Part Numbers: RED63RR,3063-P
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight with the included wiring harness. The Elite's user-controlled mode lets you respond to any weather or terrain.
Features:
Specs:
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Elite keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
The Redarc Tow-Pro Elite comes with a unique feature that lets you respond to any terrain or weather you meet while on the road. The user-controlled mode gives you direct control over your trailer's braking so you can have exactly the level of power output you need for any situation - perfect for off-roading or adverse weather conditions. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your vehicle. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow vehicle.
To turn on the user-controlled braking mode, rotate the knob counterclockwise and apply your vehicle's brakes. Push down on the remote knob twice (2 times within 1 second) and release the brakes. The knob will turn green to let you know that the mode has been activated.
Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or having something in your cab that could interfere with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. A universal mounting panel is included to ensure a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Elite. Do not zip-tie the box to wiring or cables that can shift as you drive.
The included adapter connects the main unit to a vehicle-specific Tekonsha wiring harness for an easy plug-and-play installation. There's no splicing or hardwiring. Plug one end of the adapter into the wiring harness and the other into the Tow-Pro Elite and you're done!
For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
The Redarc Tow-Pro Elite brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Elite uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port under the driver's seat.
Features:
To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
The connector is located under the driver's seat. No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1618 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight with the included wiring harness. The Elite's user-controlled mode lets you respond to any weather or terrain. Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port under the driver's seat.In case my first review posts, after an unsuccessful online chat with someone at etrailer, I called them and spoke with a very nice and knowledgeable man (unfortunately I didn’t catch his name). He walked me through the subtle differences between the 2nd generation Sprinter van 7-way factory plug and the 3rd (current) generation van which I have and via telephone I was able to get the Tekonsha adapter harness connected. Thanks etrailer!
This Redarc pro elite looks great in my 23 Subaru ascent; it looks factory. I mounted remote head in front of shifter(very easy to get at)where there was an empty blank.Mounted module to one of column support bracket in spot where it would not interfere with any adjustments of column. By far the longest part was modifying blank with dremel tool to perfectly accept remote head(45 min)(but worth going slowly and taking the tim)This was a completely plug-n-play install.this kit put together by etrailer came with all harnesses so all could be just plugged in; this is why I always use etrailer; I know they have already done the behind the scenes vetting of every product they sell. THANKS ETRAILER
Purchased a 22' R-Pod 192 TT to pull behind my 2019 Benz GLS450 with a factory tow package. It was equipped with the "green brake connector" located by the left kick panel. Contacted etrailer to help choose the correct combination of parts for my vehicle. Was suggested the Redarc EBRH-ACCV3-NA Brake Controller and a TPH-017 Wire Harness. Once products were received, still needed a harness from the green connector to the unit. Wrote to manufacturer in Australia and was told also needed etrailer part number 3066-P. Ordered. Now had everything needed. However, where to mount the switch? One individual with the same Benz mounted it next to the cup holders, but he didn't have a switch for the cold/hot--I did. There was no where else to drill a 1" hole. Got an L-bracket from hardware store and modified it to accommodate the switch. Mounted the main unit securely to the underside of the dash panel and used 3M Dual Lock tape to attach it--no holes to drill. Haven't had an opportunity to tow yet; however, did follow the instructions for the initial "learn" by driving and braking without a trailer attached. Been quite a challenge, but happy with the results and support from manufacturer and etrailer. Happy Camping!
Works great, following instructions and installed the trailer controller. Not all defaclut to install and the hardest thing was getting a 66 Year old kid in position to install it under the dash! I don’t bend as easy as I use too.
This harness fits more years than noted, so long as you have the green factory connector under the driver seat. I thought shipping this item would take several weeks but E-Trailer had it out in just a couple days. A quality product that worked perfectly and was easily installed.
This made connecting my me REDARC Brake Controller easier than hard wiring.
This brake controller was so simple to install with help from etrailer.
It unit operats the electric brakes on my trailer great and I love that I can adjust the braking power from inside my motorhome.
Next level of brake controller
It's always a great day when you can plug and play! No cutting or splicing wire with this kit. Works great!
Hello Alex. I appreciate the follow-up on my brake controller and wiring for my Sprinter van. The wiring was plug and play. It was s little difficult running the wires, but I got it. Again the wiring was plug and play along with the brake controller. I plugged it in and it immediately worked. I haven't towed the trailer with it yet, but will soon. Thanks again for the information on what to buy. You made the project so much easier.
Clean installation
Best brake controller I’ve had. Very easy to use and adjust
Wow!! Our horses love it! Braking is so smooth now with our 45’ horse trailer.. wish we had this 10 years ago
I installed this in a 2023 RAM Promaster 2500 159WB van with factory installed hitch. There wasn't much info on how to do this.
Product was delivered as expected. Very good. The reason for only two stars is that the control knob was broken. No LED lighting which apparently causes the whole unit to not function properly if at all. Customer service is supposed to be sending a replacement on emergency status. I hope this is the case as I’m supposed to picking up a new trailer on Tuesday 8/23/22 and a functional break controller is needed. My rating would be much higher had I not had this issue. Hopefully it gets handled right away and I have the replacement by Monday 8/22/22.
Part of my 22 Bronco hitch installation process. Installed super easy. I watched the Chase Gentry video on [online] before hand, very helpful.
The install was quick and easy looks good and works as advertised excellent product
Perfect set-up to add brake controller to my sprinter van
GOT THE RIGHT PART THANKS TO VEHICLE SPECIFIC LOOKUP. THEN, GOT THAT PART REASONABLY FAST. TIME AND ACCURACY ARE KEY WHEN YOU RUN A REPAIR SHOP LIKE OURS.
worked fine.
Great service !!!!!
Makes life easy
Perfect small option. I mounted it to one of the blanks to the left of the steering wheel in our Ascent. It is super easy to reach while driving and keeps with a clean factory look instead of a visible box with led screen.
Installed this in my 2020 Winnebago View (a 2019 MB Sprinter cassis and cab). I'm using it with a Brake Buddy Stealth controller. Routing it to the dash has a chore, but there are how-to videos on [online]. Most will simply lop off the Tekonsha connector and splice it directly to the pigtail wires on the Stealth controller. I chose, instead, to purchase a mating connector and add THAT to my controller, making the setup compatible with other popular controllers and removable without cutting wires. The Sprinter is pre-wired to "always hot" positive power, which means that you will always have power to the controller and a drain on your battery during storage. You can pull the fuse (in the panel under the driver's seat) or, as I chose to do, wire in a cutoff switch on the dash.
I was concerned that I would not be able to feed this through with both connectors on but found a nice way to lay in the bundle
Mark
6/19/2022
Still working great. Nomproblems
Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Terry
3/1/2024
So glad I purchased. So little effort to install and it allowed the Tekonsha controller to work while pulling a trailer in Alaska. Very easy mod to our 2012 MB Sprinter.