RV Power Inlets - Standard Connector, Hughes Autoformers

Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.

Hey John, we have 30 amp twist in power inlets from other brands like Hughes part #HU66VR but at this time we do not have a Furrion brand option. What drew you to the Furrion?

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

Hey Jesse! If it's just the LED light strip that's peeling off, then I recommend picking up some strong adhesive double-sided take and securing it back in place with that, but if you're talking about the "bar" that the light…

Hi Aaron, The mounting holes are 2.44 inches (2-7/16 inches) both across and vertically for the SmartPlug RV/Marine Data Port Inlets. This is available in three different colors: - White: SmartPlug RV/Marine Data Port Inlet #SM66MJ - Black: SmartPlug…

Hello Jorge, thanks for reaching out. The Shocker Hitch Air Ball Mount #SHK46VR weighs about 47 lbs. Leave a reply below with any other questions or comments and I am happy to get back to you.

Hey Clint, I attached a diagram that has all of the dimensions of the front of the Smartplug part #SM36MJ but the dimension you asked for is 1-3/4 inches.

Yes, the dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector, found in Gray #SM87FR or White #SM77FR is as follows: Receptacle - 3.25" wide x 4.5" tall x 3.75" long (or deep) Plug - 3" wide x 3" tall x 4"…

Hey Troy, the Loadstar ST235/75R15 Radial Off-Road Tire w/ 15" Aluminum Wheel #KE92JR is designed to fit standard length studs on trailer hubs. You wouldn't need a special hub to use these.

Hey William, yes the Gen-Y Torsion 2-Ball Mount #325-GH-1125 that you referenced would work great in the 2.5 inch hitch of your 2024 Ford F-350 that is towing your 30 foot Airstream Globetrotter. This will do a great job providing a bit of cushioning…

Hey Larry, the Smartplug part #SM96MJ is the correct part you are looking for as this has ability to have an ethernet connection for your Starlink and a coax for the cable connection. For the ethernet connector you would need the part #SM38MJ and…