Summer Starts Here - Save up to 70%
Part Numbers: C74VV,C51322
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A simple LED display and a pinch-trigger manual override make this time-delayed brake controller easy to read and easy to use. Installation is quick and simple with no mounting restrictions. Activates brakes with a preset intensity.
Features:
Specs:
Gain control lets you set the maximum amount of power that will be applied to your trailer's brakes, adjusting in increments of 1. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to go as high as you can without the trailer brakes locking up. Typically, the gain is only readjusted when you experience changing road conditions or if the weight of your trailer changes. To get more power to your brakes, press the left-hand upper rocker switch. To decrease the gain, press the lower switch. When you make your adjustment, the gain setting will show on the LED screen for 5 seconds as a series of bars and then go into sleep mode to reduce drain on the battery.
Once you have the gain set, you can fine-tune your braking by adjusting the load control on a scale of 1 to 9. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. Load control can get the braking power to your trailer faster and with more intensity so that it doesn't push your tow vehicle forward. If your vehicle takes too long to come to a stop, increase the setting by pressing the right-hand upper rocker switch. If it stops too abruptly, decrease the setting by pressing the lower switch. You can alter the setting to suit your driving preferences or to improve handling based on changing road conditions or varied trailer loads.
The Venturer comes with a easy-to-reach, pinch-trigger manual override, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push in the trigger. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
The LED display on the Venturer is large and easy to read at a glance. It will show you what setting the brake controller is on as well as give you information for troubleshooting. You can adjust the screen brightness or trigger night mode so it won't glare obnoxiously on your dash. Press the control button to cycle through the different modes, shown as a bar - keeping it simple.
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and the manual override. The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all.
If your vehicle already has a plug-in brake controller wiring harness, just connect the unit to it. Otherwise, you will need to purchase a vehicle-specific wiring harness (sold separately) to plug into. If a harness is unavailable for your vehicle, hardwiring will be necessary.
Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required:
20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
See also etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
The Curt Venturer NEXT comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Venturer. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. Both the amount of braking power (gain) and rate of application (load) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. For most applications, this harness is located beneath the dash, near the center console.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (278 Customer Reviews)
A simple LED display and a pinch-trigger manual override make this time-delayed brake controller easy to read and easy to use. Installation is quick and simple with no mounting restrictions. Activates brakes with a preset intensity. Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.Installed but not used with a trailer yet, easy instruction and appreciate the extra hardware for the installation.
Compact and not intrusive. Decided to use the adhesive tape included and taped under the dashboard L of the steering wheel.
They are the best at what they do. They found the parts I needed and got them to me the next day. I appreciate the dedication to their customers. This product worked for my 1997 Ford F350 with the factory-installed tow package.
Everything was as described. Easy easy installation in 10 minutes. Not the top of the line controller but it's all I need. Very fast shipping as well. Couldn't be more happy with etrailer. I will be purchasing my fifth through etrailer soon!
Great job came on time. Installed easily. Works great. Better still is the service from etrailer. New what I needed for my truck. Deserves repeat business
Slimmer than most of the others. Easy install with the additional pigtail.
Plugged right in to my expeditions factory plug quick easy install.
PERFECT. The etrailer.com employee (Roger R) that assisted me on my phone in order was fast, and efficient. He looked up my truck (2004 f250 diesel 4x4), and assisted me in ordering the exactly correct harness for my application. Plug and play. Thanks.
Installation pics on my Ford F-150
Excellent. Perfect fit, exactly what was needed. Connected the Curt C51110 Brake control to factory wiring. Only thing that could make it better is if it came with someone to plug it in for me and save me 10 seconds.
straight forward install, works as inte nded.
Exactly what I ordered and expected.
Worked perfectly
Wonderful product as well as wonderful customer service
Delivered early. Was just what I wanted.
Almost plug-n-go.The hardest part was where to put the controller !
We purchased our new Ford Explorer with the towing package but the dealership said it didn't come with a trailer brake controller and nothing was made for our SUV so we would have to get an aftermarket controller and have them run the wiring. After looking online I found a video on etrailer.com and it was just as easy as the video to install, the hardest part was finding the Ford plug under the dash, very happy with this product and ready to haul our RV everywhere.
Made installation in a Land Rover Discovery Sport a breeze! Note: This option isn’t listed on either Curt or eTrailer, but it is absolutely an option if you have the factory installed OEM trailer tow package. Your factory tow package must be dealer activated in your vehicle’s software to use the quick connect harness shown here.
Total plug and play. Zero cutting, splicing or tapping required! Fantastic.
TIP: Select your model year and Land Rover Evoque (Shares the same chassis and tow electrics as the Discovery Sport) if you want the right part numbers for your quick connect options.
Works great in my 2000 f250
Made installation a snap. Just mount the break controller, plug one end into the vehicle's factory plug and the other end into the break controller.
Nicholas
8/3/2020
Still working great
Plugged right in to my 2003 Ford F-150, and other end into the Curt Venturer brake controller. Worked great.
Rmt
5/20/2015
so far so good. no issues.
Nice trailer brake. Works as it should.
Haven’t had a chance to install it yet but fast shipping
This is well worth the money. The cord ends appear to be high quality and fit the wiring connectors on the truck and brake controller perfectly. It makes hooking up your new Curt brake controller as easy as plugging in a cord. The only way to make this any easier is to have someone do it for you. The hardest part of the whole installation was finding the factory connector to plug this cord into. Hint: On my 2004 Ford F150, the brake controller connector was just above the factory diagnostic port underneath the dash.
This cable made the job very easy. took 10 minutes to plug in and mount with Curt Venturer Brake Controller. Very inexpensive solution. This is an old vehicle (2001 Expedition) and didn't want to put a lot of money into a brake controller setup. These parts and directions from the website made it quick, easy and inexpensive. I have not towed with the controller yet.
Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike R.
1/28/2015
The products worked great up until about a few weeks ago Thats when I sold the truck where the items were installed. lol. Really though, I very much liked how the products listed and purchased from etrailer.com were easy to find, fit exactly as described, and performed as needed. etrailer.com is always one of the first places I look when searching for items for my new truck.