RV Jack Pads Specs:
Features:
...Replaces 6 pads for your SnapPad jack stand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Total...
More Information >RV Jack Pads Specs:
Features:
...Replaces 4 pads for your SnapPad jack stand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Quantity: 4...
More Information >RV Jack Pads Specs:
Features:
...tongue jacks, standard and 9" landing gear, and scissor jacks Solid, heavy-duty rubber construction won't crack or break Resistant to UV rays, water, mold, and corrosion Provides reliable...
More Information >RV Jack Pads Specs:
Features:
...tongue jacks, standard and 9" landing gear, and scissor jacks Solid, heavy-duty rubber construction won't crack or break Resistant to UV rays, water, mold, and corrosion Provides reliable...
More Information >RV Jack Pads Specs:
Features:
...tongue jacks, standard and 9" landing gear, and scissor jacks Solid, heavy-duty rubber construction won't crack or break Resistant to UV rays, water, mold, and corrosion Provides reliable...
More Information >RV Jack Pads Specs:
Features:
...tongue jacks, standard landing gear, and scissor jacks Solid, heavy-duty rubber won't crack or break Resistant to UV rays, water, mold, and corrosion Provides reliable support on any surface Built...
More Information >Videos
for RV Jack Pads
Help Articles
for RV Jack Pads
Expert Answers
for RV Jack Pads
I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack #LC298707 and found that the 6" square SnapPads were a fit. If your 2022 Forest River Vibe travel…
view full answer...SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you won't have to keep replacing them…
view full answer...You are correct that the kit part number 70161 that you mentioned from SnapPad is our #SP24FR4 so this would be the kit you'd need.
view full answer...If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck…
view full answer...If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet #SN76FR will work great. If…
view full answer...Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to…
view full answer...Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x 1-1/2" fine thread grade five bolt. I then…
view full answer...Personally I prefer the SnapPad XTRA Jack Pads #SP54FR4 over the Stromberg Carlson #SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a 9" round…
view full answer...Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs…
view full answer...Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit…
view full answer...There's unfortunately not a guide to tell us the sizing of your trailer's jack pads so you'll want to measure and note the shape of each pad. I've run…
view full answer...The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4"…
view full answer...