See what our Experts say about this Camco RV Vents and Fans

• Replacement Roof Vent Cover Needed for a 2019 Coachmen Class C Motorhome
  We do have quite a few replacement options for the vent cover on your 2019 Coachmen Class C motorhome. Even though you measured 13" x 13" you will be looking for a 14" x 14" replacement vent cover. To obtain a correct vent cover replacement you simply need to choose what kind of hinge your current vent cover uses. We have covers with a continuous hinge like part # BV0554-01, a 3-point hinge like part # CAM40153, or a 4-point hinge like part # CAM40154. If you are unsure as to what hinge...
  view full answer...
  
• Replacement Vent Covers for a 1969 Wilderness Camper Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
  
• How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
  In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
  view full answer...
  
• Replacement Vent Cover Recommendation for a Rockwood Signature Travel Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Picking Out Replacement Roof Vent Cover for 2010 Arctic Fox B1150
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
  
• Replacement Vent for a 1975 Wilderness Camper Trailer
  We do have replacement vents and vent covers that you can choose from. It is most likely a 14 x 14 vent as that is the most common, but you will want to measure yours just to make sure. A great 14 x 14 option that looks clean and is functional is the Ventline Ventadome Trailer Roof Vent # V2092SP-28. It comes with a white cover and is operated manually so it is less expensive than an electronic option. I have attached a video of this vent being install on a trailer for you to check out....
  view full answer...
  
• Determining Correct Replacement Vent For Jensen 7000 Series Vent
  Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
  view full answer...
• Replacement Roof Vent Lid With 3-Point Hinge
  Thank you for the photo; from that it looks like you have a 4-point hinge (like in the accompanying photo I added) and we do have a cover, the Vent Cover for Jensen Trailer Roof Vents - White # 61628 which may work for you. If you have an older vent there is also the Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147 which fits 14" x 14" Jensen vents with pin-style hinge (pre-1994). Another option is the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 (White)...
  view full answer...
  
• Cargo Trailer Replacement Roof Vent Lid Recommendation
  Can you send me a picture of the assembly? Specifically the hinge so I can see what type of lid would fit.
  view full answer...
  
• Identifying Replacement Vent Lid When The Plastic Lid Is Gone
  To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following covers. Jensen for Metal Vent(starting with 2004) # CAM40153 Jensen-Pin Hinge(prior to 1994) # CAM40154 Ventline (prior to 2008) Elixir(starting with 1994) # CAM40155 Elixir(prior to 1994) # CAM40156 Ventline(starting with 2008) # BVD0449-A01
  view full answer...
  
• Replacement Roof Vent Cover for a Keystone Cougar 327RES 5th Wheel
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Roof Vent That Measures 13 X 13
  You do not have to buy a new RV, from your photo it looks like you need Replacement cover part # CAM40153. Although the vent itself may be considered 14 x 14 some roof vents came with smaller covers. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point...
  view full answer...
  
• Replacement Roof Vent for Pace American Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• How To Install Replacement Lid CAM40153 W/ 3 Point Hinge
  A 3 point hinge like the Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White # CAM40153 you were looking at just snaps on to the roof vents hinge, and then the metal strip in the center of the lid will get attached to the metal bar on your roof vent. I included a video of the # CAM40153 and a few pictures of it installed for you to take a look at.
  view full answer...
  
• Replacement Vent Lid for 1971 Holiday Rambler Galvanized Vent Frame
  The vent cover for your 1971 Holiday Rambler I recommend is the Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White # CAM40153 based on your description. If that vent doesn't look like the correct hinge, then I recommend the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White # MA00-335001 which will work with your galvanized vent frame. If you prefer, you can upgrade the entire vent as they are standard sizes. I recommend...
  view full answer...
  
• Installation of Replacement Lid for RV Vent with 3-Point Hinge
  In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
  view full answer...
  
• Replacement Vent Cover Recommendation for a 1982 Avion Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Vent Lid for an Elixir Vent
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Is It Necessary to See Vent Hinge on RV to Determine Correct Replacement Vent Lid
  Good question, and the answer is you do have to physically look at the hinge of your RV's vent in order to know the cover you need. There is no way to know any specific trailer parts based just off of the year, make and model of trailer. If you refer to the accompanying photo I added, you can see that there are four types of hinges: A continuous hinge such as the Ventline # BVD0449-A01, 4-point hinge such as the Replacement Lid for Jensen RV Roof Vent # CAM40154, and 3-point hinge such...
  view full answer...
  
• Vent Cover Replacement for a Lark Utility Trailer Availability
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• How To Find Replacement Vent Lid For a 2013 Continental Cargo GANS612SA Enclosed Trailer
  To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following covers. Jensen for Metal Vent(starting with 2004) # CAM40153 Jensen-Pin Hinge(prior to 1994) # CAM40154 Ventline (prior to 2008) Elixir(starting with 1994) # CAM40155 Elixir(prior to 1994) # CAM40156 Ventline(starting with 2008) # BVD0449-A01
  view full answer...
  
• Replacement Hengs and Jensen Vent Cover with Pin Hinge
  Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
  view full answer...
  
• Are Roof Vent Covers All The Same Size and How to Choose Replacement
  So to answer your question about the vent size, they are not all 13-1/4" x 13-1/4" as the sizes can vary somewhat. The part 69284 you mentioned has been discontinued, but apart from that most replacement roof vent lids are 14" x 14" or very close in order to fit on top of the vent. The industry standard for roof vents is 14" x 14", and that is likely what you have, though if you aren't sure of the model of your vent, to determine the right replacement is to a look at the hinge and find...
  view full answer...
  
• Replacement Vent Lid For Horse Trailer With Jensen Metal Vent Base
  You will need the Camco Replacement Lid # CAM40153. The images you sent show me you have the Jensen hinge for metal vent base. It appears you will want to apply some more Self-Leveling Sealant # 34427034145-1 around the vent as well. This will help prevent water from getting in around the screw holes or the base of the vent. You will want to clean the roof area really good around the vent and remove any loose sealant you already have. It is okay if you do not pull up all the old sealant...
  view full answer...
  

Do you have a question about this RV Vents and Fan?