Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?
Hi Scott! There is a way to fine tune your Roadmaster Exact Center Steering Stabilizer #RM33RR. I included a link that you will want to scroll down to step 9 to see what you can do, but basically there are jam nuts you can adjust that can do much…
Hey Mark, thanks for providing all the details! I see you ordered the 18.5K Weigh Safe True Tow Weight Distribution Hitch (WDH) #WS49MR. This might be a little heavy for your application, but if you have your trailer weighed down to the GVWR and a…
Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…
...Hi Chris! Quartzsite sure sounds like a great stop - hope you’re soaking up that sun! Yes, the SnapPad StakPad blocks black # SN74VR or white # SN64VR are a universal fit and will work with your...
Hello Steven, thanks for reaching out. You are correct that using a swing away adapter or hitch extender will reduce your hitches carrying capacity by half. We put that warning on the part page for all of the hitch adapters we offer. So if the hitch…
The 8 Inch Jack Foot pads are a must-have for RV enthusiasts. They provide stability and prevent the hassle of leaving behind makeshift supports like plywood. Easy to install, they ensure your RV stays secure on various terrains, making your travels worry
Yes, they are designed for easy installation. A helpful tip is to use dish soap to aid in snapping them on securely. This ensures a snug fit, reducing the risk of losing them during travel, as experienced by some RVers.
While they are designed to stay secure, it's crucial to ensure they are properly installed. Some RVers have noted losing pads, so double-checking their attachment before travel can help prevent this issue.
These pads offer a stable base for your RV jacks, preventing sinking into soft ground. They replace the need for temporary solutions like plywood, ensuring a secure setup at every stop. Their design caters to various terrains, making them ideal for diverse camping locations.
These pads are crafted from robust materials that withstand the rigors of travel. They are designed to be permanent fixtures, resisting wear and tear from frequent use and various weather conditions, ensuring long-lasting performance.
The 8-inch size offers a perfect balance of coverage and portability. They provide ample support for most RV jacks, ensuring stability without adding excessive bulk, making them a popular choice for RV enthusiasts.
Filters
