Hi Bill! The snap ring style bearing setups have been phased out, so there is not a kit with that replacement included, but we do have Replacement Outer Snap Ring for 35mm, 42mm, and 50mm Dexter Nev-R-Lube Bearings #69-96 which is confirmed for axles…
Hey Jeremy, the closest thing we have to what you are looking for is the Maxxair Low Profile RV roof vent part #MA00-03851. It is an integrated roof vent and lid with a lower profile but the overall height is 4-1/8 inches above the roof line so…
Hey Kaysie, thanks for reaching out! Yes, the B&B Top Rear Corner Trim Cover for RV Seam #BM65XR will work for both the left- and right-hand sides of the RV. Just make sure you don't use screws for the left side of the trailer for the right…
We don't currently carry Trimark entry door locks so I wouldn't be able to get you a specific part for your current lock. I can however get you a replacement entry door lock if you can provide me with the cutout hole measurements. For…
We appreciate you Wayne, welcome back! The Progressive Dynamics PD8355 converter section can be replaced without replacing the entire power center. For lithium batteries, I recommend upgrading to the Progressive Dynamics #PD4655v Replacement…
Hey Scott, thanks for reaching out. At this time, we offer only one size for the Lippert Schwintek Slide-Out System part #LC34VC, and I'm sorry to say we don't have a dimensional diagram for that one. What I can tell you is the 62-5/8"…
Hey Doug, from what I can see, the Camco RV Vinyl Trim Insert #CAM25312-10 and the Camco RV Vinyl Trim Insert #CAM25212 are the exact same. They both are 100' x 1", have the same shape, and are both made from Vinyl. I'm not too sure why…
We got you covered Sherrel, thanks for reaching out! If your Jeep Wrangler has a different bumper than the standard factory, please let me know because that would change which base plate is compatible with your vehicle. This flat tow setup is for a…
Hey Michael, since the part #34466V293B3 is a 3 inch hub to 3 inch spigot that means one side has a 3 inch inner diameter and the other side has a 2-1/2 inch diameter. What are the dimensions of what you have currently?
Hi Craig! The Replacement Shroud for Dometic Brisk RV Air Conditioner - Polar White #DMC27BQ is not the correct replacement shroud for you Brisk II air conditioner. Instead, you should use Replacement RV Air Conditioner Cover for Dometic Brisk Air II…
Hey Jason, thanks for reaching out. At this time Furrion does not offer an upgraded or extended-range antenna for the Vision S+ camera system #FR74AD. The only antenna available is the standard one that comes with the system, and there is not…
Hey Bernie, I checked with MouseBlocker and the PROx part #MB94FR is compatible with side posts like what your battery has so it would work well for you. How bad are the mice for you? Caused much damage?
Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.
Robert
Bloomington, IL
Enhance Your RV Experience with TorkLift
TorkLift RV Trim products are perfect for ensuring your camper fits snugly and securely in your truck bed. They provide the ideal spacing and protection, preventing damage to both your camper and truck. Whether you're replacing makeshift spacers or aligning with existing strips, TorkLift offers a reliable solution for a smooth camping adventure.
TorkLift RV Trim products provide precise spacing, ensuring your camper fits securely in the truck bed. They prevent contact with the truck's bulkhead, offering about 1/4 to 1/2 inch clearance. This setup protects both the camper and truck from damage, making loading and unloading smoother.
TorkLift products replace makeshift solutions like wood spacers, offering a more durable and reliable fit. They align perfectly with existing camper strips, preventing abrasion and ensuring a snug fit. This enhances safety and longevity for both your camper and truck.
Yes, TorkLift products can be mounted on either the truck bed or the camper. Mounting on the truck bed is often preferred to avoid abrasion from rough surfaces like spray-on bedliners. This flexibility allows for optimal alignment and protection.
TorkLift products typically offer about 1/4 to 1/2 inch clearance between the camper and truck. This spacing is crucial for preventing contact and damage, ensuring a smooth slide-in and slide-out process without harming the paint or structure.
TorkLift products are designed to withstand rough surfaces like spray-on bedliners. By mounting them on the truck bed, they avoid direct contact with abrasive surfaces, reducing wear and tear over time. This ensures long-lasting protection and performance.
Filters
