2009 Ford Trailer Hitch

Change Make

Select Vehicle Model

--Select Model-- Crown Victoria Edge Escape Explorer F-150 F-250 and F-350 Super Duty F-350, 450, and 550 Cab and Chassis F-450 Super Duty F-650 and F-750 Flex Focus Fusion Mustang Ranger Taurus Taurus X Van

   Go

Available Models for 2009 Ford Trailer Hitch

Crown Victoria

Edge

Escape

Explorer

F-150

F-250 and F-350 Super Duty

F-350, 450, and 550 Cab and Chassis

F-450 Super Duty

F-650 and F-750

Flex

Focus

Fusion

Mustang

Ranger

Taurus

Taurus X

Van

Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.

Hitch Accessories

Ball Mounts

Custom Fit Vehicle Wiring

Hitch Adapters

Hitch Extenders

Hitch Balls

Pintle Hitches

Trailer Wiring and Adapters

More Trailer Hitches

Base Plate for Tow Bar

Weight Distribution System

RV Hitches

Front Mount Receivers

Fifth Wheel Hitches

Gooseneck Hitches

ATV Trailer Hitches

Trailer Hitch Manufacturers

Draw-Tite Hitches

Hidden Hitch Hitches

Reese Hitches

Torklift Hitches

Curt Hitches

2009 Ford Accessories

Towing

2009 Ford Trailer Hitch

2009 Ford Trailer Wiring

2009 Ford Brake Controller

2009 Ford Fifth Wheel Hitch

2009 Ford Gooseneck Hitch

2009 Ford Front Mount Hitch

2009 Ford Towing Mirrors

2009 Ford Base Plate for Tow Bar

2009 Ford Vehicle Tow Bar Brake System

2009 Ford Vehicle Tow Bar Wiring

Cargo Control

2009 Ford Roof Rack

2009 Ford Tool Box

2009 Ford Ladder Rack

2009 Ford Tailgate

2009 Ford Truck Bed Extender

2009 Ford Trunk Bike Rack

2009 Ford Vehicle Cargo Control

2009 Ford Headache Rack

2009 Ford Truck Bed Sliding Tray

2009 Ford Camper Tie-Downs

2009 Ford Truck Bed Bike Rack

Performance Accessories

2009 Ford Cold Air Intake

2009 Ford Air Filter

2009 Ford Exhaust

2009 Ford Suspension Enhancement

2009 Ford Transmission Cooler

2009 Ford Performance Chip Tuners

2009 Ford Vehicle Lights

2009 Ford Tire Chains

2009 Ford Throttle Body Spacer

2009 Ford Fluid Filters

2009 Ford Vehicle Sway Bars

2009 Ford Catalytic Converters

2009 Ford Vehicle Snow Plows

2009 Ford Vehicle Engine Heaters

2009 Ford Off Road Lights

2009 Ford Radiator Fan

2009 Ford Cabin Air Filter

Vehicle Trim

2009 Ford Floor Mats

2009 Ford Tonneau Cover

2009 Ford Nerf Bars - Running Boards

2009 Ford Trim Kits

2009 Ford Vehicle Covers

2009 Ford Grille

2009 Ford Grille Guard

2009 Ford Bug Shield

2009 Ford Side Window Vents

2009 Ford Truck Bed Mat

2009 Ford Bumpers

2009 Ford Mud Flaps

2009 Ford Lamp Guards

2009 Ford Van Cargo Mat

2009 Ford Truck Tailgate Lock

2009 Ford Truck Bed Rail Caps

2009 Ford Truck Bed Tailgate Assist

2009 Ford Vehicle Tent

2009 Ford Vehicle Seat Covers

2009 Ford Replacement Mirrors

2009 Ford Windshield Wiper Blades

2009 Ford Wheel Liners

2009 Ford Wheel Well Guards

2009 Ford Battery Box Relocation

2009 Ford Windshield Covers

2009 Ford Vehicle Air Mattress

2009 Ford Truck Bed Camera

2009 Ford Tailgate Lift

2009 Ford Questions and Answers

• Lippert Solid Step Manual RV Steps for 24-Inch Wide Doorway
  
• Based on your doorway width and your ground-to-threshold dimension you can use the Lippert Solid Step Manual Fold-Down Step # LC678040. This works for doorways that are 24- to 26-inches wide and that have a height of 27- to 36-inches. Weight capacity is 400-lbs. You will need to supply your own mounting hardware or re-use the original hardware.
  view full answer...


