Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52” x 32” is going to be completely reasonable depending on the material. You can use whatever top best fits the space…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall with…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Tom, thanks for reaching out. The Progressive Dynamics 9300 Series is lithium compatible, but it is not a direct replacement for your complete WFCO WF-8735P power center. Since you are looking to upgrade to LiFePO4 and replace the existing unit,…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Lisa! I did some digging online and while I don't know what the exact bolt mount dimensions are for your Lagun table leg, I do believe that the Telescoping Dinette Table Leg #TX73VJ uses the same 4" on-center 6-bolt pattern (see attached…
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The Everchill…
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC
RV Dinette Table with 38L x 22W Inch
Sized right for compact booths, this RV dinette table at 38l x 22w inch helps you make the most of a tight slide or nook. Measure your seating bases and aisle clearance to confirm the surface area and corners land where you need them.
Yes, match a 38L x 22W inch tabletop with a cushion set that has two seat cushions and two back cushions. Ordering a single quantity of a complete cushion set can simplify the swap. Double-check your booth is the standard two seat style.
A standard two seat dinette uses two seat cushions and two back cushions. Choose a cushion set that includes both pairs so one quantity covers everything. Make sure your booth is the standard two seat style before ordering.
First, verify you have a standard two seat dinette. Then check that 38L x 22W inch matches the space between your seats and back cushions. If you're adding cushions too, confirm the set includes two seat cushions and two back cushions so the fit lines up.
It can if your booth is a standard two seat layout. Confirm your booth dinette is the standard two seat style and that the tabletop footprint matches your seating and cushion spacing. If you're also refreshing cushions, a set with two seat cushions and two back cushions can complete the booth with one quantity.
Filters
