Hi Robert; you could use the LaSalle Bristol Waste Valve #34466N11AA as a replacement but the handle will sit underneath the trailer right at the valve. Looking at the Grand Design parts site it looks like you have a 1-1/2" Valterra with a…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hey Michael, you'd instead want the Furrion Chill Low Profile part #FR79TQ which comes with the needed install kit that includes the controller, air box, and thermostat. The part #FR99TQ that you referenced only includes the upper unit. Are you…
Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…
Hey Tyler, yes, as long as your factory jounce bumper and bracket are still in the original location, the Firestone air bag kit #F64XV can absolutely fit your lifted Silverado. You’ll just need the right Firestone spacer to restore air-spring height.…
Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part #LG-146060. For a lead jack repair kit use…
Hi Jeff, great question, and you’re definitely on the right. I know how tiring it can be when the RV feels like it’s leaning or getting pushed around, especially in wind or on curves. The Timbren kit part #TFER35092LB is a solid upgrade if you’re…
Hey Andersen, without any type of attachment installed on the Power Mountain TallBoy Off Road Bottle Jack part #PM34FR the height is 9 inches when fully retracted and then 15 when extended. The lift range is right around 6-1/2 inches. Would that work…
Hello Gary, thanks for reaching out. The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR has a lift (throw) range from 8.5 inches to 37.75 inches. So whatever you’re planning to lift with it, you’ve got plenty of headroom and reach based on that…
Hey Frank, since Atwood is no longer in business we can't get replacement legs for their setups which means your best option is to replace everything like with the Lippert #LG-4 that you referenced. We do know that the Lippert kits do fit the…
Hi Brad; I think your best bet is to either get three more of the Hemco LTD leaf springs or go ahead and replace all four. The #e54SR and #DX23CR match the spring eye to spring eye measurement but some of the other measurements don't match, at…
Filters
