The wheel/tire size is a little different, but there are a few other subtle differences. • The #CE48810 can handle boats up to 12 feet long, while the #CE48870 can handle a boat up to 14 feet long. • The #CE48810 is 11-1/2 feet long, while the…
Hey Kyle, thanks for reaching out! The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 can handle up to a 14' boat that weighs up to 800 lbs. As long as your SCAMP sailboat is within those specs you'll be good to go.
Hey, thanks. You're not so bad yourself! Going to a larger tire size is possible but there are a few things to think about. Chief among these things is clearance. When going from an 8 inch tire to a 12 inch tire the diameter will increase by 4.4…
Hey Bob, The 48810 comes with a 72" long tongue so the Replacement Extra Long Trailer Tongue for CE Smith Multi-Sport Trailers #CES45FR at 90" would give you an additional 18" to the total length of the trailer.
Cap nuts, like the part #CE10801, are best removed with a pair of pliers to pry it off. Since these are intended to be used only once you need to make sure you have some replacements handy for when you need to put them back on. This part is for a…
The CE Smith Boat Trailer #CE48810 is a great choice to transport your Sun Dolphin Pro and using a trailer dolly will absolutely work for you. You could use the Rack'Em Trailer Dolly #RA20 if you wanted as the tongue weight of your trailer will…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Filters
