See what our Experts say about this Roadmaster Tow Bar Base Plate

• Roadmaster Base Plate Kit and Adapter for 1993 Mazda Miata with Blue Ox Tow Bar
  The Roadmaster base plate kit that fits your 1993 Mazda Miata is the part # 711-4 that you referenced but then for an adapter to go from it to a Blue Ox Tow Bar you'd need the # RM-032 which you might have based on what you mentioned. You can compare what you have to the product pictures of this part number or you can email me pictures and I'll take a look.
  view full answer...
• Parts Needed to Flat Tow 1990 Mazda Miata
  In order to flat tow your 1990 Mazda Miata you are going to need base plates, a tow bar, safety cables, wiring to activate brake and turn signal lights, a supplemental braking system and likely a high-low adapter. The base plates that fit your Miata are the RoadMaster XL # 711-4 and the compatible RoadMaster Tracker Tow Bar # RM-020 which you referenced. For safety chains you can use the RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643. There are a couple of options for you...
  view full answer...
• Parts Needed to Flat Tow a 2008 Mazda Miata MX5 and a 1994 Mazda Miata
  You are correct, the parts you have selected will work well together on your 2008 Mazda Miata MX5. There are some other parts that will be required. First, you will need a set of safety cables. With the RoadMaster Tracker Tow Bar, item # RM-020, the RoadMaster Single Hook, Coiled Safety Cables, item # RM-643 would be a good choice and will wrap around the tow bar to eliminate dragging. You will also need a set of Roadmaster Tow Bar Quick Disconnects, item # RM-201, to disconnect the tow...
  view full answer...
• Components Needed To Flat-Tow 1993 Mazda Miata Behind Motorhome
  You sure can flat-tow your 1993 Miata behind your motorhome. Since we only offer Roadmaster base plates for your vehicle you have a couple options. I recommend the Roadmaster XL Base Plate Kit, part # 711-4. If you decide you want to go with the Blue Ox Alpha Tow Bar, part # BX7380, you will need the RoadMaster Base Plate to Blue Ox Tow Bars Adapter, part # RM-033. Then you will need the Roadmaster Tow Bar Quick Disconnect Kit, part # RM-201. If you decide this is too many components...
  view full answer...
• Where Does Base Plate Mount On 1999 Mazda Miata
  That is correct, base plates like the Roadmaster # 711-2 and # 711-4 use the front tie down plate mounts as mounting points. The # 711-4 with removable arms will use the front tie down plate mount and stabilizer bar mounts. The # 711-2 uses the front tie down plate mount and frame. I have attached the written instructions below. In addition to the base plates you will also need the following: -Tow Bar: Roadmaster Falcon 2 # RM-520 -Safety Cables: RoadMaster 68" Single Hook, Coiled Safety...
  view full answer...
  
• All Parts Needed to Flat Tow 1990 Mazda Miata
  There are a number of parts needed in order to flat tow your 1990 Mazda Miata, which I'll list for you: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # 711-4 - Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR - Wiring Kit: Roadmaster Wiring Kit # RM-152-1676-7 - Supplemental Braking System: Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 The base plates will be installed on your '90 Miata to give it an attachment...
  view full answer...
• What is a Complete Flat Tow Package for a 2001 Mazda Miata Towed Behind a 2021 Winnebago Travato?
  Hey there Nancy, Happy to get you the most cost effective parts so you can get your 2001 Mazda Miata flat towed behind your 2021 Winnebago Travato. Here is what you are going to need: - Base Plate: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 711-4 - Tow Bars: We have reached out to Roadmaster in the past about the tow bars for the 2001 Mazda Miata, they do not recommend a coupler style tow bar like the # RM-501 because it is going to put too much weight on the front of...
  view full answer...
• Parts Needed to Flat Tow a 1999 Mazda Miata
  For a base plate kit confirmed to fit your 1999 Mazda Miata that has removable arms you would want the XL Roadmaster kit part # 711-4. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. This tow bar has telescoping arms that will allow for easy connection and will fold up and store on the RV. For safety cables you can use # RM-643....
  view full answer...
