Hayes Syncronizer Trailer Brake Controller - 1 to 2 Axles - Time Delayed part number: HA81725
This time-delayed brake controller has a straightforward design that makes it easy to use. Includes an LED indicator and manual override. Activates brakes with a preset intensity.
Features:
Brake controller activates trailer brakes with preset intensity
Adjustable power output lets you select the amount of braking force
Thumbwheel located on front of module for easy access
Red LED indicator on front of unit illuminates when trailer's brakes are applied
Light glows brighter as power output increases
Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies
Built-in safeguards protect your vehicle and your trailer
Current limiter protects vehicle from shorts in the trailer wiring
Hazard flasher immunity prevents pulsing of the brakes when flashers are activated
Dependable solid-state construction
Quick and easy installation with no mounting restrictions
No need to mount level - install anywhere at any angle
Mounting bracket and hardware included
Plug-in, vehicle-specific brake control adapter (sold separately) available for select vehicles to reduce installation time
Made in the USA
Specs:
Application: trailers with up to 2 axles (4 brake assemblies)
Compatible with electric brakes only
Dimensions: 5-1/4" long x 3-1/8" wide x 1-1/4" tall
3-Year limited warranty
Built-In Controls on the Syncronizer
Power Output Control
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change. Use the thumbwheel on the left of the module to change your settings.
Red Indicator Light
The red LED indicator light illuminates when the trailer brakes are applied. This light glows brighter as the power output to the trailer brakes increases.
Slide-Bar Manual Override
The Hayes Syncronizer keeps the manual override within easy reach on the front of the module, great for stopping sway or controlling your trailer's momentum in emergencies. Push the slide-bar lever to activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Quick, Simple Installation
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override.
If your vehicle already has a plug-in brake controller wiring harness, just connect the unit to it. Otherwise, you will need to purchase a vehicle-specific wiring harness (sold separately) to plug into. If a harness is unavailable for your vehicle, hardwiring will be necessary.
Installation Accessories
See also etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Note: If a custom brake control wiring adapter is not available for your vehicle, a 20-amp circuit breaker (sold separately) may be required for installation.
Time-Delayed Braking
The Hayes Syncronizer comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Syncronizer. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. The amount of braking power (output) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
81725 Hayes Synchronizer Electric Brake Controller - Time Based
Is this right for you? Product Expert Kathleen M says:
Yes, if you:
Are replacing an older brake controller and just want something simple
Are used to the old-school time-delay function
Prefer American-made products
No, if you:
Have a trailer with more than 2 axles
Worry about your brakes locking up and wearing out your tires prematurely
Like having detailed installation and troubleshooting instructions
Custom Wiring Adapter for Hayes Brake Controllers - Dual Plug part number: HA81780-HBC
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the junction box beneath your vehicle's dash.
Features:
Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
No cutting or splicing required
Custom connector end plugs into the electric junction box beneath the dash of your vehicle
Opposite end plugs into the back of your electric brake controller
Compatible with time-delayed and proportional brake controllers from Hayes
Made in the USA
Installation of Hayes Brake Controller Adapter
To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, in which the wiring is run for you from the dash to the trailer connector on the back of your vehicle. Usually when this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port that is built into the electric junction box underneath your vehicle's dash. The black box is located to the left of the steering column, just above the carpet. To plug in the adapter, first remove the cover on the box. The adapter plugs into the second slot from the left, on the top row.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
81780HBC Hayes Dual-Mated Brake Control Wiring Harness - Chevrolet, GMC, Cadillac, Hummer
Hayes Syncronizer Trailer Brake Controller - 1 to 2 Axles - Time Delayed - HA81725
Custom Wiring Adapter for Hayes Brake Controllers - Dual Plug - HA81780-HBC
Average Customer Rating: 4.8 out of 5 stars (97 Customer Reviews)
This time-delayed brake controller has a straightforward design that makes it easy to use. Includes an LED indicator and manual override. Activates brakes with a preset intensity. Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the junction box beneath your vehicle's dash.
by: Ryan H04/08/2024
Super fast delivery and easy plug and play installation. Would highly recommend1761555
by: Benjamin08/22/2023
Super easy to install and the additional information they provided for my specific vehicle made it possible for me to have every piece necessary for a seamless installation.1652518
Great price, no delays, came the same day as promised. You should feel very comfortable dealing with etrailer1721163
by: Don 02/06/2024
Great price, no delay as it came the same day as promised. Feel very comfortable dealing with etrailer !1721162
by: Lawrence 09/07/2023
Splicing the wires was no problem. Instructions were good. The only recommendation that I will give is that you trash all screws with flat screw driver heads. I also opted for bolts, nuts & washers for attaching the bracket.1662486
by: Ed09/13/2023
I think it will be a good brake controller, I have not had a time delayed on before.1666598
by: Rodney04/07/2024
Nice product and very easily installati on.1761047
by: Rod 02/13/2024
works great 1731189
by: Bob P.04/10/2016
Original supplied item was defective, however Hayes customer service immediately sent another unit and it works great. With the addition of a small removable slip in bracket for the console of my 2012 GMC 1500 Crew Cab and the wiring adapter, I can simply plug and play when I need the controller as opposed to a permanent installation that I have in my other pickup.243611
by: Big D10/16/2014
Hyundai Genesis
My Genesis brake contoller s**t the bed. My Genesis was warrantied without a receipt, (thumbs up to Genesis), but did not include the wiring harness. My original Genesis did not have the "Quick Connect". I was going to try to use my original harness, but I did not want to chance burning out a new controller, because I wired something wrong. With the "Quick Connect" harness, your only problem is finding the right connection on your truck. (The harness will ONLY connect to the right position.) The "Quick Connect" harness saves much time and effort over trying to find the correct connections yourself. 156360
by: Jonas08/04/2023
Installation was simple and straightforward. Took less than 30 minutes from start to finish.1638842
by: Dylan 04/10/2021
Works well. I like the delayed brake activation, it seems to be a smoother transition. The custom harness makes installing this controller easy and FAST. Love buying Made in the USA products and etrailer.com has a lot of them.1007036
by: Larry 07/28/2023
Looks good! 1634674
by: Frank 11/16/2019
easy to install. Brakes tested good to trailer. I used self taping screws to mount brackets, rather than the bolts and nuts that it came with.It was to difficult to get my hands in position to use bolts and nuts (no big deal).726182
by: Dave 2018 ram 1500 eco 04/07/2019
Installed in 10mins in 2018 ram 1500 ecodiesel, have not used with trailer yet. Seems good for price, mounting bracket could be made a little better. Good service from e trailer 619266
by: 09/25/2023
Cable plugged in easy and works correct ly.1672979
by: Gary03/19/2015
Good controller at a good price. Works as expected. Fast shipping at standard rate. This controller was installed in an 08 Sprinter camper with the help of the on line video from etrailer. Thanks, Gary179652
by: Nick 04/24/2023
Fit perfectly. Followed instructions and it works as it should. Great product at a great price.1563173
by: Dylan 09/26/2021
This is the 2nd one of these I’ve bought. I like the time delay application to the brakes. Always will try to buy products made in the USA. The price went up since I bought this same controller 1 1/2 years ago.1163471
by: Kevin08/22/2019
2006 Chevrolet Silverado
Instructions was very helpful and product worked on a Tow Smart Synchronize trailer brake controller.692499
by: Rob08/27/2016
Installed in 10 minutes. Works excellent and combined with the wiring adapter was a simple plug and play.288285
by: Joe 04/14/2021
Was easy to install and adjust. Works great applying breaks to my single axle dump trailer.1010474
by: Don01/25/2022
Controller working now. Tow vehicle needed fuse to power 12V+ pin on 7 way1252397
by: Andrew Ammerman04/11/2017
The trailer seems to be holding up just fine. It was a good investment for my small business and I'm thinking about buying another from you.367445
by: Douglas04/22/2019
Happy with the service I get from etrailer, and the fantastic selection of products. I spoke with both Paula S. and Odelia K. and they were very helpful and knowledgeable, and courteous. I am a kind of "old school" consumer and I like that you provide excellent phone support. One thing that would be helpful would be a mention right on the product web pages about why there are two seemingly identical listings for each product. Odelia said once one sends a product to the checkout basket then one is given reason for the two choices. It would be less confusing to have that reason in the preceding pages. Speaking of old school, this is the first time in my long life that I have installed a trailer brake controller and trailer light wiring without having to splice or cut anything. "New school" does have its advantages! Great store, thank you!634054
The display on the Hayes Syncronizer Trailer Brake Controller # HA81725 should illuminate both when you press the brake pedal and when you use the manual override lever. If it does not light up when you press the brake pedal then either there is a problem wit the red wire's connection to the brake light circuit or you have the power set so low that the display does not light up.
