Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 part number: Y00428
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Clear anodized alloy finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06145
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006145 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06143
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006143 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06145
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06143
Average Customer Rating: 4.8 out of 5 stars (2284 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Paul06/01/2023
2012 Toyota Corolla
Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.1591827
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation1757391
by: MB07/12/2021
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.1091513
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.644881
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe1177539
by: Phillip09/29/2021
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.1176579
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: William02/28/2024
You guys provide great products and excellent customer service. Thanks1739476
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: James08/10/2019
2019 Subaru Forester
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!688144
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit) One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes. Used in rain at least once, (sustained 60mph), with no leaks.400058
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Djones06/18/2018
2018 Jeep Grand Cherokee
Easy to install. No noticeable noise from the bars. Seem to be very sturdy.523537
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.606911
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.657997
by: Ivars07/04/2020
Yakima Jetstream cross bars.. nice bars worth the extra money. can be adjusted for pitch/angle of attack to "tune" the air profile.. mine have absolutely no high speed wind noise or whistling.. rubber weather strip underneath further smoothes the bar profile.. quietest roof rack system I have ever owned..828272
by: Earl07/28/2022
The crossbars are light and very strong. They fit perfectly and installed easily.1340527
by: Gina 08/04/2021
Lexus
I purchased the Baseline towers with base clip fit kit and jetstream crossbars. They were great quality and the instruction materials included for assembly and installation were great. I was able to assemble and install on my Lexus CT 200 in about an hour. It looks nice too!1113696
I would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed.
I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for view full answer...
Correct, the SightClip 25 is indeed our part number # Y27AR. To mount the Yakima roof rack to your 2023 Kia Niro EV, here are all the parts you'll need:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SightLine Towers for Yakima Crossbars # Y64AR
- SightClip Fit Kit # Y27AR
You made a really nice choice going with the Yakima rack for your Kia, as it will give you a quiet, durable, easy-to-use roof rack that also looks great. The only other thing I recommend view full answer...
I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof.
I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the view full answer...
The Yakima JetStream roof rack that fits your 2014 Chevy Impala includes the following parts:
50" Yakima JetStream Crossbars - # Y00428
BaseLine Towers - # Y28TR
Front BaseClip - # Y06124
Rear BaseClip - # Y06126
Lock Cores - # Y07204 (optional)
I listed which clip should be in which position above but if I hadn't told you this, you can find these fitments in the instructions or on the Yakima website.
Attached are some videos for you to check out! view full answer...
The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06153
- BaseClip Fit Kit # Y06154
I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration view full answer...
Yes, a roof rack for your 2007 Toyota Corolla sedan with a naked roof will allow you to use a cargo basket, including the Arksen basket you mentioned. You can go with the Yakima as well, and the parts needed that fit your '07 Corolla sedan with a naked roof are the following:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06148 & # Y06136 view full answer...
In order to add a Yakima roof rack to your 2014 Acura MDX with flush side rails, you will need the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245 view full answer...
To use a rooftop tent on your 2021 Subaru Outback, you will need to add a roof rack, which will allow you to choose from a couple of different tent options. First let's start with the rack you'll need, which is from Yakima and consists of the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 27 for Yakima SkyLine and Control Towers # Y46VR
This is going to give your '21 Outback a very view full answer...
First for a set of crossbars on your 2013 Volkswagen GLI, I recommend going with the Yakima JetStream Crossbars # Y00428 with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06137 & # Y06126.
These crossbars are going to work with your Volkswagen's naked roof, measure 50" long x 2-3/4" wide x 1-1/8" tall, and has a dynamic weight capacity of 165 lbs.
For a roof basket, I recommend going with the popular Thule Canyon view full answer...
To add a roof rack to your 2024 Subaru WRX, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 item # Y53TR
Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
This aero bar roof rack system has a 165 lbs capacity. I recommend adding view full answer...
The best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SightLine Towers for Yakima Crossbars # Y64AR
- Landing Pad 22 for Yakima Towers # Y00248
The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air view full answer...
To attach a roof rack to your 2023 Honda HR-V, with no roof rails, you will want the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06159
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06181
These crossbars have a 165 lbs view full answer...
Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428
SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach view full answer...
The correct Yakima roof rack for your 2021 Hyundai Kona with a bare roof is made up of the following parts:
Naked Roof
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- BaseLine Towers for Yakima Crossbars # Y33TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06175
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06131
For added protection, I recommend considering adding locks to the rack with the Same Key System Lock Cores # Y07204.
Once view full answer...
Your kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00428 view full answer...
There isn't an adapter that can convert a Baseline tower to fit raised rails so you would need to go with a Timberline Jetstream setup that fits your 2013 Subaru XV Crosstrek with the part number # Y00428 and # Y33TR. view full answer...
Sure can; I checked with Yakima and the correct parts for a Yakima roof rack on your 2024 Subaru Outback Wilderness are the following:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- TimberLine Towers for Yakima Crossbars # Y33TR
I also recommend protecting your investment by adding locks to secure the rack; you can do this with the Yakima Same Key System (SKS) Lock Cores # Y07204. view full answer...
Yes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409. view full answer...
I have some potential solutions for you, however, there is not a Thule roof rack fit available for your vehicle.