• Recommended 5th Wheel To Gooseneck Hitch Adapter on Short Bed Truck
  
• It is not recommended to use an offset ball and another adapter for your 5th wheel. I recommend the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset - 12" to 16" Tall # CAB-C5GX1216. This will give you a 7-1/2 inch offset. A better option that will give you more turning clearance and a more stable connection is to use the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3400. This sliding 5th wheel hitch fits in your B&W gooseneck and utilizes...
  view full answer...


• 5th Wheel Mounting Brackets That Work with Airbags on a 2009 Ford F-250
  
• I do have a way that may allow you to mount a set of 5th wheel base rails on your 2009 Ford F-350 while using your current airbag setup, however the Curt Custom Fifth Wheel Installation Kit for Ford part # C16448-204 will not work as the custom brackets included in this kit attach in the same location as your airbags. In order to mount a set of base rails on your vehicle while using your current airbags, you will want to use a universal installation kit like the Reese Universal Base...
  view full answer...


• Recommended Brake Controller and Wiring for 2009 Ford Ranger XLT 4x4
  
• For the upgrade from a 4-way trailer connection to a 7-way with brake controller, I recommend the # ETBC7 for your 2009 Ford Ranger XLT 4x4. This Universal Brake controller wiring kit will allow you to use the current 4-way an then give you the wiring, circuit breakers, and connectors needed to upgrade your system. Then you just need to install a brake controller. For a brake controller, I recommend the Tekonsha Prodigy P3 # 90195. This controller uses proportional braking, so it...
  view full answer...


• Recommended Wiring Adapter To Isolate Brake Signal From Combined Wiring With Turn Signal
  
• The Pacer Performance 3rd Brake Light Logic Module # PP20-702 you referenced is for a single LED light. It isolates the brake signal from the turn signal on combined wires. It works in the same way as the Vehicle to Vehicle Tail Light Converter # 118158 which is confirmed to work for your incandescent light bulb function as well as LED function.
  view full answer...


• Replacement Hardware and Brackets for Firestone Ride-Rite Air Helper Springs # F2525
  
• We do have all of the hardware and brackets available that come with the Firestone Ride-Rite Air Helper Springs # F2525. Here is the complete list, you will just have to pick what exactly you are needing: Bail Clamp - # F2135823410 Frame Hole Bracket - # F5660 Upper Bracket - # F5699 Frame Bracket-Driver's Side - # F5701 Frame Bracket-Passenger's Side - # F5700 Lower Bracket-Driver's Side - # F5702 Lower Bracket-Passenger's Side - # F5703 Hardware Kit - # FA21-760-2525
  view full answer...


• Trailer Hitch and 7-Way Wiring Recommendation for 2009 Ford E-350
  
• The Draw Tite hitch # 41945 thtat you referenced is the correct hitch for your 2009 Ford E-350. For trailer wiring you'd need to start with a 4-way like the # 118551 which does require a wire ran to the vehicle battery. Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and others need to have the power...
  view full answer...


• Trailer Hitch that Fits 2009 Ford Fusion
  
• We have the Draw Tite trailer hitch # 24775 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especialy on the hills you describe. If you really wanted to do it though I would recommend checking...
  view full answer...


• Recommended SuperSprings SumoSprings for 2009 Tiffin on Ford F53 Chassis
  
• The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle # SSF-170-40-2 are a confirmed fit and the two piece design does allow for the full suspension travel to allow your vehicle suspension to work to it's best capacity without limitation, while also enhancing the load support and stability. These are rated for motorhomes from 16,000 to 26,000 lbs. The front springs you mentioned are not found on the manufacturers site. These two piece springs are the only confirmed fit...
  view full answer...


• Torklift Tie Downs # TLF2012 and TLF3004 for Ford F-250
  
• The Torklift Tie Downs part # TLF3004 and # TLF2012 are sold as complete kits and do not have replacement parts sold for them. With either kit though you'll be able to use the Fast Guns so you wouldn't be replacing everything that you have currently.
  view full answer...


• Weight Distribution for 2009 Ford F-150 and 3500 Pound Jayco Trailer
  
• Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW Item # EQ37060ET is rated for 200 to 600 pounds of total tongue weight. Total tongue weight is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. If your total tongue weight is between 200 and 600 pounds then this system will work for you. This system has built-in sway control...
  view full answer...