The controller will apply full power with the manual lever but with the brake pedal it will illuminate only view full answer...
The brake controller connector is located behind a panel just to the left of the glove compartment, as shown in the provided photo. The wiring harness adapter used will depend on the brake controller you end up using. I see that you've looked at a Hayes Syncronizer # HA81725 brake controller. If you use a Hayes controller, you'd need the # HA81788-HBC adapter. For a Tekonsha or Draw-Tite, use # 3034-P or for a Curt controller, use # C51432.
Rather than a time delayed controller like view full answer...
We have several choices that would be a fit for you, I'd recommend the Curt Class III receiver hitch, part # 13055. The hitch has a respectable 600 lb tongue weight/ 6000 lb towing capacity, so it'd be the perfect choice. The hitch is pretty simple to install, with no drilling required.
For a trailer wiring harness, use part # 118551.
For a ball mount, # AMSC2 would work very well. The coupler on your trailer will list the necessary trailer ball. For a 1-7/8 inch diameter ball, use view full answer...
The correct wiring harness that will connect the Hayes Syncronizer Trailer Brake Controller part # HA81725 to factory wiring harness on your 2009 Dodge Ram 2500 is the Custom Wiring Adapter for Hayes Brake Controllers part # HA81782-HBC. This a complete plug and play option that will not require hardwiring unless you do not already have a factory trailer connector installed, in that case you will need to use the hardwire wiring harness that comes with the Hayes Syncronizer Trailer Brake view full answer...
That is not normal. The Hayes Syncronizer Trailer Brake Controller - 1 to 2 Axles - Time Delayed # HA81725 should not give off any smell and should not be activating the brakes enough to cause smell if installed and adjusted properly. I've attached a video of this installation for you to reference.
When installed correctly, this unit should be adjusted for sensivity. This conroller has a red LED indicator on front of unit that illuminates when trailer's brakes are applied. This view full answer...
Yes, the Hayes Syncronizer Trailer Brake Controller # HA81725 is a good choice with your Honda Goldwing.
A time delayed controller is a better choice on a motorcycle because of the limited space for installation. A proportional controller has more limitations as to how they can be mounted which will be an issue on a bike. Also, the leaning of a motorcycle while turning will tilt the controller and a proportional controller cannot function this way.
To connect the controller to the view full answer...
To disconnect the Hayes brake controller you can simply unclip the wiring connection behind your trailer brake controller and tuck it out of the way. Then you can remove the brake controller from it's mount and either discard it or sell it. It will not in any way effect the braking on your vehicle. It only captures the brake light signal and then sends power to a trailer with brakes. Removing it will have no impact on your vehicle but only on your trailer towing ability. view full answer...
We offer the Ford-specific Hayes brake controller wiring harness as part # HA81783-HBC. One end of the harness plugs into the connector under the dash, the other plugs into the pigtail exiting the rear of the Hayes # HA81725 Synchronizer brake controller.
The brake control connector on your E-series van is located either under the left side of the dash or next to the center console. It will be in the very corner where the floor board, firewall and the left kick panel come together. This view full answer...
I'd be happy to assist with that.
In addition to the # HA81725 Hayes Synchroinizer brake controller, you'll need a universal wiring harness, part # HA81789-HBC and our Brake Controller Installation Kit, part # ETBC7. The kit includes everything necessary to install a brake controller in your vehicle, with the exception of the controller itself and a 4-pole trailer wiring harness for the vehicle.
If you click the provided link, you can see some FAQ articles about installing a brake view full answer...
The Hayes Syncronizer Trailer Brake Controller # HA81725 does not have a time from brake activation to full intensity. Reason is this depends on the amount of power you set the controller to. view full answer...
You can use a Hayes Synchronizer # HA81725 in your 2017 Nissan Pathfinder using the plug and play adapter Custom Wiring Adapter for Hayes Brake Controllers - Dual Plug # HA81786-HBC. This will be the plug that goes from the car to the controller. view full answer...
