the picture shows what it actually is.
  view full answer...
  
• Rubber Bumper Options for Rear of Horse Trailer
  We have 3 different rubber bumpers that you can use for your horse trailer. They all measure 96" long but have different widths so you'll just need to choose the appropriate width: 2-1/16" Width - # D2-96 3" Width - # D3-96 4" Width - # D4-96 These can be cut to length and modified as needed. There are holes every 11" but if you need mounting locations different than that you can drill out holes to fit your application. Attached is a review video for you to check out.
  view full answer...
• Can Custom Holes be Drilled Into a Redline Pre-Drilled Round Rubber Bumper
  Since the Redline Pre-Drilled Round Bumpers, part # D3-96, part # D2-96, and part # D4-96, are made of rubber I see no reason why you cannot drill out mounting holes so that they are custom to your hole patterns. If you will be using the full 96 inches of the bumpers then you may want to consider drilling more mounting holes in your trailer so that the bumper has more support. I recommend drilling out holes to match the rest of the pre-drilled holes to avoid more drilling. Keep in mind...
  view full answer...
• Can Pre-Drilled Round Rubber Trailer Bumper # D4-96 be Installed Directly on a Trailer
  Yes. I don't see any reason why you couldn't use Pre-Drilled Round Rubber Trailer Bumper # D4-96 on your trailer. Assuming that the length at 96 inches and the height at 4 inches will work with the available space you have of course.
  view full answer...
  
• Option For Rubber Bumper For Rear of Trailer
  Hi Larry, So we have a couple bumpers that may work, though each is 96 inches long. They can be cut to length though, and the difference is their width, as one is 3" wide and the other 4" wide to fit different size bumpers: - Pre-Drilled Round Rubber Trailer Bumper - 96" Long x 3" Wide # D3-96 - Pre-Drilled Round Rubber Trailer Bumper - 96" Long x 4" Wide # D4-96
  view full answer...
• Separating Brake and Turn Signals, Adding a Reverse Light, and Ramp Door Support for a Trailer
  First, trailers in the US use what is called a combined 2-wire system. The brake lights and turn signals are on the same circuit on each side. The turn signal overrides the brake light on the side blinking. In order to have separate turn signals you would need additional amber turn signals and you would need to do some rewiring. On the trailer side you would need to install a special converter, # 118158. The combined left turn/brake wire connects to the yellow input wire, right turn and...
  view full answer...
• Recommended Trailer Bumper Replacement
  We only sell trailer bumpers in 96 inch lengths, but they can be cut to size. We have a 4 inch option # D4-96, a 2-1/16 inch option # D2-96, and a 3 inch option # D3-96. The holes are 11 inches apart and have a 1-1/4 inch diameter
  view full answer...
• Installation of Redline Pre-Drilled Round Rubber Trailer Bumper
  The Rubber Trailer Bumper, # D4-96 comes from the manufacturer with recommended guidelines for best fitment their product. If you choose to alter the installation from recommended that is your choice, but it may not hold up the way it was designed with the improper hardware.
  view full answer...
• Can a 4 Inch Bumper Strip be Used in Place of One that Sticks Out 3 Inches
  The Pre-drilled round rubber bumper # D4-96 is going to stick out a little further than the old bumper you have but it will still work. The length would have to be trimmed down since the new one is 96 inches. The mounting holes are spaced 11 inches apart on center on the new one as well so it will work on your trailer.
  view full answer...
• Can Redline D4-96 Rubber Trailer Bumper Be Trimmed to Size and Drilled
  The Redline # D4-96 Round Rubber Trailer bumper can certainly be cut to size and have holes drilled in it so you can attach it any way you wish.
  view full answer...
• Will Pre-Drilled Round Rubber Bumpers D4-96 Replace Bumper with More Holes
  If the distance you have between the mounting holes on your horse trailer bumper is 11 inches the part # D4-96 is going to match up and work well. If it has more mounting holes that wouldn't necessarily be a bad thing. It would just overhang a bit. Or you could trim it down.
  view full answer...
• Replacement Trim For A Shoop Horse Trailer
  Hey Nicolette, You can send me those pictures and I can take a look at our inventory to see if we have a match.
  view full answer...

Do you have a question about this Trailer Door Part?