• How to Fill Fresh Water Tank on Trailer
  
• The manufacturer does not list an inner diameter for the Valterra Drinking Water Hose part # W01-0011 but I went out to our warehouse and measured the best I could for you and I came up with about 1/2" diameter. The drinking water hose has a male and female garden hose fitting on either end. This should be exactly what you need to fill the fresh water tank on your trailer.
  view full answer...


• 4-Pole Trailer Wiring Harness for 2009 Ford Edge
  
• We do offer 4-pole trailer wiring harness kits for your 2009 Ford Edge that will provide stop/turn/tail light functions to your trailer's lights. All available items are shown on the linked page. Each of these installs in the same way by 1) plugging in at your Edge taillights and by 2) routing one single 12V power wire up to the engine compartment for connection to the battery. This is the only type of aftermarket harness offered for your car. Of the three I recommend the Tekonsha kit...
  view full answer...


• Tekonsha Electric Brake Controller and Wiring Adapter for 2009 Jayco Greyhawk
  
• From my research your 2009 Jayco Greyhawk is on a Ford E-450 chassis. Which means the # 3034-P wiring adapter will work for your RV. The adapter will work with a variety of Tekonsha brake controllers. Of them I recommend the Prodigy P3 # 90195. It's the top of the line because of the LCD and storable settings. It's also one of the easiest to use and most reliable.
  view full answer...


• Will Curt Echo Brake Controller Work with 2009 Ford F-150
  
• The Curt Echo Trailer Brake Controller # C51180 referenced in your question is really a universal product that just needs a 7-Way connector with an active 12V pin on the tow vehicle for perfect operation. As long as your 2009 Ford F-150 is equipped with a 7-Way and that 12V circuit is active this brake controller will work great. I really like this controller because of how simple it is to install and use. After plugging the unit into the 7-Way on your truck you simply need to pair...
  view full answer...


• Parts Needed to Install Brake Controller On 2009 Ford Van w/ Factory 4-Pole Trailer Connector
  
• Given you description, I'm guessing your van was originally equipped with the factory 4-pole trailer connector that provides lighting functions only. You'll begin by choosing a brake controller. You can't go wrong with the Tekonsha Prodigy P2, part # 90885. You'll also need the # 3034-P brake controller wiring adapter. The adapter plugs in to the connector located behind the small change pocket in the dash, but the brake output circuit is NOT ran to the rear of the vehicle, so you'll...
  view full answer...


• End Caps for RV 4 Inch x 4 Inch Square Bumper
  
• The Revolution RV Sewer Hose Kit w/ Swivel Fittings and Storage Caps part # CAM39625 does not come with the end caps for your RV's 4" x 4" square bumper. The end caps that are included are for the hose only. If you need the end caps for your RV's 4" x 4" square bumper then you can obtain them using the Camco Vented RV Bumper Cap w/ Tether part # CAM40324.
  view full answer...


• Does the Draw-Tite Hitch # 75751 fit under the Spare of a 2009 Ford Escape
  
• The Draw-Tite hitch # 75751 that you referenced will fit underneath the factory hitch of your 2009 Ford Escape. To see how it attaches to the frame of your vehicle check out the picture and installation instructions I attached for you. This hitch will work with your factory spare as well.
  view full answer...


• 7-Way Recommendation for a 2009 Ford E-350 Van
  
• The connectors that the # 118261 is designed to fit should look like the picture that I attached. It is possible that you haven't found the correct harnesses on your 2009 Ford E-350 Van. The correct harness will be under the rear of the van inside the driver's side frame rail. See attached pic. I attached a link to our returns policy page as well.
  view full answer...


• How to Determine Correct Weight Distribution System for 2015 R-Pod 178
  
• In order to choose the best weight distribution system you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go 2015 R-Pod 178 plus the weight of any cargo behind the rear axle of your 2009 Ford F-150. The tongue weight is typically between 10% and 15% of your trailer's GVWR but you'll want to verify it by using a scale such as the HaulGauge Mobile Tongue Weight and Payload Scale # HG103 or by using one of the methods...
  view full answer...


• Defining Travel on Electric Ground Control Automatic 5-Point Travel Trailer Leveling System
  
• In regards to the amount of travel that the rear jacks of the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 offer, 12 inches is the amount each jack can extend to offer to level your trailer. The jacks are not going to lift the trailer, they will stabilize and level it and the distance from where the jacks are mounted under your trailer to the ground cannot be more than 12 inches. As far as your second question there is not a kit similar to this...
  view full answer...


