1999 Chevrolet Blazer Fluid Filters

Hey Paul, it looks like the OEM springs of your 2021 Ram 2500 are rated for 2,218 lbs per spring whereas the SumoSprings part #SSC-52 are rated for 2,475 lbs.

Hey Gregory, thanks for reaching out! I really like the etrailer Trailer Hitch Receiver #e55ZR as well - I know you'll be happy with it! When it comes to wiring, a 4-Way is used for basic trailer lighting, but since you'll be towing a trailer…

Hello Murray, thanks for reaching out. That appears to be a Westin HDX grille guard. The Replacement Hardware Kit for Westin HDX Grille Guards #57-227PK is what will fit the 2008 Chevy Silverado 2500HD. These HDX grille guards are not universal…

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

Hey Carmen, for the Kenda tire part #KE28KV the warranty is: Kenda's warranty states that the 1-year warranty is for the tire only as opposed to the wheel, and the warranty is through Kenda tires. For the first twelve months from the date of…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

Great news Ross! Thank you for the photo. The clamps on your Yakima FrontLoader part #Y02103 will absolutely work with your Thule WingBar crossbars! That rack is designed to fit a wide range of bar shapes, including aero-style bars like the WingBars,…

I wish we could help but we don't have an online version of the ecohitch instructions we can share. This does come with them but EcoHitch is very protective about their intellectual property so they don't do digital versions. With that said…

When using the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e27SR with the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 you will need to space the leaf spring hangers 25-3/4" apart.

I attached a picture that shows how the Timbren #TGMRTT35D that you referenced gets assembled. The spacer #TA25722-90P00 you referenced would go between the numbers 2 and 3 and you'd be set. See attached picture. You will need to provide a longer…

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.