RV Jack Pads Specs:
Features:
...chart below) with Lippert leveling systems and (4) 11-1/2" or 12" round jack feet Dimensions: 13-3/4" long x 13-3/4" wide x 2-1/4" tall 2-Year limited war...
More Information >RV Jack Pads Specs:
Features:
...chart below) with HWH or Valid leveling systems and (2) 10" diameter and (2) 11-1/2" diameter jack feet Dimensions: 10" Pads: 11-3/4" long x 11-3/4" wide...
More Information >RV Jack Pads Specs:
Features:
...chart below) with Equalizer leveling systems and (2) 10" octagonal and (2) 11-1/2" or 12" round jack feet Dimensions: 10" Octagonal pads: 13-1/4" long x
RV Jack Pads Specs:
Features:
...chart below) with HWH or Valid leveling systems and (4) 11-1/2" or 12" round jack feet Dimensions: 13-3/4" long x 13-3/4" wide x 2-1/4" tall 2-Yea...
More Information >RV Jack Pads Specs:
Features:
...chart below) with Equalizer leveling systems (4) 11-1/2" or 12" round jack feet Dimensions: 13-3/4" long x 13-3/4" wide x 2-1/4" tall 2-Year limited war...
More Information >RV Jack Pads Specs:
Features:
...chart below) with HWH or Valid leveling systems (2) 8" diameter and (2) 11-1/2" diameter jack feet Dimensions: 8" Pads: 10" long x 10" wide x 2 " t...
More Information >RV Jack Pads Specs:
Features:
...and use a screwdriver to stretch the rubber as necessary No need to remove and replace pads or carry other jack pads or blocks around with you Made in the USA Specs: Application: 11-1/2" round jack
More Information >
Videos
for RV Jack Pads
Help Articles
for RV Jack Pads
Expert Answers
for RV Jack Pads
If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w…
view full answer...I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack #LC298707 and found that the 6" square SnapPads were…
view full answer...SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you…
view full answer...You are correct that the kit part number 70161 that you mentioned from SnapPad is our #SP24FR4 so this would be the kit you'd need.
view full answer...If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck…
view full answer...Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to…
view full answer...Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x…
view full answer...Personally I prefer the SnapPad XTRA Jack Pads #SP54FR4 over the Stromberg Carlson #SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a…
view full answer...Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs,…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without…
view full answer...There's unfortunately not a guide to tell us the sizing of your trailer's jack pads so…
view full answer...The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to…
view full answer...