Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hey Steve, yes the Dexter Nev-R-Adjust Brake Assembly set part #23-458-459 is the correct set for your Airstream based on the part numbers you mentioned. Also the hub/drum part #8-388-80UC3 that you referenced as well would be correct for your…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC
Optronics RV Interior Lights for Surface Mount
Light up your camper with Optronics surface mount RV interior lights that put out bright, clean illumination. The design makes add-ons and replacements straightforward on ceilings or under cabinets, with choices that include a built-in switch for simple control.
Some include a built-in switch, and certain styles have a 2-position switch with a dim setting. Others do not have a switch, so plan a separate switch if needed. If you want the switch in a specific spot, confirm its location before mounting.
They put out strong, clean light for trailers and campers. A pair can fully light an 8.5x20 enclosed trailer with glossy white walls and ceiling. In a plywood interior, plan on using 3 spaced out on the ceiling. For detailed task lighting, 4 spread front to back gives broad, bright coverage.
Tie the new light's black lead to the existing +12V feed and ground the white lead to a suitable metal surface. If the old fixture grounded through its mounting screws, add a ring terminal to the white wire under a mounting screw for a solid ground. Confirm the circuit is 12V and polarity is correct before final mounting.
Match the footprint for an easy direct replacement. Verify wiring: white is ground and black is power. If your current light used the mounting screws for ground, run a separate white ground lead for 2-wire LEDs to a good metal surface. Lenses can fit tight; use a blunt tool at the cover slots to ease the lens off without prying the edge.
Filters