All you need to install the Hayes Syncronizer part # HA81725 in your 2017 Ford F-150 is the custom install harness part # HA81794-HBC which plugs in under the truck dash and you'd be set. view full answer...
Brake controllers don't have an off switch and are designed to go into a sleep mode after 15 minutes or so of inactivity. It sounds like your controller is wired up correctly in your 2009 Chevy Silverado and the controller just hasn't gone to sleep yet. You wouldn't want to just unplug it as that will cause it to lose it's user settings. view full answer...
For your Hayes Syncronizer Trailer Brake Controller # HA81725 on your 2003 GMC pickup with tow package, you will want wiring adapter # HA81780-HBC. This will plug into your junction box beneath your vehicle's dash. That is all you will need as you stated. view full answer...
To install a brake controller in your 2016 Ford Transit Connect tou will need to start with a 4-way (if you do not have one). For that you would want the # C56218.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the view full answer...
To connect the Hayes Syncronizer Trailer Brake Controller # HA81725 on your 2001 Ford F-150 with the factory tow package you will need the Wiring Adapter # HA81783-HBC. This adapter will connect to the controller and has the Ford factory connector on the other end for a plug and play connection. view full answer...
Though the 2012 Chevy Tahoe will have all the wires run for a brake controller, there is no port present under the dash for one to plug directly into. That being said, we do have a plug that will attach to the one on your Hayes Syncronizer # HA81725. The # HA81789-HBC will have bare wires on the end so you can connect to the wires under the dash. view full answer...
The Hayes Syncronizer Trailer Brake Controller -Time Delayed # HA81725 can be used on your 2015 Audi Q7. You will need to hardwire your controller, but I recommend using the wiring adapter # HA81789-HBC to allow you the quick connection so you can use this controller on other vehicles if desired. You will also need to use additional wiring as you pointed out. You will need to ask your authorized dealer for #1J0-972-782 housing (qty. 1) and #000-979-228 wire/terminal assemblies (qty. view full answer...
Of course!
The Hayes Syncronizer Trailer Brake Controller # HA81725 has 4 wires on it that connect to the following functions:
Blue - Brake Signal Output
Black - 12V Power from Battery
White - Ground
Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed)
If you let me know what vehicle that you are installing it on I can check to see if there is a plug-in adapter so that you don't have to cut the connector off of your tow vehicle shuld one exist. view full answer...
Hayes does indeed offer a brake controller wiring adapter that's compatible with the 2008 Toyota Tacoma that's equipped with the factory 7-way trailer connector, part # HA81785-HBC.
I've provided you a photo of what the connector that will plug in under the dash looks like. It's a four pin connector, and you can clearly see the pin-out in the photo I've edited for you.
Your factory connector under the dash will have 5 pins, but the aftermarket wiring adapters and brake controllers view full answer...
The closest thing we have to just the connector of the part # HA81780-HBC would be the part # 3015-S which is the connector with 4 blunt cut wires attached to it that you could splice to your brake controller wiring. view full answer...
You're correct the only difference is the pin out.
If you move the red wire from position D on # HA81780-HBC to position A it will be the same as # HA81781-HBC and work for you. view full answer...
The Hayes brake controller adapter 081780-HBC, or # HA81780-HBC for our part number, fits older GM trucks from 2003 to 2006 so no it's not correct for you. For your 2014 Chevy Silverado you need part # HA81798-HBC. view full answer...
For your 2000 Ford Expedition with Hayes brake controller, you will wan the Custom Wiring Adapter for Hayes Brake Controllers # HA81783-HBC. No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. view full answer...
For your older Hayes Energizer brake controller you can use harness # 3023-P for a 2013 Ram. But you will have to cut off the end that plugs into the controller and the plug on the controller and hardwire them together color for color.
If the connector on the back of your controller is built into the controller and there are no wires showing then you would use # HA81789-HBC and # 3023-P.
It is possible though that your Hayes controller will not work with the 2013 Ram because of the view full answer...
The issue that you're experiencing here is most likely down to your Reese Pilot brake controller not being compatible with Electric Over Hydraulic braking systems, so you will need a new brake controller that is compatible with a Hydrastar # HBA16. For that, I recommend using the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195, which gives you responsive proportional braking control of the Hydrastar actuator and is one of our most popular controllers. view full answer...
Info for these parts were:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Installed by:
Cole B
Installed by:
Andy C
Written by:
Tammy D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.