Features:
Strengthen the factory tailgate on your Jeep and carry an oversized spare tire. The frame and heavy-duty tailgate hinges reinforce the tailgate to support extra weight. Spare tire mount works with tires up to 40" in diameter.
More Information >Jeep Spare Tire Carrier Specs:
Features:
This heavy-duty spare tire mount upgrades your Jeep's factory carrier, allowing you to carry an oversized spare. Works with tires up to 40" in diameter. Adjusts to keep your third brake light visible.
More Information >Jeep Spare Tire Carrier Specs:
Features:
Modular bumper with spare tire carrier replaces your factory Jeep bumper and carrier. Tire carrier swings out with tailgate with one motion. Holds tires up to 37" in diameter. Steel construction with matte black powder coat.
More Information >Features:
Strengthen your factory tailgate on your Jeep to handle an oversized spare tire. Frame reinforces the tailgate to support extra weight. Works with factory and aftermarket spare tire carriers. Requires MORryde heavy-duty tailgate hinges to install.
More Information >Videos
for Jeep Spare Tire Carrier
Help Articles
for Jeep Spare Tire Carrier
Expert Answers
for Jeep Spare Tire Carrier
Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler…
view full answer...There are two possible options for you. The Dexstar Dual Wheel #AM20790 which is the 16" x 6" size you need with the 8 on 6-1/2" bolt pattern, uses flange nuts instead of standard lug nuts, and would work with…
view full answer...We have a number of spare tire carriers available from Roadmaster, Demco, and other manufacturers; However, Blue Ox does not build an option. If you are needing a spare tire carrier for your 2017 Jayco Redhawk Motorhome, may I suggest the…
view full answer...It depends on what 5th wheel landing gear you have. For example; the Lippert Landing Gear part #LC333966 is rated for 6,000 lbs. It can be used with a trailer that weighs more than 6,000 lbs because it is only supporting part of that load - the…
view full answer...For the 6-point Level-Up System by Lippert, I made a call to the manufacturer to ensure you would receive correct information. Lippert said that when you bolt the footpads to the jacks, you need to torque them to 132 ft-lb. They said to make sure…
view full answer...We do have a few different options for you! If you are wanting an exact replacement then it looks like you currently have the Command LED Courtesy Light #328-002-04W. For a few different styles we have the Optronics #ILL85CB and #ILL86CB which are…
view full answer...In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've…
view full answer...The Lionshead Steel Dual Wheel, 4.77" Pilot - Silver, Item #LHHA420 is a 16" x 6" wheel with an 8 on 6-1/2 bolt pattern, so as long as your Class C motorhome wheels have the same bolt pattern and are the same 16" x…
view full answer...I reached out to Roadmaster who said the plate is 5-1/4" from the inside of the upright on the Spare Tire Carrier #RM-2000-7. Your 235/65R18 tire has a width of 9.3" and the 51mm offset is approximately 2" off the center…
view full answer...We do carry the in bed 5th wheel rails separate from the lower brackets for your 2020 Ford F-250. I do recommend matching the manufacturer for lower brackets to ensure you do not have any fitment issues. Here is a list of the different rails we…
view full answer...The exact replacement foot plate for the Level Up system you have is not available as a replacement. But you could use #LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI