Hello Kayla, I am so glad you wrote in to us! I was able to confirm with MCD Innovations that you will need the MCD Innovations RV Shade Repair Kit - Solo with Steel Brackets - Switch Controlled Motor #MC82YR to replace your current motor…
Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…
Our closest options for the seals you have pictured are part #SR43FR and #SR63FR. You'll want to take a quick measurement of the seals you have to ensure that these will match up and properly seal your windows. I've attached pictures of their…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hey Gary, thanks for reaching out. I see you already got the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE96XR but I wanted to make sure your question was answered. Yes, the Hellwig Big Wig Rear Anti-Sway Bar #HE96XR fits the 2026 GMC Sierra 3500…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Steve, are you looking for a kit like the part #MC22YR? This repairs the brackets that hold the shades by replacing them. This is a kit that works with the day time and the night time shades like you are looking for.
The most common window edge weather stripping, sometimes referred to as window glazing, for RV's is either #SR43FR at 1/2" x 1/4" or #SR63FR at 3/4" x 5/16". I suggest that you pull the end up on a section you currently have…
Hi Dennis; MCD doesn't have a set number of turns to install the MCD Innovations RV Shade Repair Kit #MC74SR. What you want to do is add some tension, test it, then adjust accordingly until you have it set the way you want it.
Hey Kit, we actually have a version of this scissor jack set that comes with a drill adapter to raise and lower the jacks with part #e64RV. This also comes with a manual crank handle as well. What kind of drill do you have?
Steele Rubber offers top-notch window parts for RV enthusiasts. Their weather strips and seals are known for durability and ease of installation, ensuring your RV windows stay leak-free and secure. Perfect for those looking to replace worn-out factory parts with reliable, long-lasting solutions.
Installing Steele Rubber window seals is straightforward and can be done in about 30 minutes per window. The seals fit perfectly, making the process smooth and hassle-free. Just ensure to tighten screws in a staggered pattern for the best fit.
Yes, Steele Rubber window parts are excellent at preventing leaks. Many have found that using silicone around the rubber and tightening screws properly ensures a leak-free experience, even in older RV models.
Steele Rubber parts often outperform factory-installed options, which can shrink or wear out quickly. Their replacements maintain their integrity over time, providing a reliable seal that keeps dirt and water out.
Absolutely, Steele Rubber window parts are a great fit for older RV models. They provide a perfect replacement for worn-out moldings, ensuring your RV stays protected from the elements.
To maintain Steele Rubber window parts, regularly check and tighten screws, and apply silicone around the seals if needed. This ensures a snug fit and prolongs the life of the seals, keeping your RV windows in top condition.
Filters
