Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
Hey Jeff, thanks for reaching out. Yes, that setup will be just fine. Doing a single leg and a wall bracket would definitely be sufficient for supporting the #e49RR Dinette Table. We actually offer the 36" Long x 30" Wide as a kit with a…
Hey Jason, welcome back! The 15" x 6" Dexstar Steel Mini Mod Trailer Wheel item #AM20537 will work if you have 2" or more clearance between the side wall of your current tire and your trailer's frame. This wheel is only going to be…
Hi Jim; there is no visible grain on the etrailer Replacement RV Dinette Tabletop #e32ZR. I just pulled one out of the box in our warehouse and just like the picture it is plain white. The only ones with actual wood grain are Maple #e82ZR and Cherry…
Hey John, thanks for the kind words! The Dometic 320 Full-Timer RV Toilet #DOM87FR that you referenced has a 2 year limited lifetime warranty. We would take care of the warranty if needed as long as your bought it from us. Have you had issues with…
Hey David! The B&W Turnoverball #BW73FR does allow the installation of a 5th wheel hitch as well. That is one of the best things about this system. You will need the B&W Companion #BWRVK3500-5W or #BWRVK3400-5W (slider). Both install using…
Hi Tina; the Thomas Payne RV Jackknife Sofa and Kickboard - Fold Down - 62" Wide - McCoy #TP34AR uses a PolyHyde polyester which is specifically designed to combat the flaking you have experienced. It won't hold up forever, but it does tend…
Hey Hugh! You do not need metal valve stems to use the Tire Linc Pro TPMS for RVs and Trailers #LC67VC. This uses cap sensors so they're light enough to work with any valve stem. Metal valve stems are typically recommend for flow through sensors…
Hey Nancy! The Thomas Payne RV Jackknife Sofa w/ Hinges #TP58KR doesn't have any legs. It is designed to sit on an existing base/legs which you can see examples of in the attached picture. I can't tell in the brochure if that is what you have…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
Hey Jeff, thanks for reaching out. Yes, that setup will be just fine. Doing a single leg and a wall bracket would definitely be sufficient for supporting the #e49RR Dinette Table. We actually offer the 36" Long x 30" Wide as a kit with a…
Hey Jason, welcome back! The 15" x 6" Dexstar Steel Mini Mod Trailer Wheel item #AM20537 will work if you have 2" or more clearance between the side wall of your current tire and your trailer's frame. This wheel is only going to be…
Hi Jim; there is no visible grain on the etrailer Replacement RV Dinette Tabletop #e32ZR. I just pulled one out of the box in our warehouse and just like the picture it is plain white. The only ones with actual wood grain are Maple #e82ZR and Cherry…
Hey John, thanks for the kind words! The Dometic 320 Full-Timer RV Toilet #DOM87FR that you referenced has a 2 year limited lifetime warranty. We would take care of the warranty if needed as long as your bought it from us. Have you had issues with…
Hey David! The B&W Turnoverball #BW73FR does allow the installation of a 5th wheel hitch as well. That is one of the best things about this system. You will need the B&W Companion #BWRVK3500-5W or #BWRVK3400-5W (slider). Both install using…
Hi Tina; the Thomas Payne RV Jackknife Sofa and Kickboard - Fold Down - 62" Wide - McCoy #TP34AR uses a PolyHyde polyester which is specifically designed to combat the flaking you have experienced. It won't hold up forever, but it does tend…
Hey Hugh! You do not need metal valve stems to use the Tire Linc Pro TPMS for RVs and Trailers #LC67VC. This uses cap sensors so they're light enough to work with any valve stem. Metal valve stems are typically recommend for flow through sensors…
Hey Nancy! The Thomas Payne RV Jackknife Sofa w/ Hinges #TP58KR doesn't have any legs. It is designed to sit on an existing base/legs which you can see examples of in the attached picture. I can't tell in the brochure if that is what you have…
Received already. Yeow! Perfect fit. Thanks for getting the kit to me so quickly.
Rich
Arlington, TX
RV Dinette Tables with Surface Mount and Color Match Trim
Swap in a sturdy, good-looking dinette without fuss. The surface mount design secures to the floor for a straightforward install in your RV, and the color match trim gives a seamless, built-in look. A solid choice for replacing a lost or worn table while keeping your space looking fresh.
No—Surface mount RV dinette tables were available with rectangle tops. If you prefer an oval to open up space, that option wasn't offered. Choose the rectangle size that best fits your seating and walkway.
Options tied to black trim included white, maple, and cherry tops, and a fully black option wasn't offered. For Color match trim, pick the finish that matches your tabletop and confirm the listed color before you commit.
Two-leg Surface mount setups provide a solid foundation and help prevent rocking or wobble. If stability matters, choose the dual support legs over a single post. This setup has held up well in regular RV use and still looked like new after a year.
Yes, Surface mount tables are made to install directly to the floor. Verify you have open floor space where the bases will sit. The universal design fits a wide range of RV interiors, so it's a practical swap for a missing or worn table.
Filters