• WhatTow Bar And Brackets Fit 2002 Mazda Miata MX5 That Will Not Damage Bumper
  When towing a vehicle with a tow bar you will need a tow bar, the required base plates and lights for the vehicle being towed. Also recommended are safety cables. For your 2002 Mazda Miata the RoadMaster Tracker Tow Bar - 5,000 lbs, # RM-020, will work with an additional base plate kit. You will need the Roadmaster XL Base Plate Kit, # 711-4, to attach to your car for the tow bar to connect to. The brackets attach to your car and the visible portions of the brackets can be removed when...
  view full answer...
• Base Plate With Removable Arms For Flat Towing a 2000 Mazda Miata With Blue Ox Tow Bars
  Currently the Roadmaster Crossbar-Style Base Plate Kit # 711-4 is the only base plate we have available for your 2000 Mazda Miata with removable arms. As you were looking at the Blue Ox # BX2514 I am assuming you have a Blue Ox tow bar. You can use the Roadmaster Adapter Kit # RO64FR to use the Roadmaster base plate with your Blue Ox tow bar. The base plate will require a Quick Disconnect Crossbar # 910021-00. The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 will...
  view full answer...
• Can Curt Tow Bar Attach to Base Plate Kit that Fits 2002 Mazda Miata
  For your Curt Tow Bar part # C19745 you can attach it to Blue Ox base plate kits with the adapter part # BX8833. There isn't a way to attach the Curt tow bar to Roadmaster base plates. If you have a 2002 Mazda Miata like I believe you do you'd want the base plate kit part # BX2514 and you'd be set with the adapter # BX8833.
  view full answer...
• Parts Needed to Flat Tow a 1991 Mazda Miata
  The first thing you will need is a base plate kit to provide the attachment point for tow bars to your 1991 Mazda Miata. For that you will want the part # 711-4. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you...
  view full answer...
• Will Roadmaster Base Plate to Tow Ready Towbar Adapter Fit 711-4 XL Base Plates
  Roadmaster replacement crossbar/adapter # RM-025 will fit the XL base plates you have, # 711-4. But in order to make the XL arms easily removable with this bar you will also need Quick-Disconnects # RM-201. I took some measurements of the bar and have included a picture showing them. The distance from the center between 1 set of tabs and the center of the other set is 30-5/8 inches.
  view full answer...
  
• Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow 1991 Mazda Miata MX-5
  The first item you will need to flat tow your 1991 Mazda Miata are base plates. We carry two different options of base plates for your vehicle. First are the XL Plates, # 711-4. These have removable drawbars held in place with a pin and clip. With the drawbars removed the base plates are virtually invisible. For these, trimming of the spoiler, air damn, grille, or plastic fascia may be required for installation. The other option are Standard Plates, # 711-2. These are fixed brackets and...
  view full answer...
• Is the StowMaster Tow Bar Compatible with Roadmaster XL Base Plate Kit on a 2001 Mazda Miata
  Yes, the Roadmaster Crossbar-Style Base Plate Kit # 711-4 for your 2001 Mazda Miata is compatible with both the 2" Hitch Ball # RM-501 and 2-5/16" Hitch Ball # RM-504 versions of the StowMaster tow bar. I reached out to my contact at Roadmaster who did say that it will fit but he is afraid that you will be putting too much weight at the front of your Miata since the tow bar stows there. He recommended going with a motorhome mounted tow bar like the Falcon 2 # RM-520 instead since it stores...
  view full answer...
• Parts Needed to Flat Tow a 1994 Mazda Miata
  For your 1994 Mazda Miata you will need to purchase the Roadmaster XL Base Plate Kit, item # 711-4. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the # RM-2120, and not have to worry about cutting...
  view full answer...
