Rv Cargo Slides - MORryde

Hey Ethan. From the mounting point of your RV to the top of the carpeted base is going to be 2.31" on the MORryde RV Cargo Slide Tray item #MR78RV. The bottom of the tray sits 1.57" above the mounting point on your RV and the wooden base is…

Hi Chuck! The MORryde RV Cargo Slide Tray - 72" x 26" - 1 Way Slide - 60 Percent Extension - 800 lbs #MR67FR sits 1.6 inches above the floor you mount it on. If you want or need it to be a bit higher off the floor, you can also grab the…

Hello again Bob, On the MORryde RV Cargo Slide Tray - 90" x 29" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR69FR the overall dimensions are 90" long x 29" wide x 6-5/8" tall, the actual tray dimensions are 88-1/4"…

Hi Carmel; the Thetford C223S Cassette Toilet #TH42YE does not come with an exterior door. I do know that some of the doors are specific to the trailer manufacturer. From what Thetford told me, they have some doors available, but they were unable to…

Hey Arthur, The dimensions I'm seeing for a 3500watt Predator Generator show it being 22.8" L x 17.3" W x 20" T so if you're wanting it to sit with the 17.3" side facing out the closest fit would be the MORryde RV Cargo…

No, it will not Glenn. The ICON Trailer Coupler Lock for Flat Lip 2-5/16" Ball Coupler item #AL63DQ requires a flat lip around and behind the receiver like our product pictures show. It looks like your trailer's coupler is similar to the…

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

The MORryde RV Generator Slide Out Tray #MR89RR that you referenced has specific instructions from MORryde that you can't operate a generator when it is sitting on the tray. Even if it was locked in out position.

Hello David, I answered your question that you asked in the comment, but wanted to create it as it's own question so I can include the diagram that Jennifer sent to me. The MORryde RV Cargo Sliding Tray #MR69FR is going to be too wide for your…

The overall outside to outside dimensions of the MORryde Sliding Tray for RV Cargo Compartment #MR84FR is 90 inch by 20 inch.

I don't have any way to look up parts for a specific trailer, if you can send photos I'd be glad to see if we have any options for replacement. That said, it looks like some use them use a fairly standard rectangular taillight for trailers…

From the mounting surface to the top of the sliding shelf floor of the MORryde Generator Tray #MR69RR measures 1-3/4 inches.