Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8422,C31023
Retail:$2,319.95
Our Price: $2,054.52
You Save: $265.43
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall
part number: K2AVAL8422
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric winch raises and lowers plow with sturdy, nylon strap
- 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
- In-cab switch serves as a reliable backup to the remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 84" wide x 22" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Winch lift capacity: 3,000 lbs
- Weight: 283 lbs
- 1-Year limited warranty
The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8422 Detail K2 Hitch Mount Snow Plow - 84" Wide x 22" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31023
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31023 Curt Front Mount Trailer Hitch Receiver
31023 Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall - K2AVAL8422
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31023
Average Customer Rating: 4.8 out of 5 stars (102 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Glen 12/10/2021
2003 Chevrolet Silverado 1500
Decent plow for the price.
I installed this DK2 Avalanche on a 2003 GMC Yukon 1500 with a Curt front receiver hitch 31302. If you have a side mount battery, you may need battery bolt extenders (Battery Doctor #30400) to make life easier. That said, the ring terminal connectors on the winch control box will be too small. Get ones that will fit the 3/8 inch stud and 12-10 AWG wire to replace the stock ones.
Manufacturer instructions are not very helpful, but Graz's Garage has a great install video on YouTube. He installed his on a 2020 Chevy Colorado Z71. You can always count on a gearhead from Detroit. eTrailer is awesome at responding to concerns, too, and I'm glad I bought this product from them.
by: Chris03/23/2024
2012 Chevrolet Silverado
Delivery was super fast, instructions and instructional video was excellent. Installed my new part in less than 40 minutes
by: Bill M.03/14/2021
Install went perfectly. It all bolted up just how the instructions said it would. The hardest part was navigating your tools in the tight spaces. Having the deep sockets as suggested is definitely worth it. I was also able to utilize a cordless impact wrench and it helped a ton. This will work great for our bike rack.
by: Brad S06/28/2017
Chevrolet Silverado
Great front receiver hitch for my Chevy Silverado 2500 HD. Everything fit using OE bolts and nuts. Only the plastic trim had to be cut out to fit receiver. I had dealer do it, but would have done it myself when I was younger. etrailer is easy to order from and has good customer service.
by: Steve Miller01/13/2021
My plow was delivered quickly. It took a bit longer to assemble than I thought it would, but it seems pretty heavy duty and looks and works great for my 600' long driveway. It's much better and quicker than plowing with my 4 wheeler and warmer too.
by: Jim 02/13/2024
2013 Chevrolet Silverado
This thing went on our 2013 Silverado 1ton truck without a problem. It did take two of us to hold it in
Place to get the first bolt back in but other than that it’s been flawless
by: Richard B07/08/2013
2013 GMC Sierra
Overall, my experience with etrailer was good. There was an initial delay in shipping, but once I talked to someone, everything went well. The help page was invaluable. The biggest help was the installation video. While there are slight differences between the 2011 GMC and the 2013, the process was the same. I am very pleased with the product and the support. Picture attached.
Richard B.
7/8/2014
After a year, I am still extremely pleased with the hitch. It is solid and provides the solution I needed.
by: A. C.04/18/2018
2012 GMC Sierra
Great product! Super easy to install! This makes my winch twice as versatile. Thanks for a design that leaves the tow hooks in the truck!
by: Brown09/18/2023
Perfect fit for my 2012 GMC 3500. Directions are excellent. It is a tight work space for some of the bolts. I've carried a bike rack with 130 lbs of ebikes for 600 miles so far and no problems.
by: Mitch E.01/14/2020
Great product...I carry bicycles on the front of truck while towing a camper. Can also carry a cargo basket or winch on the front. Love it!
Mitch E.
1/15/2021
Best thing for carrying bikes on front of truck!
by: Terri12/21/2023
It's a great plow.works good the winch is a little slow and the remote is slow to respond but all in all it does what I need it to do.
by: TomW203406/01/2016
2013 Chevrolet Silverado
Excellent fit & function delivered in a reasonable amount of time. Although this shot is at our current campground in NJ, the hitch will be used to park my boat in its hard-to-get-to parking spot. Great job, Etrailer!
