Truck Grilles Specs:
Features:
Customize your GMC with this easy-to-install, stainless steel grille. With its mirror finish and heavy-gauge, punch design, this durable, rustproof insert offers up the style that your ordinary, factory grille lacks.
Installation Notes:
Grille has a cutout for the logo
Does not fit Heavy Duty models
More Information >Videos
for Truck Grilles
Help Articles
for Truck Grilles
Expert Answers
for Truck Grilles
When you say "Bike started to come off the back of the trailer" does that mean that you are using the T2 Pro XTR #TH69TX on the back of a trailer? If so then that could be the problem. The…
view full answer...You are right that the strap you mentioned isn't the correct fit, and I checked with Thule and there isn't a standalone strap available for a T2 Pro XT, but there is still an option for you.…
view full answer...The Thule T2 Pro XTR 2 Bike Hitch Mounted Folding Rack, item #TH83JV, will accept up to 5 inch wide tires but, unless you have over 1 inch of clearance between the fender and the front tire on your cruiser with a fender, you will not be able to…
view full answer...The BAKFlip MX4 Tonneau Cover #BAK48330 for the 2022 F-250 short bed has 4 panels. While you are using your Demco Autoslide 5th Wheel Hitch #DM8550024 you will be able to keep one panel laying flat on the bed. There are tow ways you can store the…
view full answer...When adjusting the arms of the #BWRVK3305, you have the option of setting up so the king pin will sit 3 inches forward or 1 inch forward of the axle. I'd set it up at the tallest height, 18-3/4 inches above the floor of…
view full answer...You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…
view full answer...The Furrion 2-in-1 Range Oven with Glass Cover #FR97KR is actually really close to the dimensions of your 21 inch Magic Chef so this would be an easy and great replacement solution that would fit perfectly.
view full answer...The problem isn't that you have a Tundra because you can install a fifth wheel rail kit #RP50084-58 into your 2012 Toyota Tundra without a problem. Any industry standard fifth wheel hitch will fit into the rail kit. The…
view full answer...Yes, you could use Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot Item #T40 with an automatic black water draining system such as Valterra EZ Valve Electric Waste…
view full answer...I went out to our warehouse to measure the Valterra EZ Valve Double Electric Waste Valves part #E84-8 for you. The wire lead on the actual valve is about 8-1/2" long whereas the wire lead on the switch is about…
view full answer...We don't have the specific number but what I think will be more helpful for you is the distance from the rear most portion of the bumper to the hitch pin hole. Which for the #41932 that dimension is 1-1/2 inches. Check…
view full answer...The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W #BWHDRH25187 which has…
view full answer...