2008 Jeep Wrangler Unlimited Jeep Hardware

The Blue Ox High Low Adapter part #BLU53XR was designed only for use in flat towing setups where there isn't tongue weight present so its not rated for that. This is solid shank designed to fit the heavy duty 2-1/2 inch hitch size so I…

No you can not use the long ends to mount the platform. The platform #RR82TB can only be mounted to the legs using the underside crossbars. There is no other spot on the platform that can accept legs.

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper…

The Saris Swing Away Hitch Extender for Bike Racks #SAR36VR has an overall capacity of 250lbs (rack and bikes) so it could technically accommodate two 85lb e-bikes as well as a rack, but the bike racks confirmed to be compatible with this extender…

Since you will be at a campground the best way for you to move an enclosed motorcycle trailer is a dolly and a great option is the Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 because it is a combination jack and dolly that has rubber…

The Roadmaster Hitch Mounted Spare Tire Carrier part #RM-195225 is the best option we offer for a hitch mounted spare tire carrier. This carrier allows you to swing the arm down which not only allows for certain hatches to be opened but also make…

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

The SumoSprings Solo Custom Helper Springs for Jeep - Front Axle - Off-Road - 2" Lift Spacers #SSF-403-54 has a height of 3.800 inches. The #SSR-401-47 has this same height with a 1000 lb capacity , where the #SSR-405-47 has a height of…

We have a customer who installed the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13432 to a 2016 Jeep Wrangler Unlimited Backcountry bumper. I've attached a photo to show that install. It is the same exact bolt pattern…

I spoke with Yakima and they informed me that the Yakima BigCatch Kayak Carrier w/ Tie-Downs part #Y04091 will fit on the lower level of the Yakima EasyRider Double Decker Trailer part #Y08129 and will then allow you to secure your Hobie Tandem…

I would be happy to help! For your 2020 Winnebago Adventurer 29B with a GVWR of 18000lbs I recommend starting with a rear anti-sway bar #RM-1139-146 which will do a great job at eliminating body roll and sway, giving you a more enjoyable driving…

The Rampage Mini-Van Center Console #RA39923 is only available in the charcoal color.