Tomw2034
1/23/2018
The hitch has worked out just fine for a variety of uses. I have always been impressed by all the _towing_ related articles purchased from etrailer.
by: Chris z10/06/2019
Installed this hitch this morning 10/06/19. Was going to wait for help as arthritis in hands makes turn wrenches a chore but was bored so went ahead anyhow. This is my second front hitch install , first one on 2018 F-150. Today’s install on 2014 duramax 2500. Today’s install was super simple , used floor jack to hold hitch up in position, you need to remove four bolts on each side , I did try air tools on the 21mm bolts but not powerful enough so used small piece of copper pipe over wrench handle for leverage to loosen, air tools were able to loosen the six 18mm bolts , took me about an hour and a half by myself. The fit of the hitch was absolutely perfect! Had to cut a small piece of the air dam at bottom of bumper, used a hacksaw, very easy. The quality and coating on the hitch is top notch.
by: Owen W05/02/2017
2013 Chevrolet Silverado
Great product, easy to install. Had to cut the air-dam but no other alterations needed. It is a little low but no more so than the front of the truck air dam.
Owen W.
5/2/2018
I use a motorcycle carrier on the front for my 125 scooter while pulling my fifth wheel. It is very secure and the finish has held up fine. I would recommend this purchase.
by: Robert 10/24/2023
I watched the attachment on how to install and video was spot on. The hitch is very well made. I'll enjoy this for years to come. Thank you
by: Jerry B04/14/2017
2013 Chevrolet Silverado
As always, delivery was quick. Hitch was easy to install and works nice. We do a lot of camping and since very few of the travel trailer manufacturers recommend a trailer hitch (some will tell you it voids your warranty), we can carry our bikes up front with this hitch.
Gerard B.
4/14/2018
Excellent! As with every product i have purchased thru etrailer.
by: George 03/21/2024
2013 Chevrolet Silverado
Great product. Easy install.
by: Will 11/12/2022
Plow seems to be of good quality, wont know till I actually use it, how good it is. Seems sturdy enough to do the job, assembly was very straight forward.
My only complaint is etrailer left me dangling for a month with no updates on my order status, even after chatting with one of their customer service people.
I ended up contacting DK2 to get a ship date.
by: John05/10/2020
Super easy, DIY!!! Best price around, delivered in 2 days for free! Would definitely look at etrailer again for any camping/ hauling / trailer needs !
by: Timothy11/14/2021
Fit and finish is great and installation was fairly simple with the right tools.
by: C.09/24/2020
I ordered a front hitch mount for our RV. Product is very heavy duty and priced right! I ordered on a Friday afternoon and had my part by Tuesday, very impressed. Will surely use this company in the future.
C.
9/25/2021
The hitch mount has worked great. Knowing it was machined for pick up trucks, I had no problem installing on a Freightliner chassis. Had to drill a few holes and fabricated a additional brace out of some angle iron for added piece of mind. I have no concerns about the sturdiness and integrity when using this mount.
by: Thomas 11/02/2019
1995 Ford F-250 and F-350
Haven't had to use it yet but arrived when expected and easy to assemble and looks very easy to use. Would definitely recommend buying from etrailer.com
by: Ed C08/05/2019
Installed on my 2012 Silverado 2500HD and it fit perfectly and was very easy to install. Cut my lower cowling to allow the hitch to protrude and it looks awesome! Very glad I purchased your product and would highly recommend to everyone!!
Ed C.
8/6/2020
Still Rocking!I have used this many times and it is still a great product!
by: William07/24/2018
very sturdy product; installation was straight forward exactly as instructions indicated. I had planned to haul motorcycle on this front mount hitch with a carrier meant for a rear receive hitch. While i have not done so yet (lighting issues i need to resolve), this receiver will do the job. I also plan on picking up a receiver mount for a winch which could come in handy. Shipping was fast from etrailer. Overall great product and great service! I got just what I expected from the description.
25
102
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Correct Front Mounted Receiver for 2005 Chevy Silverado
- The # K2AVAL8422 K2 plow attaches to the vehicle using a standard front mounted hitch.
The hitch you need will depend on whether your Silverado is a 1500 or a 1500 HD model. The easy way to differentiate between the two is the hubs. The 1500 has 6 bolt hubs while the 1500HD has 8 bolt hubs.
If you have the 1500 model, I'd recommend the Curt # 31302. If you have the 1500HD model, use the Curt
# 31108.
I've linked to installation videos for both hitches mentioned above.
view full answer... - What is the Receiver Height Requirement for a Detail K2 Snow Plow
- I spoke with my contact at Detail K2 who said that the height of the front hitch receiver on your 2005 Jeep Wrangler needs to be within the range of 13" - 18" which is measured to the bottom of the receiver opening. This is the case for all of their plows, including the Avalanche # K2AVAL8422 that you referenced.
view full answer... - Detail K2 Snowplow for 2" Hitches K2AVAL8422. Will This Work On A Lifted Truck?
- In order to use the Detail K2 Snowplow # K2AVAL8422, your front hitch must be between 13"-18" from the ground, when measured from the bottom of the receiver opening to the ground.
We installed the Curt front hitch # C31018 on a 2012 F250 where everything was stock, and the front hitch was at about 15-1/2". So with a 6" lift and big tires, this snow plow would likely not be effective. You can always measure your hitch to be sure, but your lifted truck will likely not be able to be used
view full answer... - Does Blade Stiffener Have to be Connected for Safe Usage of Detail K2 Hitch Mount Snowplow
- Good question! The blade stiffeners that come with the Detail K2 Snowplow # K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you will be pushing a lot of heavy snow. Otherwise you'll be just fine using it on your 2003 GMC Yukon XL without those connected.
The reason why you're having trouble is because those will connect if the receiver is the same height as the crosstube,
view full answer... - Recommended Light Kit for K2 Detail Snow Plow
- K2 recommends that their # K281488LB2 Halogen High/Low Beam Light Kit with Turn Signals be used with their # K2AVAL8422 Avalanche snowplow. The kit includes the wiring harness, brackets and all necessary installation hardware.
I've linked to a product demonstration video featuring the light kit.
view full answer... - Will Detail K2 Snowplow for 2 Hitches Fit Lifted Truck
- All of the snowplows from Detail K2, including the part #K2AVAL8422 you are looking at, require that the height of the front hitch mount receiver be 13" - 18" from the ground to the bottom of the receiver opening. As long as the front hitch on your K1500 meets that criteria you're good to go!
view full answer... - Recommended Snowplow and Front-Mounted Hitch for 1994 Ford Ranger
- For your 1994 Ford Ranger I recommend the Detail K2 Avalanche Snowplow # K2AVAL8422 which fits in the Curt Front-Mounted Hitch # C31063 (please keep in mind this hitch will not fit Ranger's with a front cross-member or 2WD models built in Canada).
The K2 Avalanche # K2AVAL8422 has a blade which can adjust to be angled to the left or right as well as straight ahead and gets raised or lowered with an electric winch that is operated via remote control so you do not have to leave the cab
view full answer... - Snow Plow and Mount Recommendation for 1994 Jeep Wrangler 4WD
- I'd recommend going with a plow mount for your vehicle over a hitch style mount. On some hitch mount setups we've seen the hitch not be as durable as the mounts that mount to the frame and are specifically for plows so that's what I feel is the better solution.
The Detail K2 Storm Plow part # K2AVAL8422 that you referenced is a great choice, and then for mounts custom fit to your 1994 Jeep Wrangler we have the part # K284115 which would work great.
view full answer... - How to Add Lights to a Detail K2 Snowplow for 2" Hitches
- In order to add lights to the Detail K2 Snowplow for 2" Hitches part # K2AVAL8422 you'll need a light kit like the Halogen High/Low Beam Light Kit with Turn Signals for Detail K2 Snowplows part # K281488LB2. The light kit comes with lights, brackets, and pigtails. The pigtails will be tied into the factory headlights but you'll indeed need to add relays so you don't overdraw the factory headlight circuits.
