Features:
Upgrade the factory hinges on your Jeep with these heavy-duty tailgate hinges. Built to last, these hinges provide additional support for MORryde tailgate accessories. Grease zerk on each hinge helps keep the tailgate operating smoothly.
More Information >Features:
This RotopaX mount lets you carry fuel, water, and more when you're off the beaten path. Provides a mounting area for RotopaX brackets. Installs on MORryde heavy duty tailgate hinges for Jeep Wrangler TJ (sold separately).
More Information >Videos
for Jeep Storage
Help Articles
for Jeep Storage
Expert Answers
for Jeep Storage
Since Valley went out of business there are no direct replacement parts that are available but a repair kit like the Curt #C25194 for 2" Curt Couplers may be compatible. What I recommend doing is replace your coupler completely as…
view full answer...For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the…
view full answer...The Yakima EXO Swing Away Enclosed Cargo Carrier for 2" Trailer Hitch #Y62VR may or may not cover your tail lights and license plate. If it does, you can add the License Plate and Tail Light Relocation Kit for Yakima EXO System #Y74VR This…
view full answer...I do have an option for you but I cannot advise you combine two hitch adapters together like the Roadmaster Hitch Extender part #RM-071 and the Roadmaster Dual Hitch Receiver Adapter part #RM-077-4 as this would be very unsafe. However, if you need…
view full answer...The Yakima EasyRider Double Decker Trailer #Y08129 is pretty well setup for off-road situations like you mentioned. It comes with shocks and decently aggressive tread tires so that it would handle moderate off-road scenarios like what most find…
view full answer...Yakima does not recommend backing their Rack and Roll trailers like the #Y08107 you mentioned into water as the bearings aren't sealed and neither are the electrical connections. Your best option would be to back it right up to the waters…
view full answer...Both the LED Trailer Mini Clearance #MCL10AKB and Uni-Lite LED Clearance #MCL11RKB will require an 11/16" hole for mounting. These both use the same Grommet #A11GB.
view full answer...The best way to improve the handling and stability of your 2011 E-450 motorhome is going to be with a rear sway bar upgrade like the Hellwig part #HE78RR. This will make the biggest difference and honestly should be the first thing anyone with a…
view full answer...I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…
view full answer...In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…
view full answer...We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video which…
view full answer...The Curt trailer hitch #C13119 weighs about 30 pounds or so. Its affect on gas mileage would basically be non-existent. You would never notice a change. The way a person drives would have more of an effect than adding a little weight to the vehicle…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.
Robert
Bloomington, IL