iN-Command

Hi James, If the TPMS use Bluetooth then yes, it will work when out of service area. For example, the TireMinder Smart TPMS for RVs - Signal Booster - 4 Tire Sensors #TPMS-APP-4 will still give you both an audible and visual alert. I have added a…

Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity. With trailer tires you always want to have them inflated to their…

I reached out to the manufacturer, ASA Electronics, and they stated they didn't have an exact range determined without the repeater and that you should always use repeater included with the #NCTP100 for trailer use. If you were just installing…

For a smaller, single axle travel trailer, the #NCTP1002 iN-Command system would work perfectly. The kit provides 2 sensors and would use your smart phone as the control module. The #NCTP100 provide a repeater and 4 sensors, and would be a better…

The best way to help reduce sag when towing your travel trailer with your 2017 Ram 1500 Bighorn having a lift is with a weight distribution hitch. Personally I fee the Equal-i-zer hitch systems are the best option as they are made in the USA and have…

the iN-Command TPMS for RVs, Trailers, and Vehicles #NCTP100 will only pair to the iN-Command system. You will not be able to pair your tire sensors for your 2023 Chevrolet 3500 to the system, or pair the iN-Command tire sensors to your factory…

The JRVCS1CM iN-Command system you have is compatible with TPMS systems but the #NCTP1002 is only the tire pressure monitor sensors and are designed to work as an add on to the iN-Command RV Tire Pressure Monitoring System #NCTP100. In order to have…

You are not missing anything and you are correct. The Reese Weight Distribution Shank #RP69FR will provide 8.75" of drop. I have included a picture that shows the drop dimensions between each hole.

You want to set the ball height adjustment so that the trailer is being towed as level as possible. Sometimes with weight distribution systems the included shank does not provide enough drop to allow this so then you would need to get a shank that…

To find the correct rise or drop what you need to measure is the from the ground to the top of your hitch receiver opening, which it sounds like you have done and got 25-1/2". You also need to measure from the ground to the bottom of the…

I do not recommend cutting your weight distribution shank. We do have an option for one that has a 9" drop it is the Equal-i-zer Wt Distribution Shank item #EQ90-02-4400. This shank is closer to the lower end of in-between. I have linked a…

It sounds like what you are saying is that when you upgraded to the bigger 2019 Ram 2500 that your receiver was too high on the taller truck and now when you connect to your 2018 Keystone Cougar Trailer the coupler is too low. It sounds like you need…