Unfortunately, we don't have a plug-in relay harness for this so you'll need
view full answer... - How Tight Should Blade Stiffeners Be on Detail K2 Snowplow for 2" Hitches
- I spoke to Detail K2 about the blade stiffeners on the Detail K2 Snowplow for 2" Hitches part # K2AVAL8422 and they informed me that they don't need to have a lot of pressure applied, they should simply be snugged up and then turned an additional rotation or so for support.
view full answer... - Can K2 Detail Avalanche K2AVAL8422 Be Swapped Between 2002 Toyota Tundra and Ford F-350
- The # K2AVAL8422 plow itself isn't vehicle specific, you can install it on any SUV or light truck that has a front hitch available for it.
To install the # K2AVAL8422 on your 2002 Toyota Tundra, you'll need a front mount hitch like # 31180. You will be able to used the plow on both trucks, but unless you want to move all the wiring each time, you'll need an additional winch control box # K2WCB and wireless remote # EWX004-CAD for the second vehicle.
If you'd care to reply with the
view full answer... - Comparing the Detail K2 Avalanche and Detail K2 Rampage II Snowplows for a Dodge Dakota
- For a 2000-2004 Dodge Dakota 4x4, I recommend the Detail K2 Avalanche Snowplow part # K2AVAL8422 with the Curt Front Mount Trailer Hitch Receiver part # 31080 over the Detail K2 Rampage II Snowplow with the Custom Mounting Brackets for Detail K2 Snowplows part # K284134 for two reasons.
The first reason is that the Detail K2 Avalanche has a has a much higher winch capacity of 3,000 lbs than the Detail K2 Rampage II which is only rated at 1,500 lbs. The higher rated the winch, the longer
view full answer... - Can I Use the DK2 Snow Plow # K2AVAL8422 with a 9-Inch Ground Clearance on My 2016 Toyota Tacoma?
- I reached out to my contact at DK2, and he confirmed that you will have enough room to install and operate the Detail K2 Snowplow for 2" Hitches # K2AVAL8422 on your 2016 Toyota Tacoma with a 9-inch ground clearance. As far as the assembly, the snow plow does require assembly upon arrival.
view full answer... - Differences Between Detail K2 and Detail K2 Elite Snow Plows For a 2003 Toyota Tacoma
- Yes, the difference between the Detail K2 Snowplow # K2AVAL8422 and Detail K2 Elite Snowplow # K2AVAL8422ELT is the Elite has the electric actuator over the winch. The Elite also uses a chain connection to the blade while the basic K2 has a strap that is more likely to become damaged. The electric actuator is superior to the winch. It operates faster, smoother and it has a built in clutch that will protect against damage that a winch would cause. The actuator won't be able to lift the blade
view full answer... - Compatible Fitting Front Mounted Hitch For A 2013 GMC Sierra 3500 Denali
- The Curt Front Mount Trailer Hitch Receiver # C31023 is the only compatible fitting front mounted hitch we carry for your 2013 GMC Sierra 3500 Denali. It has a line pull capacity of 9,000lbs, vertical load capacity of 500lbs, and gross trailer weight capacity of 5,000lbs.
view full answer... - Best Way To Move a Heavy Trailer In and Out of Parking Spaces
- I do have an option that will help you move your trailer in and out of parking spaces but both of the front mount trailer hitch receivers we have for your 2013 Chevrolet Silverado 2500HD, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65078 and the Curt Front Mount Trailer Hitch Receiver part # C31023 have a maximum vertical load of 500 lbs. The tongue weight of your trailer will exceed the maximum vertical load rating of either trailer hitch therefore, I cannot recommend using
view full answer... - Front-Mount Hitch Receiver for 2015 GMC Sierra 2500
- The front-mount 2-inch hitch you referenced, Curt # C31023, has been confirmed to fit 2011- through 2014 model years of the GMC Sierra 2500. But for the 2015 model year Sierra 2500 the correct front-mount hitch is Curt # C31071. You can see an installation in a 3500 by clicking on the linked video. All required hardware is included and no drilling is necessary.