• Compatibility of Reese Goose Box Replacement King Pin with Gooseneck Hitch
  
• A Reese Goose Box replacement 5th wheel pin box, such as # RP94720 that replaces a Lippert 1621 pin box, will fit on any 2-5/16-inch goose neck ball. The Goose Box adapts a 5th wheel trailer to a goose neck hitch without need for any additional adapters. The Goose Box IS the adapter. There are other types of adapters that allow a 5th wheel trailer to be towed by a goose neck hitch and the linked article describes all types. The Goose Box is the absolute best way to tow a 5th wheel with...
  view full answer...


• Difference Between the Two Torklift StableLoad Suspension Enhancements for 2009 Ford F-250
  
• As far as the reduction of body roll and sway the # TLA7200 and # TLA7311 will both provide about the same amount of improvement. The difference is that the # TLA7311 allows you to easily unhook the system so that you can go back to the stock ride quality if needed. So you can activate it when you are carrying your camper and then deactivate if and when you remove it and don't need the stiffer ride. If you would plan on leaving the system installed at all times the # TLA7200 would then...
  view full answer...


• Where to Install Fifth Wheel Rails in Cab and Chassis Truck
  
• You want the center of the fifth wheel jaws to be either totally centered over the rear axle of the truck or 1 to 2 inches forward. If you place the rails like that you'd be set.
  view full answer...


• No Power to Trailer Wiring Harness After Installation on a 2009 Ford Escape
  
• Tow Ready trailer wiring harness # 118251 is designed to fit a 2009 Ford Escape that came with the factory tow package. It is possible that if yours did not come with the factory tow package the wiring or something else may not be present or fully functional. In addition to the relays though you can check to see if all of the fuses are good and in place. In the event that you cannot get the harness to work then I recommend installing harness # 118551 which was designed for models that...
  view full answer...


• Malone AirFlow2 Roof Rack for a 2009 Ford Edge with Factory Side Rails
  
• I checked with Malone and they do not list the 50 inch bars as a fit for the 2009 Ford Edge either which means the shorter bars will not fit properly on that vehicle. The reason is that there has to be a certain amount of bar length at each end for the feet and the 50 inch bars are just a little too short. AirFlow2 roof rack # MPG216 is the best option for your Edge.
  view full answer...


• Chucking Experienced With 5th Wheel to Gooseneck Adapter
  
• The attachment point between the fifth wheel king pin and the Ranch Hitch adapter is very tight. Threaded collars attach to the king pin, then the black adapter base threads onto the collars. The upper flange on the black adapter will actually bolt to the underside of the fifth wheel pin box. There will be no movement there. Any movement or chucking will be experienced at the point where the adapter attaches to the gooseneck ball. The chucking would be about what you would experience...
  view full answer...


• Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder on a 2009 Ford F-150
  
• The replacement rubber blocks # TARB-11032-1 for your TracRac SR sliding truck bed rails # TH21501 can be removed once installed. But I wouldn't recommend removing and re-installing often because the rubber blocks tend to dry out. It's a good idea to periodically check and retighten all fasteners and the torque on the rubber expansion blocks # TARB-11032-1 (usually every 4 months). This may be a reason your rubber tape strips are sliding out right now. Since you will remove your rails,...
  view full answer...


• Will the Air Lift Airbags on a 2009 Ford F-150 Work With a 5th Wheel Hitch
  
• The Reese 5th Wheel Trailer Hitch w/ Square Tube Slider part # RP30051 when paired with the Reese Quick-Install Custom Installation Kit part # RP50081-58 will fit your 2009 Ford F-150 with the Air Lift LoadLifter 5000 Air Helper Springs part # AL57228. The upper brackets for the airbags install underneath the frame rails and the side brackets for the 5th wheel hitch install on the outside of the frame rails so there will be no issues whatsoever. The indentation in the frame will allow the...
  view full answer...


• Fifth Wheel Rail Kit Recommendation for a 2009 Ford F-150 Compatible with Husky Hitch
  
• For a custom fifth wheel rail kit confirmed as a fit for your 2009 Ford F-150 that would work great with your Husky hitch you would want the Reese kit part # RP50081-58. This is a custom install kit that will minimize drilling and install time. The price on this kit is great too so there really would be no reason to go with a universal kit like part # RP30035 as this kit will be MUCH easier to install. I attached an install video for you to check out as well.
  view full answer...