For basic racks that are similar to Thule, I recommend Yakima's Round Bar or JetStream kits.
The base kit for your vehicle is made up of parts that will work with whatever bar style you choose. It is made up of:
BaseLine Towers for Yakima Crossbars, part # Y28TR
BaseClip Fit Kit for 2014 Nissan Altima, Front, part # Y06137
BaseClip Fit Kit for 2014 Nissan Altima, view full answer...
There are many different parts that are needed for various vehicles, so it is difficult to piece together complete package kits for each and every vehicle on the road which is why you sometimes see a few parts that are required for a complete roof rack. If you go into our vehicle fit guide and enter in all of your vehicle's information, you should be able to see every part that is required for each roof rack system.
It looks like you were checking out the BaseLine Towers # Y28TR. These view full answer...
There is definitely a roof rack from that will fit securely on your 2020 Hyundai Venue with a naked roof; the rack is made from Yakima which means it is really high-quality, and uses aero-shaped bars to ensure you have a quiet ride. The roof rack for your Venue consists of:
- Yakima JetStream Crossbars # Y00425
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170 and # Y06187
- Same Key System Lock Cores (Optional) # Y07204
The view full answer...
If this were my 2020 Toyota Highlander the roof rack I would put on it would be Yakima because it will give you a larger amount of crossbar space than most racks so you can hold the most gear, it is extremely quiet, highly durable and looks fantastic. The rack that fits your 2020 Toyota Highlander with a naked roof is made up of the following parts:
- Yakima JetStream Crossbars # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06153 and # Y06132
- Same view full answer...
The Q150 clips part # Y00750 would be the correct clips to use on your 2015 Ford F-150 to use with a Control Tower roof rack but they have been discontinued. It sounds like you have a Yakima round bar roof rack though so I can help you piece together a few more parts to complete the rack on your truck.
You would need the BaseLine Towers part # Y28TR, the Round Bar Adapter # Y03536 and then 2 sets of the fit kit part # Y06122. With the 58 inch round bars part # Y00409 that you already view full answer...
The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great.
I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof view full answer...
Since the rack he has is for raised rails and the crossbars are only 38" in length you wouldn't be able to use any of the components and would need a completely new rack. A 2002 Toyota 4Runner has a minimum bar length of 48" so for a round bar setup on a naked roof you would need the following components:
Yakima RoundBar Crossbars # Y00408
BaseLine Towers for Yakima Crossbars # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06171
If view full answer...
I have a kit that would be perfect for your set up. I would get the BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06152 to get the feet attached to your roof. Then you will need the RoundBar SL Adapter # Y03536 to get your round Yakima Roof Bars secured to your roof rack foot packs.
This kit will look and work the best on the roof of your 2021 Honda Passport since you already have round Yakima roof bars. view full answer...
For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y28TR.
Please refer to the two linked videos for more on this kit and how to install it. view full answer...
In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
The best-looking roof rack for your 2013 Lexus ES 350 is from Yakima and you can choose the color of crossbars you want, either black or silver. The rack consists of the following parts but please be aware there are no roof racks that fit your Lexus if it has a glass roof:
- Yakima JetStream Crossbars # Y00425 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06175
- BaseClip Fit Kit # Y06160
And for a wind fairing a good fit for this rack on your Lexus view full answer...
I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable.
To replace the roof rack for your vehicle, you'll need:
- Yakima BaseLine Towers, part # Y28TR
- RoundBar SL Adapter for Yakima Towers, part # Y03536
- BaseClip Fit Kit for Baseline Roof Rack, part # Y06145
- BaseClip Fit Kit for Baseline Roof Rack, part # Y06153
Note that you'll view full answer...
The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers.
In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit view full answer...
We checked with Yakima and their Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06102, and # Y06139 is a confirmed fit for your 2016 Ford Edge with the panoramic roof. This would be a great option that would fit perfectly so we highly recommend it. view full answer...
Due to the roof design of your 2018 Jeep Grand Cherokee the only roof rack solutions we have require clips that mount to the door frame. You'll have to use the Baseline feet part # Y00146, the BaseClip fit kit part # Y06121 (quantity of 2), and then the roundbar adapter part # Y03536 to reuse your crossbars like the # Y00408. view full answer...
I can help you get a roof rack system and bike rack for your 2015 Mazda CX-5.
The Yakima rack that I would recommend for you is made up of the following parts:
# Y00422 - 60 inch Corebar Crossbars
# Y28TR - BaseLine Towers
# Y06130 - BaseClip fit kit
# Y06132 - BaseClip fit kit
Since your roof is a naked style you will need the use of the fit kit clamps featured in the above listed setup.
One of the reasons Yakima may have been unclear about if the Qtower would work or not is view full answer...
The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189.
This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
For your 2017 Subaru Legacy with a naked roof you will first need to install a roof rack with crossbars that run from side to side so that you can mount a snowboard rack.
Since you like Yakima their round bar roof rack that consists of part numbers # Y00409, # Y28TR, # Y03536, # Y06145, and # Y06130 would be where you would want to start.
Then depending on how many boards you want to carry we have a couple options. We have the part # Y03095 which will carry up to 2 board or the part view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.