bing tracking image
  1. Bike Tools
  2. Feedback Sports
  3. Cycling Caliper
Feedback Sports Digital Caliper - 0" to 6" Range

Feedback Sports Digital Caliper - 0" to 6" Range

Item # 301-17068
lowest price pledge
Retail:$68.30
Our Price: $45.00
You Save: 34%
Bike Tools
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.8 lbs
Quantity: 
In Stock
Feedback Sports Bike Tools - 301-17068
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Digital caliper with LCD display measures precise inner, outer, and depth dimensions on your bike. Helps you tune up or find replacements for components. Measures up to 15.24 cm (6") in 0.01-mm increments. 1-833-496-1390 to order Feedback Sports bike tools part number 301-17068 or order online at etrailer.com. Free expert support on all Feedback Sports products. Guaranteed Lowest Price and Fastest Shipping for Feedback Sports Digital Caliper - 0" to 6" Range. Bike Tools reviews from real customers.
  • All Info
  • Reviews (1)
  • Q & A (0)
  • Photos
  • Why etrailer?

Feedback Sports Bike Tools - 301-17068

  • Cycling Caliper
  • Feedback Sports

Digital caliper with LCD display measures precise inner, outer, and depth dimensions on your bike. Helps you tune up or find replacements for components. Measures up to 15.24 cm (6") in 0.01-mm increments.


Features:

  • Digital caliper helps you find accurate inner, outer, and depth measurements on your bike for maintenance purposes
    • Provides more precise measurements when compared with a tape measure
    • Measures up to 15.24 cm (6") in 0.01-mm increments
    • Lets you measure your seat post, bottom bracket, adjustable handlebar stem, and more
  • Adjustable prongs let you measure inner and outer dimensions
    • Built-in tightening knob keeps prongs from moving
    • Thumbwheel opens and closes the prongs
  • Slide-out depth measurement probe built into shaft
  • Easy-to-read LCD gives readout in inches and millimeters
    • Change measurement modes with the "inch/mm" button
  • Zero (tare) button lets you zero out displayed measurement in any position
    • Lets you store and compare measurements of various components
  • Printed sticker on back of caliper lists common bicycle-specific measurements
    • Provides handy reference to seat post diameters, bottom bracket widths, and more
  • Durable, rust-resistant stainless steel construction
  • Automatic shutoff feature conserves power
  • (2) 1.55-Volt LR44 button cell batteries included
    • Miniature screwdriver included to open battery compartment
  • Protective carrying case with internal padding included


Specs:

  • Measurement range: 6" (150 mm)
  • Carrying case dimensions: 9-3/4" long x 3-1/2" wide x 1" thick
  • 1-Year warranty


17068 Feedback Sports Digital Caliper - Cycling Specific - 6"






Customer Reviews

Feedback Sports Digital Caliper - 0" to 6" Range - 301-17068

Average Customer Rating:  4.0 out of 5 stars   (1 Customer Reviews)

Digital caliper with LCD display measures precise inner, outer, and depth dimensions on your bike. Helps you tune up or find replacements for components. Measures up to 15.24 cm (6") in 0.01-mm increments.

by:

Looks like a fairly good quality measuring instrument. I like the fact that it has a zero re-set capability if and when the calibration gets a little out of whack.