• What Parts And Accessories Do I Need To Flat-Tow 1990 Mazda Miata MX-5 Behind 2001 Winnebago Brave
  To flat-tow your 1990 Mazda Miata MX-5 behind your 2001 Winnebago Brave, you will need base plates, tow bar, safety cables, vehicle wiring or lights, and a supplemental braking system. For a base plate kit, you will need Roadmaster XL Base Plate Kit, part # 711-4. The XL Base Plate Kit features removable draw bars, so when you are not towing your Miata, the base plate brackets are less visible. For a tow bar, I would recommend the Roadmaster Falcon 2 Tow Bar, part # RM-520. The Falcon...
  view full answer...
• Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2005 Mazda Miata
  To flat tow your 2005 Mazda Miata you would first need Roadmaster XL Base Plates, # 711-4, that you have referenced. Please note these base plates will not fit the Mazdaspeed version of the Miata. Next, you would need a tow bar compatible with the XL style base plates, like the RoadMaster Falcon 2, # RM-520. I have included a link to the installation details and a video review for reference. To complete the towing set up for your Miata, you will need safety cables, lighting, and a supplemental...
  view full answer...
• Adapter to use a Blue Ox Aladdin Tow Bar with Roadmaster Base Plates on a 2000 Mazda Miata
  We do have the adapter needed to use the Roadmaster base plates # 711-4 with the Blue Ox Aladdin tow bar. You will need adapter # BX88178. In addition to the base plates and tow bar, you will also need safety cables unless you still have the ones that originally came with the tow bar. If you do need some you can use # RM-643. The Miata will also need a lighting solution. I recommend going with a simple magnetic kit like # RM-2120. This will bypass the vehicle wiring so you will not have...
  view full answer...
• What is the Most Economical Way to Flat Tow a 1994 Mazda Miata with a Nissan Murano
  I recommend going with the Roadmaster XL Base Plate Kit # 711-4 for your 1994 Mazda Miata because it has removable arms which will give your Miata more of an OEM look when you are not towing it with your Nissan Murano. A more economical option would be the Roadmaster Classic Base Plate Kit # 711-2, but it does not have removable arms. You can use the Tow Ready Adjustable Tow Bar, 5,000 lbs # 63180 that you referenced, but you will also need the Adapter # RM-025 and if you choose the base...
  view full answer...
• Recommended Parts Needed When Flat-Towing 2003 Mazda Miata
  The only baseplates we offer for a 2003 Mazda Miata is the Roadmaster XL Base Plates, part # 711-4. If you have a Blue Ox tow bar, we do offer an adapter that allows you to use the Blue Ox tow bar with the Roadmaster XL base plates. You would need part # BX88178. If you do not have a tow bar, I recommend the RoadMaster Falcon, part # RM-520. This would eliminate the need for an adapter with the RoadMaster base plates. If you are not familiar with flat-towing, you can check out the...
  view full answer...
• Adapter Needed To Connect A Roadmaster XL Baseplate Kit To A Blue Ox Tow Bar
  The Roadmaster Tow Bar Adapter # RM-032 is compatible with the Roadmaster Crossbar-Style Base Plate Kit # 711-4 and compatible with the following Blue Ox tow bars: Adventurer, Avail, Alpha, Acclaim, Allure, Aventa, Ambassador, Alexxa, Trion, Aventa II, Aventa LX, and Aladdin. If you have a different Blue Ox tow bar let me know and I can find the correct adapter.
  view full answer...
• Parts Needed to Flat Tow 1990 Mazda Miata
  The first thing you need to flat tow your 1990 Mazda Miata is a base plate kit. Which for that you'd want the Roadmaster part # 711-4 which is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terrain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect. For lighting/safety cables,...
  view full answer...
• Recommended Base Plates For A 1990 Mazda Miata
  For a 1990 Mazda Miata I recommend the Roadmaster Crossbar-Style Base Plate Kit # 711-4. This base plate will attach to your Roadmaster StowMaster as well. If you don't already have the tow bar wiring, braking system, and safety cables then I have the following recommendations for you: Tow Bar Wiring: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. Diode kit allows you to use your Mazda Miata's tail lights and wiring system while preventing feedback from your RV....
  view full answer...

Do you have a question about this Tow Bar Base Plate?