2000 Chinook Chinook Motorhome RV Jack Pads

Hello Jason, Thanks for writing in. For your 2026 Forest River R-Pod 192, you'll need the SnapPad SnapJack SJ RV Scissor Jack Pads #SN32FR for the four scissor stabilizer jacks and the SnapPad TJ Trailer Tongue Jack Pad #SN77VR for the rounded…

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

Hey Robert! That Stromberg Carlson foot won't work but we actually do have the replacement SnapPad for your leveling system. The Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot #SP54FR is what you need. It works with…

Hey Robert! The SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet - Qty 4 #SN58FR are made specifically for HWH and Atwood 10" diameter foot pads, so I'd like to make sure that the leveling system…

Hi Michael, I'd be happy to help with that. By the way, I love the Flying Cloud. The etrailer Electric Trailer Jack, Part #e33KV, is exactly what you need for your Airstream Flying Cloud 23FB. It has a 5,000 pound lift capacity, which gives you…

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad #SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under…

They sure will Eric! The SnapPad SnapJack QD RV Stabilizer Jack Pads item #SN44VR are exactly what you need for the PSX2 stabilizer jacks. They're going to bolt right up to where the existing jack foot is and stay securely attached with the…

Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

Hello Luc, thanks for reaching out. The SnapPad #SN44VR kit will not fit the HappiJac jacks used on a Lance 1172 truck camper. The #SN44VR is designed for Lippert PSX style trailer stabilizer jacks with 5-1/2 inch square feet, not the round corner…

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…