1
1

See what our Experts say about this Feedback Sports Bike Tools



  • How to Find the Correct Replacement Bearings for 1997 Boat Trailer
    In order to find the correct wheel bearings, you can take apart your hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure. I've also added a link to a help article...
    view full answer...
    Image 1 for
  • How to Determine Correct Replacement Hub for a 1997 Four Winns Boat Trailer
    To ensure that you get the correct replacement hubs I will need to know your bearings and grease seal part numbers. If you cannot find any numbers on them you can measure your spindle in the locations where those parts ride (see attached photo) with a digital caliper like part # 301-17068 to the 3rd decimal place. Once you get those part numbers or dimensions to me I can help you find the correct replacement hubs.
    view full answer...
    Image 1 for
  • How to Determine the Correct Replacement Bearings for a Trailer
    If by serial number you mean VIN and the trailer manufacturer is still in business then yes, you would likely be able to obtain the bearing numbers from the manufacturer. If none of the above are true then the only other way to determine which bearings are correct for your trailer would be to either measure them with a digital caliper like part # 301-17068 to the nearest thousandth of an inch or read the numbers on them. If you need help with ether finding the bearing numbers or measuring...
    view full answer...
    Image 1 for
  • Replacement Grease Seal for a 5013/29772
    I was not able to reference the grease seal "5013/29772". We may still have a replacement for you but I would need you to measure either the inner diameter (I.D.) and outer diameter (O.D.) of the grease seal or the part of the spindle where the grease seal sits and the inner diameter of the hub where the grease seal is located. These measurements will need to be taken with a digital caliper like part # 301-17068 to the nearest thousandth of an inch. Once you find these measurements I...
    view full answer...
    Image 1 for
  • What Information is Needed to Add Brakes to a Trailer
    To add brakes to the front axle on your trailer I would need to know the weight capacity of your axle (which can be found stamped on the axle if you don't know it off-hand), as well as the part numbers of your Inner and Outer Bearings and you Grease Seal on your idler hub. The bolt pattern of your hub and size of your tire/wheel would be helpful as well. If you cannot find the part numbers on your bearings or seal then you can measure the B, C, and D locations on your spindle (see attached...
    view full answer...
    Image 1 for
  • Replacement Hub for 1997 Ranger Boat Trailer
    I was unable to find a reference for that part number, though there is a way to find the correct hub for you. Start by removing your current your hub and looking at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. Knowing this will allow us to find a compatible match. If you are unable to find the bearings, you would need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch...
    view full answer...
    Image 1 for
  • Finding the Correct Hub for Spindle on Single Axle Trailer
    No, you will need to get the correct hub assembly for your spindle. If you are unsure of what hub assembly you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure. I've also added a link to a help article on common bearing sizes, as well as a link to our available hub assemblies.
    view full answer...
    Image 1 for
  • How to Determine Correct Replacement Hub and Brakes
    In order to find the correct replacement hubs for your trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You...
    view full answer...
    Image 1 for
  • Replacement Bearings for a 2008 Yacht Club Trailer
    In order to find the correct replacement wheel bearing for your 2008 Yacht Club Trailer you have two options. You can either A) remove the hub and pull the bearing out while looking for the bearing number on the inner edge or you can B) remove the hub and measure where the bearing seats on the spindle and where it seats in the hub. If you were to measure the bearing then this would need to be done with a digital caliper like part # 301-17068 to the nearest thousandth of an inch. In some...
    view full answer...
    Image 1 for
  • How to Choose Correct Replacement Bearings for a 2004 Haulmark Low Rider Trailer
    Although we don't have a way to tell right off hand what bearings and seal your axle has, if you pull your hub there should be part numbers on your bearings and seal. Let me know what those are and I can help you out. If you cannot find the part numbers then you need to use a digital caliper like part # 301-17068 to measure your spindle to the 3rd decimal place (1.234 for example). I have attached a picture showing where on your spindle you would need to measure.
    view full answer...
    Image 1 for
  • What to Measure to Find Replacement Hub
    No, more information will be needed to find the correct replacement hub for your trailer. You'll need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths...
    view full answer...
    Image 1 for
  • Locating Replacement Bearings for 1995 Jayco Eagle 10 Pop Up Camper
    Trailer manufacturers don't usually keep a good record of parts like these that they install at the factory, so the best way to determine the correct replacement bearings for your Jayco Eagle 10 is to simply pull a hub and check for the numbers. These numbers should be stamped right inside the bearings themselves. If you cannot locate or read the numbers, you can also take a few measurements along the spindle where the bearings sit with a digital caliper like # 301-17068. I have attached...
    view full answer...
    Image 1 for
  • Replacement Grease Seal for Dico 16859 Trailer Hub
    In order to find the correct replacement grease seal for your 1986 Northwoods Boat Trailer with Dico 16859 hubs you would need to measure the spindle and trailer hub where the grease seal sits with a digital caliper like part # 301-17068 to the nearest thousandth of an inch. I have attached a photo to assist as well in addition to our selection of grease seals. Unfortunately, I was not able to reference the Dico 16859 hub.
    view full answer...
    Image 1 for
  • Replacement Wheel Bearing Kit for a Big Tex 30SV Trailer
