Customers prefer these similar products
TorkLift's rubber bumpers help to prevent damage to the front bulkhead of your truck while you are transporting your camper. Set of 2.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at the TorkLift Rubber Camper Bumpers. These camper bumpers protect the front bulkhead of your truck, which is right behind the cab, while transporting your bed-mounted camper. Now these are heavy duty, rubber cushions that space between the camper and the bulkhead. The bumper is installed on the front of the camper. You'd want to use some butyl tape to create a nice weatherproof joint or weatherproof seal. The butyl tape is not included, but it does come with the necessary hardware to get installed.
So, with this part number, you're going to get two bumpers. You're going to get four quarter inch flat washers and four quarter inch by two and a half inch long bolts or screws. The product is made in the U.S.A. It's covered with limited lifetime warranty. I'll go ahead and pull out one of the screws so show it to you.
Again, these are quarter inch diameter screws that measure two and a half inches long.See, right there, you can either use a socket head or a flat-blade head. Really nice design. Good hardware, but again butyl tape or some type of sealant will need to be used, and that component is not included with this kit. It also comes with detailed installation instructions to walk you through that process step by step. Both these measure the same, so we're just going to take a measurement of one and it applies to the other.
So, overall, length, edge to edge, measures about seven and three quarters of an inch. Overall width at the widest point is going to give us a measurement of about two and one quarter inches. Then, the overall thickness or height is right at two inches. These mount holes are separated apart from another on center by about four and three quarters of an inch. That's going to do it for today's look at TorkLift Rubber Camper Bumpers..
Average Customer Rating: 4.9 out of 5 stars (25 Customer Reviews)
TorkLift's rubber bumpers help to prevent damage to the front bulkhead of your truck while you are transporting your camper. Set of 2.Mounted them in the bed of the truck rather than on the camper. Moved the strips on the camper so that they would line up with the bumpers. I have a Lance Camper that has (2) hard plastic strips that are 1/4" thick and they did not protect the camper from hitting the top bulkhead of the truck. Problem solved - I now have approx. 1/2" clearance and since the rubber bumpers are lined up with the hard plastic strips the camper slides down nicely without damaging any paint. Didn't want to mount them on the camper because the spray-on bedliner is very rough and felt that over time it would abrade that rubber bumper. Mounting them on the truck and centering them to the hard plastic strips on the camper resolves this problem.
Tom B - 11/17/2016
Purchased this item to replace the 2x4 wood spacer I was using in my F350 when carrying my Lance 1172 truck camper. Perfect spacing when installed on the front bed panel. Remember to install them high enough to allow for the camper to be raised when unloading it if you have the Wobblestopper brackets installed as I do. Thanks Etrailer!
Original camper bumpers were too high for my Dodge Ram bed, these TorkLift Camper Bumpers were just what I needed. Mounted them lower on the camper and the the extra depth makes plenty of clearance between the bed and camper. Very easy to mount, just make sure what you are drilling into.
Works as advertised. Well made, heavy duty. Easy to install. Good product.
Ray M - 09/12/2020Excellent product
The quality you expect from torklift, easy install.
Love these. Installed them on a Lance 1172. Works to keep camper from coming too close to front of the truck.
My bumpers were old and torn on my truck camper. This are perfect replacements.
Awesome products and very awesome people and service! Always have a good feeling when ordering something from you guys and gals! You always get my order right and in a very timely matter!
As always, Etrailer delivers! all go od
As advertised, perfect for my camper well worth the wait.
outstanding product aaa+
Your product will be useful. Thank you.
Product as advertised and will work wel l.
Fit perfectly. Would recommend this ite m.
Product is high quality heavy rubber
EAsy install on my 2012 Lance 1050s. eTrailer was great! quick ship, good communication, highly recommend!!
They do JUST what they need to do!
fast shipper, good product.
Do you have a question about this RV Trim?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.