Filter Results
$327.14 - $344.51
$344.51 - $344.51
Videos
for Truck Bed Step
Help Articles
for Truck Bed Step
Expert Answers
for Truck Bed Step
The only possible option we have that would work with your 2023 Ford F-150 without LED's is the Curt item #C75WR. This custom fit T-connector plugs in behind your tail lights but only works if your truck came from the factory with a 7-way…
view full answer...Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does the…
view full answer...The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…
view full answer...Hey Chris, The Yakima RuggedLine HD Mounting System for LockNLoad Platform #Y43DJ is not compatible with a 2021 Toyota Highlander unfortunately. If you have flush mounted rails that run from front to back then you could go with the following…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you can…
view full answer...Good question, and he only difference in 5th wheel hitches for the long or short bed 2020 Ford F-250 Super Duty is that if you go with a short bed, you will need to get a sliding fifth wheel hitch in order to ensure that your trailer doesn't run…
view full answer...The HitchMate TireStep #HE4040 does not have any additional parts intended to protect your vehicle's rim. However, we haven't had any customers experience this issue using it. Another option is the Powerbuilt Adjustable Tire Step #ALL647596…
view full answer...The battery you use for a break away system needs to be able to power the trailer brakes on full for 15 minutes. A 12 volt battery rated for 5 amp hours is normally used, unless you have 3 axles each with brakes, then you would benefit more from a 9…
view full answer...Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…
view full answer...I spoke with Curt about the Curt Q25 5th Wheel Hitch and was informed that they do not offer the locking jaw mechanism as a replacement part. I know this is not what you wanted to hear but the fact remains. That said, if you want you can replace just…
view full answer...