Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,800-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
Use this with actuators or standard couplers to build a foldaway tongue that tucks your trailer neatly out of the way, perfect for tight garages. Weld-on mounting creates a clean look. Easy storage, clean style, and solid function.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 1,400-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
This hub-and-drum assembly fits 7,000-lb axles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, oil seal, oil cap, wheel bolts, and cone nuts included.
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
Lost a grease cap on the road? It happens. Or maybe you just want to upgrade your caps. This kit gives you 2 chrome grease caps and plugs to keep your hubs sealed and your bearings happy. And the plug pops out for easy access - no mess, no fuss.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.
This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, and a cotter pin.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.
Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.
Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Drop-N-Go auto-latch coupler automatically locks your coupler in place on 2" hitch balls. Designed for hydraulic drum brake applications.
Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.
This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.
Filter Results
