Utility Mat - Risk Racing

Hey Dan, welcome back! I do indeed have a Black Armour mat designed for trailers. It's the Heavy-Duty Trailer Mat item #BA96AR. It measures 5' wide x 7' long and is made of 1/2" thick rubber. This is the only size and option I have…

The Enclosed Trailer Ramp Heavy Duty Spring - Dual, 96" Wide #CB250D96SHD is rated for doors up to 250 lbs. I'm confident your ramp won't weigh more than that unless you've added weight to it beyond the decking.

Hey Rodney! Congrats on your new trailer! If you door weighs 250 lbs or less the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer item #CB250D96SHD will perfectly. You'll just need to trim the shaft down to fit your trailer's…

I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…

Thank you for the pictures! We do not have an exact replacement but we have something extremely close. It is the LED Trailer Fender Light item #PE89BR. This light measures 3-7/8" long x 1-1/4" tall x 7/8" deep. It is a dual-face LED…

Hey Dan, thanks for reaching out! For your application you'll need the Triple Rocker Switch #37212245 and you'll need to swap out two of the SPST switches with the SPDT RV Switch #37213095 as we don't have any panels that come with the…

The RV Switch #37213095 doesn't have an option to add a faceplate, but we have an alternative with part #37212625 which comes with a small faceplate with it and carries the same on/on function that you're looking for.

Hardware is not included for the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens Item #LPL55CB, but you can make a trip to the local hardware store and pick up some bolts and nuts to secure the license plate, light…

Your photo shows the 7-way trailer wiring setup that we call the RV format. The photo I linked shows an actual trailer plug #A10-7W6 like yours and the circuit arrangement is the same as your photo diagram. For reference, the included article covers…

It sounds like you have tested your truck with other trailers and your trailer with other trucks and have found the wiring circuits to connect and function correctly. This tends to suggest that there is just an issue between the two specific…

The reason that 10 Gauge #10-1-1 or 12 Gauge #12-1-1 wire is recommended for 10" brake assemblies, like part #AKEBRK-35-SA, is because they pull more power than the lights on your trailer. I believe the green wire you are referring to carries…

Yes, you can use 4-leaf springs in place of 3 leaf springs. The extra height of an additional leaf is minimal and won't really affect anything on the trailer. Provided that the springs used are replaced in pairs and not just one side of the…