2008 Ford F-250 Super Duty Front Mount Hitch

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes we do! The Curt Front Mount Hitch #C73ZV will be the correct hitch for your 2024 Ram 3500 Diesel Mega Cab. I just double checked with my contact at Curt and they confirmed that it will indeed fit the Diesel Mega Cab models. It will be a no…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an…

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The…

The EcoHitch Hidden Trailer Hitch Receiver #EH35VR may interfere with the Hands-free Liftgate sensor like all of the other hitches. Typically this means you will need to place your foot on either side of the receiver tube in order to activate the…

Yes, it does fit the diesel 2023 Ram 2500 trucks. Our website can be confusing sometimes when it comes to diesel engines but I assure you that the EcoHitch Hidden Front Mount Trailer Hitch item #EH37FR fits both the diesel and gas models. This…

We sure do! The only front hitch that is compatible with the 2023 Ram 3500 with a diesel engine is the EcoHitch item #EH37FR. This hitch is custom fit and bolts to your Ram with included hardware. I have linked an installation video below to help…

From both a cost and a ground clearance/approach angle standpoint I'd recommend going with the Draw-Tite #DT36MR front mounted receiver. The Curt #C31089 front hitch…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires…