Looking For Replacement Parts For Roadmaster Falcon 2 Tow Bar

Question

Question:

I have a falcon tow bar that needs a little work. Can you help me? Thanks, Tom

asked by: Tom M

0

Expert Reply:

Hello Tom. It sounds like you are looking for replacement parts for your Roadmaster Falcon 2 Tow bar Part # RM-520. You did not mention what exactly you are looking for, so here is a list of all of the replacement parts we carry for this tow bar:

- Replacement End Cap for Roadmaster Falcon and BlackHawk Tow Bars - Qty 1 # RM-200140-40

- Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars - Qty 2 # RM-910029

- Replacement Hardware Kit for Roadmaster Falcon All-Terrain and BlackHawk 2 All-Terrain Tow Bars # RM910003-85

- Replacement Inner Arm for Roadmaster BlackHawk 2 All Terrain and Falcon All-Terrain Tow Bar # 910021-65

- Replacement Bushing for Roadmaster StowMaster and Falcon Tow Bars - Qty 1 # RM-200029-70

- Roadmaster Autowlok Locking Pin Repair Kit for Falcon 2 and BlackHawk Tow Bars # RM-910003-80

- Replacement Hardware Kit for Roadmaster Falcon 2 and BlackHawk Tow Bars # RM910003-65

- Replacement Finger Guard for Roadmaster Falcon Tow Bars # RM-A001237

- Replacement Driver's Side Inner/Outer Arm Assembly for Roadmaster Falcon 2 Tow Bar # 910021-70

- Replacement Inner Arm for Roadmaster Falcon 2 and BlackHawk Tow Bars # C000172

- Replacement Split Bushing for Roadmaster BlackHawk 2 and Falcon Tow Bars - Qty 1 # RM95FR

- Replacement Yoke for Roadmaster BlackHawk and Falcon Tow Bars # RM-480001

expert reply by: Jesse M

0

Answer 1

It sounds to me like the tow bar arm is probably just dirty. Over time, dirt and debris can build up on the arms and when it retracts the dirt is carried to the inside of the arm which can cause it to not function properly. I recommend that you…

view full answer...

Answer 2

I spoke to my contact at Roadmaster and they said a couple of different things could be going on. You could not be totally latching the arms into place, or you may not be doing the initial S-turn that is required to lock both arms into place.…

view full answer...

Answer 3

Your memory does serve you right and both arms on your Roadmaster Falcon 2 #RM-520 are designed to "lock up" as this is not a non-binding tow bar; whether or not they've been able to get the arms to lock without performing the two sharp…

view full answer...

Answer 4

The repair kit that you will need for your Falcon 2 Tow Bar, #RM-520, is the Locking Pin Repair Kit, #RM-910003-80. The Autowlok feature on your tow bar is not engaging, so this repair kit will replace the inner locking mechanism which includes the…

view full answer...

Answer 5

If there is any doubt at all, I would replace any worn parts. With a tow bar that has seen as much action as your Falcon II, #RM-520, it would be a good idea to give it some replacement parts so it will continue to serve you well. In the realm of…

view full answer...

Answer 6

I spoke with my contact at Roadmaster and he stated that the most likely problem with your Falcon 5250 Tow Bar not latching is the Autowlok button or buttons will need to be replaced. he said that often times the spring inside goes bad over time and…

view full answer...

Answer 7

I reached out to my contact at Roadmaster for clarification on this and he informed me that you can in fact replace the outer arm bushing on both the Roadmaster Blackhawk and Blackhawk 2 tow bars #RM-422, using the Roadmaster Repair Kit for…

view full answer...

Answer 8

We do have some repair/replacement parts for your Roadmaster Falcon All Terrain Tow Bar #RM-522 including the following: Repair Kit - #RM910003-85 Nylatron Bushing - #RM-200029-70 Inner Arm - #910021-65 Round Nut - #RM650004-80 Attached is a picture…

view full answer...

Answer 9

It sounds like you need to give your BlackHawk 2 All Terrain Tow Bar #RM-422 a good cleaning. I reached out to my contact at Roadmaster who said that you want to extend that inner arm out all the way and then apply a liberal amount of dish soap that…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Looking For Replacement Parts For Roadmaster Falcon 2 Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching