Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…
That is correct Trevor! The Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel item #PD4590K18LS8 would be the correct replacement. This is a 90-amp 2-in-1 AC/DC distribution panel and converter charger that…
Hello Paul, There is one thing I like to have when I'm out enjoying the wilderness, and that's a toilet that feels like I'm at home. Well, I found just that for you. Since you're replacing the Dometic 300 in your 2021 Winnebago Minnie…
Hey Arlen, welcome back! For a hitch I recommend the Curt Adjustable Width Trailer Hitch #13703. This Class III hitch fits 22" to 72" wide trailer frames and can be bolted or welded on for installation. It has a max tongue weight of 350 lbs…
Hey Eumir, the 9610007991 Dometic Connect Essential RV Thermostat RV-C #DMC79JF does not have the ability to control the two heat sources independently. It can control both but it does not have ability to pick between either.
Your current microwave has the dimensions of 29-15/16 W x 16-7/16 H x 15-3/8 D which is almost identical to the Furrion part #FMCM15SS which we know works really well and is reliable so it would be a really great and easy solution.
Hey Tim, I checked out your Predator 5000 generator and it does use a quick connect propane connector like what the part #CAM57629 provides so yes this would work. How do you like the Predator generator?
Hey Robert & Carol, That part number comes back to a custom order piece. Is this the channel on the side of your RV that the fabric from your awning slots into, like part #LC715216? If you'd like to email me some pictures I'd be happy to…
Hello Kenneth, Thanks for writing in. I don’t have a database that shows exactly what was installed in every camper, but based on my research, your 2020 Transcend Xplor 243BH most commonly came with a 6-gallon Dometic (Atwood-style) water heater.…
Hey Pam, welcome back! To replace your Pentair Shurflo Revolution 4008 Series By-Pass Pump, I recommend the Seaflo Diaphragm Pump for Boats and RVs item #SE57FR. This is a 12v powered three gallon per minute pump that is rated up to 55 psi. It works…
Hey John! Since you have the same number of teeth the Replacement 24 Tooth Pinion Spur Gear for Power Gear RV Slide Outs #LC86EX will likely work as a replacement. I would measure the outer diameter as well. If it matches the 1.417" measurement…
Hey Ryan! The SuperSprings Custom Suspension Stabilizer and Sway-Control Kit #SSA24 will fit your 2023 Ram 3500. It is compatible with SRW and DRW trucks so it doesn't matter either way. It is also compatible on models with and without factory…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
RV Door Parts for secure, smooth access
Solid replacements keep your rig secure and easy to use. Measure your opening and door thickness first; European style entry locks need a 7-7/16" x 3-3/4" cutout and that setup can limit keyless options, while other keyless locks can store up to 256 entry codes. You'll also find baggage door slam latches that fit 1-1/4" thick doors and can use a mounting plate if needed, controlled motion hinges that work with just one hinge, and 12" x 12" screen sliders that can be trimmed.
Sometimes, but that style uses a unique 7-7/16" tall x 3-3/4" cutout, so options are limited. A standard RV latch won't typically drop into that opening. Verify your door thickness and latch style first, then look for a keyless handle built for that same cutout.
No, replacing a single hinge can provide the controlled effect. Verify hinge size and hole spacing to match your door. If you're upgrading ramp or heavy doors, consider heavier-duty hinges and secure with appropriate fasteners; drilling and lagging can be used when welding isn't preferred.
Measure the cutout and door thickness before ordering. Some European style locks fit a 7-7/16" tall x 3-3/4" wide cutout and list a minimum door thickness like 1-1/2". It's easy to remove a few screws to measure your opening. Check whether your door uses a standard plunger and strike plate or a rotary latch with a hidden plunger in the frame.
Confirm your door thickness; some fit 1-1/4" thick doors. If your door lacks a mounting plate, plan to add one. Many are direct replacements, but measure your opening and cam engagement to match what you have. Keys alike options can simplify access across multiple doors.
Filters
