Front Receiver Hitch Specs:
Features:
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Installation Notes:
No drilling required for installation
Trimming of front air dam and/or fascia may be required for installation
Tech Tip:
Front tie down brackets will be removed. Hitch cross tube may be mounted with receiver opening in a low or high position. Fascia trimming will be required if mounted in the high position.
More Information >Videos
for Front Receiver Hitch
Help Articles
for Front Receiver Hitch
Expert Answers
for Front Receiver Hitch
Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…
view full answer...I am not sure but I think it's probably going to be difficult to cut that square hole accurately and feed the receiver through it while the air dam is installed. The installation process for the…
view full answer...In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I…
view full answer...You can fit the #C31083 on your 2023 Ford F-150 with the FX4 package but you will need to make modifications. The skid plate can be reinstalled but it will have to be trimmed to get it to fit. Technically the auto air damn can also be modified to…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed.…
view full answer...The Draw Tite hitch part #65067 is a fit for your 2022 Ford F-150 as long as it doesn't have the auto deploying air dam. It would not reduce ground clearance either since it fits the air dam gets cut…
view full answer...The front air dam on your 2023 Ford F-150 Platinum will actually need to be removed to be able to install any of the front hitches. So yes, the front air dam will no longer be operational once you have the EcoHitch Hidden Front Mount Trailer Hitch…
view full answer...We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.
view full answer...The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…
view full answer...High William; we haven't had an F-150 come in for installation with the Active Air Dam so we don't have it in an installation video. I went ahead and…
view full answer...The placement of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR will not restrict air flow into your intercooler or void your warranty on your 2022 Ram 3500. The area the receiver mounts is also the same area the front license plate…
view full answer...