    In order to find the correct wheel bearing kit for you we are going to need to know your bearing and grease seal numbers or measurements. The number can be found stamped into each bearing or seal but if they are not legible then you will need to measure them with a digital caliper like part # 301-17068 to the nearest thousandth of an inch. This is the only way to determine what are the correct bearings/seals for your trailer, short of contacting the manufacturer which would require the...
    view full answer...
  • Correct Bearings for a Changzhou Nanxiashu Sportstar II Trailer
    In order to find the correct bearings for you we are going to need to know your bearing numbers or measurements. The numbers can be found stamped into each bearing but if they are not legible then you will need to measure them with a digital caliper like part # 301-17068 to the nearest thousandth of an inch. This is the best way to determine what are the correct bearings for your trailer. I have attached a help article which explains all of this for you. Once you find the numbers/measurements...
    view full answer...
  • How to Determine a Replacement Hub Assembly for a Thule Utility Trailer Model N5X8T
    To determine what the correct hub assembly will be for your Thule utility trailer you will first need to remove your current hub assembly and let me know what the inner and outer bearing numbers are as well as the grease seal inner and outer diameters. If you can find part numbers then you will need to use a digital caliper like part # 301-17068 and measure the parts of your spindle in the attached picture to the 3rd decimal place (1.234 for example). I spoke with my contact at Thule...
    view full answer...
    Image 1 for
  • How to Find the Correct Grease Seals for a 2002 Trailstar Boat Trailer
    In order to make sure you have the proper grease seal for your hub and spindle, I would need you to measure the spindle where the grease seal rides and the trailer hub where the grease seal sits. These measurements will need to be taken to the nearest thousandth of an inch with a digital caliper like part # 301-17068. Once you can provide me with them I would be glad to see if the grease seal you have now is correct or if we have a better one for you. The double lip grease seal as you mentioned...
    view full answer...
  • How to Identify Correct Replacement Hub Based on Bearing Part Number or Spindle Dimensions
    The bearings in trailer hubs are measured to very precise dimensions, to the nearest thousandth of an inch, such as 1.234-inches. To find a suitable replacement hub to fit on your existing trailer spindles either the bearing part numbers or these precise measurements are needed to ensure you select a hub that fits on the spindles. The new hub must use the same bearings as the original. If you refer to the linked photo you'll see how these part numbers typically appear on bearings. If these...
    view full answer...
    Image 1 for
  • How to Measure Hub Bore to Determine Fit of Bearing Buddy Grease Cap
    Bearing number 30205 is not a bearing that we offer and after doing some research it seems its dimensions do not match with any bearings that we currently carry. This is not unusual with imported trailer products. There is a way to measure your hub's outer bore to determine if there is a Bearing Buddy bearing protector to fit. Use a precision digital caliper like # 301-17068 to measure the hub's outer bore. The you can use the linked page that displays all Bearing Buddy parts to select...
    view full answer...
  • Determining Correct Replacement Bearing
    Since your bearing L44848 is not a typical bearing number the best way to know what replacement bearing will work is to use a Digital Caliper # 301-17068 and measure the inner and outer diameters of your bearings and grease seal. You can measure the inner parts by measuring the B, C, and D locations of your spindle in the attached picture. You will then just need to measure the corresponding locations on your hub for the outer diameter measurement. Once you find those measurements you...
    view full answer...
    Image 1 for
  • How to Choose the Correct Replacement Hub
    To ensure that you get a hub that fits your spindle correctly you will want to use a Digital Caliper # 301-17068 and measure points B, C, and D (see attached picture) of your spindle to the 3rd decimal place, for example 1.750. These measurements will help us to determine what bearings sizes and grease seal that the replacement hub needs for it to be compatible with your spindle. From your description I can tell that you have a 5 on 4-1/2" bolt pattern on your hub, but I am not quite sure...
    view full answer...
    Image 1 for
  • How to Find the Correct Grease Seal for a 2002 Coleman Santa Fe Popup Camper
    To determine what grease seal you need for your 2002 Coleman Santa Fe popup you will need to remove your hubs and look to see if there is a part number on it. If there isn't a part number you can simply use a Digital Caliper # 301-17068 to measure the grease seal seat on your spindle (location B on the attached picture) for the inner diameter and then measure the place where the grease seal sat in your hub for the outer diameter. You can then filter through our linked selection of grease...
    view full answer...
    Image 1 for
  • Method to Figure Out the Correct Replacement Hub Assemblies
    Thank you for the information, but a bit more specificity is needed to ensure we get you the right parts. If you wipe away the grease you might be able to see the part number stamped directly on the bearings themselves. If you are unable to find them, you would need to use a digital caliper such as # 301-17068 and measure your spindle to the thousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure. I've also added a link...
    view full answer...
    Image 1 for
  • Which Bearing Seal do I Need for My 1995 Pontoon Trailer?
    To determine the bearings on your boat trailer, you need to either get the bearing numbers off of them, measure the bearings themselves, or measure the spindles where the bearings sit. You need to use a digital caliper, Part # 301-17068, because it needs to be as exact as possible. Unfortunately we don't have a way of knowing which bearings your trailer uses with the axle capacity. We can usually narrow it down, but the only way to be sure is by measuring.
    view full answer...


< Previous
123. . .15



Do you have a question about this Bike Tool?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality bike tools for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate bike tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Evangeline M
Installed by:
Evangeline M
Employee Scott K
Written by:
Scott K
Employee Jason W
Updated by:
Jason W
Employee John S
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390