view full answer... - Availability of Front-Mount Hitch for 2015 Cheverolet Silverado 2500
- We offer several choices in a front-mount 2-inch hitch receiver for your 2015 Chevrolet Silverado 2500 that can be seen by clicking on the included link. I recommend the Draw-Tite # 65078 since it is the most cost-effective choice. This hitch installs without drilling and it includes the required installation hardware.
view full answer... - Best Front Trailer Hitches for a 2013 Chevy Silverado 2500 Diesel
- Both Curt front hitch # C31023 and Draw-Tite hitch # 65078 will fit your 2013 Chevy Silverado 2500 with the diesel motor. Both companies list the hitches as a fit for all models of the '13 Silverado 2500, among other models. I have linked videos showing example installations of both hitches for you.
view full answer... - Recommended Front Mounted Hitch For A 2014 GMC Sierra 2500 Denali
- For your 2014 GMC 2500 HD Denali I recommend the Curt Front Mount Trailer Hitch Receiver # C31023. I do want to note that Denali models do require quite a bit of fascia trimming to fit with a this or any other front mounted hitch.
This hitch is a simple bolt on installation with all required hardware included. I've attached a video below to help walk you through the installation of this hitch as well.
view full answer... - Can Front-Mount Trailer Hitch Be Installed On 2013 Chevrolet Silverado With Grille Guard Installed
- The front-mount trailer hitches we offer for your 2013 Silverado require removing the tow hooks and then re-installing them after the hitch has been installed.
This same location is used by some of the grille guards we offer so you can check out the attached installation instructions for the Curt Hitch, part # C31023 to see if the grille guard you have would interfere with the hitch installation. Our manufacturers say they have not tested the installation of their hitches with the grille
view full answer... - Front-Mounted Hitch Receivers for 2011 GMC Sierra 1500
- Curt front-mount hitch receiver # C31023 fits only 2500 and 3500 series Sierras but we do have two front hitches for your 2011 GMC Sierra 1500, part # 65052 from Draw-Tite and part # 31322 from Curt.
Both 2-inch hitches are rated for 500-lbs of vertical load (tongue weight) and for a 9000-lb line pull. There are no higher-rated front hitches for your truck.
view full answer... - Correcting Gap Between Hitch Mounting Bracket and Truck Frame for Curt # C31023 Hitch
- Sometimes during shipping hitches will bend slightly. It could have been that the mounting brackets of the Curt hitch part # C31023 got slightly bent and that is why you had a small gap between the bracket and the frame of the truck. Typically we recommend people use an open stairwell or a large vice to apply leverage to the brackets so that they can be bent back.
As long as the metal doesn't crease or paint doesn't flake off during either the initial bend or the bending back the integrity
view full answer... - Comparing the Curt Front Hitch Part # C31023 and Draw-Tite Front Hitch for a 2012 GMC Sierra 2500
- The Curt Front Mount Trailer Hitch Receiver part # C31023 which is a fit for a 2012 GMC Sierra 2500 will hang down further than the other option we have for you which is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65078 excluding Denali. This means that there will be much less trimming required to clear the lower bumper valance in order to make it work.
Please note that the above hitch is only tested on stock vehicle's without a lift or bull bar. You will need to take a
view full answer... - Recommended Front Mount Hitch for a 2011 Chevy Silverado 2500 and 3500
- Yes it will. The Curt Front Mount Trailer Hitch item # C31023 has a 500 lbs vertical load limit which is the same thing as tongue weight on a trailer hitch. This hitch has plenty of capacity for your 390 lbs scooter and 60 lbs carrier. You will want to verify with Chevy what your Silverado's capacity is and go off of that number if it is lower then 500 lbs.
The Curt Front Mount Trailer Hitch item # C31023 is confirmed to fit both the 2500 and 3500 models of the 2011 Chevy Silverado.
view full answer... - Front Mount Hitch for a Snow Plow on a 2013 Chevrolet Silverado 1500 LT
- I would be happy to clarify. The Curt Front Mount Trailer Hitch Receiver item # C31023 fits a 2013 Chevrolet Silverado 2500 or 3500. This front mount hitch sits below the front bumper. I have attached an installation video.
