Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR
Hi Lynn; this particular model of the Thomas Payne Trifold RV Loveseat and Sleeper #LC42PX only comes in the Black Granite. The 62" Rest Easy Trifold has more colors available if you're trying to match something. We have the following:…
Hey Fred! You will need to take some measurements to determine if you will have enough clearance with the B&W Gooseneck Pin Box #BW23RV. You can use the following formula: (A + B) - C = Clearance A = Distance from the gooseneck ball center to the…
Hi Jeanette; the Thomas Payne Trifold RV Loveseat and Sleeper - 80" Long #LC64FC is the only thing we have in the Canvas Back Granite color. The closest match with any kind of furniture is the Thomas Payne Dual Reclining RV Loveseat #TP98KR…
Hey Ralph! The Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware #TP76KR requires at least 3" of wall clearance to function properly. Are you upgrading your sofa or did the old one wear out?
Hey Jeff! Yes, the Thomas Payne Seismic Right Arm #TP62AR, Left Arm #TP65AR, and Armless RV Recliner #TP63AR will all connect. Together they will form a complete couch. Just make sure you have 82-1/2" for this to fit in your 2023 Grand Design…
Hey Frank. I checked our specs and with Lippert and the Thomas Payne Seismic Power Loveseat w/ Console item #TP65KR requires a 26" wide entryway. This couch comes in three separate pieces but the seats still measure 27.5" wide x 38"…
Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?
Hello Chris, Thanks for reaching out. I completely understand wanting to confirm this before installing, especially with tight aisles and wall clearance. When the Thomas Payne RV Jackknife Sofa #TP58KR is upright, it measures 30" deep, including…
Hi Kelli, thanks for reaching out. Yes, we offer several Thomas Payne RV recliners that are designed for RV use. The highest weight capacity we have for these recliners is 300 lbs on the Heritage models like #TP52AR and Signature Swivel Glider models…
Hi Mark; according to Lippert the Thomas Payne RV Jackknife Sofa #TP86KR is a "wall hugger." This means it can sit right up against the wall in the upright position. You don't need a certain amount of space behind it.
Very fast service. Shipped out an hour after I ordered it.Thanks!!
Robert
Westfeild, PA
RV Couches and Chairs with 55 Inch Wide fit
A 55 inch wide couch slides into RV living areas without swallowing floor space. These couches keep lounge comfort while keeping a tidy footprint that works in tight layouts. For the best experience, measure your doorway and plan clearance so installation goes smoothly.
Yes, seat belts can be routed between the back and sides of a dual reclining loveseat. For a trifold sleeper, route up through the bottom. Confirm your anchor locations and the belt path before final placement so the belts move freely and aren't pinched.
A 55 inch wide dual recliner loveseat was listed at 168 lbs and breaks into two 84 lb pieces. Verify your couch separates into two sections and whether the backs lift off using a release tab. Have help on hand and stage the pieces near the door before moving them inside.
Plan for about 2 inches of wall clearance for full recline on some 55 inch wide couches. Measure from the wall to the back once placed and test the full range. If reclining feels stiff or you hear a light metal-to-metal pop, reseat the back securely and check the reclining mechanism alignment before use.
Yes, if it breaks down. Some 55 inch wide couches come in two sections and can fit a 24" door, while another needed at least a 26" wide doorway. Measure your opening and confirm the couch separates. Look for a release tab so the back lifts off the base without tools. Expect a tight fit and plan to angle and shimmy the pieces through.
Filters
