Hey Frank, we have the GE Appliances Microwave part #GE57HR that is close enough in size that it would work great to replace the High Point Micro/Convect oven EC028KD7. This is just a microwave so if you were wanting also the convection oven portion…
We sure do Dan. The Furrion Microwave Trim Kit item #FR85TF is exactly what you need for the Furrion Built-In RV Convection Microwave and Air Fryer item #FR63TF in black. The Furrion Microwave Trim Kit item #FR85TF is black and measures 24-3/16"…
Hey Rick! The EcoHitch Hidden Front Mount Trailer Hitch #EH69CR weighs 72 lbs with the hardware. This is confirmed to fit your 2024 Ford Transit T350. What will you be using the hitch for?
The High Pointe Built-In Convection Microwave with Air Fryer #HP36ZR will fit as a replacement for your current ECO28KD7. It does appear the new unit will easily fit into place but as the RV manufacturer can build 2 units at the same time and they be…
Welcome back Rich and thanks for the information! To replace your Sharp Carousel microwave R-820BK-F, I recommend the Greystone Built-In RV Convection Microwave item #GR27FR. It measures 21" wide x 11" tall x 15-3/4" deep.…
The MCG1311ARB microwave that you mentioned is a 1.3 cu ft stainless steel unit rated for 1,000 Watts. The closest thing we have to that is the Greystone #324-000106 which is a 0.9 cu ft stainless steel unit rated for 1,350 Watts. The Greystone can…
Hello Dennis. The trim piece for the High Pointe Built-In Convection Microwave measures 24" wide by 17" tall. I made a diagram for you which I have included below.
Hey Lee! The Furrion Built-In #FR77AD requires a cutout measuring 20-1/2" wide, 13-3/8" high, and 17-3/4" deep. Since we don't have a way of knowing how much space you have you will need to measure and see if it will fit. As long…
The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as it's the correct dimensions and also works great. We also have it in black with the part #HP99ZR.
Wayne, it does not look like the Greystone Built-In RV Convection Microwave #GR27FR include a mounting bracket. I actually wasn't able to find one at all for that model. They make one for their smaller #324-000106 microwave, but nothing for the…
For your 2019 Forest River Forester Motorhome, check out the: -Greystone Standard RV Microwave w/ Trim Kit #324-000106, & -The Furrion Over the Range RV Convection Microwave #FMCM15SS. Either of these microwaves will work great in your motorhome,…
That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…
High Pointe makes swapping an RV microwave straightforward, with many installs dropping into existing cutouts and mounting points. Pick simple microwave cooking or step up to convection and air fryer options, and double-check your cutout and trim measurements—some setups even reuse the original trim and screws for a clean fit.
Installation is typically straightforward. Remove the trim before fully sliding the unit out or in, and watch sharp edges. If the cavity is at eye level, pre-feed the power cord with a thin rope to the outlet. The unit can be heavier than anticipated, so plan your lift and workspace.
You can get convection and even air fryer options on some models. Certain newer units have bright white underside lights with two intensity settings and a higher max temperature of 450F. Compare capacity and functions you want, then confirm the cutout and trim size match your cabinet.
Bench test it first to confirm the door opens and everything operates. Inspect panels and corners for damage before install. Check that controls don't stick. Verify the cutout and trim size, and confirm you have or can reuse the correct mounting screws. Pre-route the power plug if access is tight.
Often yes, it can be a direct fit. Match your old model number and measure the cutout to confirm. Some built-ins use a trim around 24" wide by 17" tall, so check your opening against that. Keep your old trim plate and the 4 mounting screws if they match, as they've been reused successfully.
Filters