For a 2013 Chevrolet Silverado 1500 LT you will want the Curt Front Mount Trailer Hitch Receiver item # 31322. This one mounts below the front bumper as well. I have also linked an installation video.
view full answer... - Low Hanging Front Mount Hitch Recommendation for a 2013 GMC Sierra 2500HD
- You can use a high low adapter like part # RM-048-8 to lower the hitch opening but you should note that it will lower the capacity of the hitch by 50 percent.
I attached a picture of the Curt Hitch part # C31023 installed and you can see it sits a bit closer to the ground. This might be your best option since it wouldn't require the use of the high low adapter.
view full answer... - Will Curt Front Mount Trailer Hitch 31023 Fit a 2011 GMC Sierra Denali 2500
- The Curt front mount trailer hitch # C31023 does not exclude the Denali models of the 2011 GMC Sierra. However, because of the different front fascia on Denali models you may need to do some extensive trimming to install the hitch. On non-Denali models you would only need to trim a small area, see the instructions I have linked, but on a Denali model, more of the fascia structure would require trimming to fit. I have also included a link to a video showing a typical installation for you.
view full answer... - Recommended Front Mount Hitch for a 2011 Chevy Silverado 3500 HD 4WD
- Yes, the Curt Front Mount Trailer Hitch Receiver item # C31023 will fit your 2011 Chevy Silverado 3500HD 4WD. This front mounted hitch bolts to your Silverado 3500 with included hardware.
I have linked an installation video below and a picture that will show you what this hitch looks like installed.
view full answer... - Front Hitch and Bike Rack for Front of 2012 Chevy Silverado 3500
- For a front hitch for your 2012 Chevy Silverado 3500 the Curt hitch part # C31023 is a confirmed fit and would work great for mounting a bike rack like the Swagman XC2 part # S64650 that you referenced. In this price range for a bike rack I like to recommend the Hollywood Racks # HR200Z as it costs about the same and is much more stable on the road.
If you check out the test course videos I attached you'll see how they both compare.
view full answer... - Will the Curt Front Mount Trailer hitch 31023 Fit a 2014 GMC Sierra 2500HD Denali
- I spoke with my contact at Curt who told me that front mount hitch # C31023 will fit the 2014 GMC Sierra Denali but because of the differences in the front fascia/bumper and air dam there may be some trimming required to get the hitch to fit. Once installed the receiver will exit below the front license plate. I have linked a video showing a typical installation for you.
view full answer... - Better Visability When Backing Trailer With Front Mounted Hitch on 2012 Chevrolet Silverado
- Installing a front mounted hitch like Curt Front Hitch for the 2012 Silverado, part # C31023 on your Silverado would provide more visability when moving a trailer into position. It has a 2 x 2 inch receiver opening, and can also accomodate other accessories like winches, snowplow, and cargo carriers. This hitch has a line pull capacity of 9000 lbs and a tongue weight capacity of 500 lbs. This hitch has easy, bolt-on installation and requires no welding for installation, but does require
view full answer... - Front Hitch Recommendation for 2011 Chevy Silverado 2500HD that Allows Tow Hooks to be Retained
- The Curt front hitch part # C31023 that you referenced does allow you to retain the front tow hooks of your 2011 Chevy Silverado 2500HD so it would be the better choice.
view full answer... - Best Front Receiver Hitch for 2011 Chevrolet Silverado 2500
- My best recommendation for a front receiver hitch for your 2011 Chevrolet Silverado HD is the Curt Front Hitch # C31023. This will go on behind your bumper. You may need to trim the bumper fascia around the bottom a little bit depending on how the hitch sits, but just enough to make room around the hitch receiver tube.
Once you have that installed, we also have other accessories you may want to use with it like a winch mounting plate # BDW20011.
view full answer...
Info for these parts were:
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Test Fit:
Rick A
Test Fit:
Randy B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 3500 Accessories
Product Experts Available Now!
Call 1-800-940-8924
Bill M.
3/15/2022
Love it. It is secure and discrete and is great for a bike rack. Be cautious of what you hang up front, bikes or other types of racks might disrupt airflow into the radiator, which was expected, just keep an eye on temperature. The bolt up was secure and relatively easy.