Videos
for RV Door Parts
Help Articles
for RV Door Parts
Expert Answers
for RV Door Parts
Thank you for the photos! To replace your old Lippert (LCI) slam latch you can use the Lippert Standard Baggage Door Latch Kit - Black #LC317649, which is going to be the same size as your old slam latch and will fit perfectly in the existing…
view full answer...Hey Cliff, with the Replacement Controlled Motion Hinge #LC95VR to get the desired effect where the door doesn't swing open or closed all you have to do is replace is a single hinge and not all three.
view full answer...Although we do not have the instructions for the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR that you mention I was able to get in contact with Lippert, and they were able to send over the instructions. The instructions are as…
view full answer...We don't have the exact screen door handle for the 990003-01 kit, but we do have the Replacement Screen Door Latch for Left Swinging RV Entry Door #LC201472 that could work just as well. This will replace latch for…
view full answer...Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This…
view full answer...If the door hinge on your 2005 Winnebago Vectra has a similar design then yes, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf #LC95VR will work as a replacement. This is a universal product that has an overall length of…
view full answer...I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…
view full answer...Hey Tony, thanks for writing in, and that's a really smart question. The answer is yes, the fresh water tank should be full when adjusting the 16,000 lb Equal-i-zer Weight Distribution System #EQ90-00-1600. What you…
view full answer...While we don't carry a hinge with the exact leaf setup as what you have pictured, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR is still a viable replacement option. Since the…
view full answer...The Lippert Lippert Slam Latch for RV Doors #LC54PJ has a bit of a unique design since it tapers inward as you get closer to the plunger, so you wouldn't want to swap it out with anything else unless you were ok with…
view full answer...Nope, the Replacement Entry Door Hinge for RV - 6 Leaf - White #LC198295 is NOT a controlled motion friction hinge. Just in the interest of being thorough, a friction hinge is available with part #LC22NJ, but it sounds like you are trying to avoid…
view full answer...Hi Jimmy, The Global Link Locking Baggage Lock Actuator Set with Mounting Plate #GL34FR you referenced requires a cutout hole measuring approximately 3.75" x 3.75" and a door thickness…
view full answer...