Hey George, the Westin HDX grille guard part #W45PF will block your sensors on the front of your 2025 Ford F-150 but it would not block a front facing camera if you had one.
Hi Brandon! For the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long #DX45QR, you will want the Bronze Spring Eye Bushing, 3/4" x 1" x 2-1/2" #14-67. This is a direct replacement for what came in…
Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…
The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part #BWPUCP7520WA or black part #BWPUCP7520BA. B&W does not produce this ladder rack with a chrome or stainless finish.
Bruce, the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles #DX65QR is not the same as the Dexter 072-080-01, so yes the specs are correct. The spring you're referencing is the Dexter 5-Leaf Slipper Spring w/ Flat End for…
Yes, we have seen people fit crossover style tool boxes like you have on top of the B and W Headache Rack part #BWPUCP7520BA that you referenced. You'd need to position the box so that the lid can still open though.
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey Rob, the Adarac Pro Series Custom Truck Bed Ladder #A38ZR does fit your 2022 Jeep Gladiator with the factory bedliner and will work great. There isn't any cutting or drilling required.
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
Hey Eric, Using only 4 of the 5 mounting holes on #DE28YR is not recommended when installing new brakes. There is a chance of failure that could cause a lot more problems, it is best to install them exactly how they should be. With that said by far…
Hey Chris, I went ahead and reached out to Access directly since the photos we have are not as current yet. The Rockstar Mudflap Adjustable Height #A62ZX will come with a cutout for your specific vehicles exhaust. When I spoke with them and gave them…
Installing ta Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like the #325-GH-8045 would not void the warranty of your camper, and Gen-Y makes some of the most durable parts on the market. I really like this as an alternative to…
